I’m attempting to couple OpenFAOM (v2006) and CalculiX (2.17). I can successfully run the 3d tube case with preCICE 2.2.0 and the adapters I have compiled. However, when I attempt my own FSI problem I am never able to get the two solvers to fully connect. The connection file is written and it appea…

Hi, it looks like OpenFOAM does not call preCICE. Is the OF adapter loaded in the controlDict? You can see here in the Load the Adapter in the documentation: Configure the OpenFOAM adapter | preCICE - The Coupling Library Looking at the config file, I would also suggest increasing max-used-iterati…

Connection never accepted

Using preCICE

Mike_Tree February 23, 2021, 4:16pm 3

Indeed, this was the issue for those log files. I’m back to this issue:

Topic		Replies	Views
CalculiX not being linked to preCICE properly Official adapters and tutorials openfoam , calculix	18	2540	January 2, 2022
Simulation get stuck when running in parallel Official adapters and tutorials openfoam , adapters , calculix	5	661	November 8, 2021
STUCK at ---[precice] Synchronize participants and close communication channels Official adapters and tutorials openfoam , adapters , dealii , inactive	10	711	January 30, 2024
OpenFOAM/CalculiX FSI YAML::BadFile Error Official adapters and tutorials openfoam , adapters , configuration , calculix , fsi	4	635	February 9, 2021
Using preCICE with Helyx OS or SimWorks. How to do it? Official adapters and tutorials openfoam , calculix	7	726	November 6, 2020

Connection never accepted

Related Topics