Perpendicular flap case：Cannot run the case after changing flap model

[zyx]

Could you please help me see what went wrong with the caculix setup？

Here are the files from caculix：
main.inp (412 Bytes)
allinone.inp (1.2 MB)
fixed.nam (2.9 KB)
interface.nam (3.0 KB)
config.yml (224 Bytes)

This is precice-config：
precice-config.xml (2.3 KB)

Thanks a lot!

[Makis]

I don’t know much about CalculiX, but comparing with our config, Nsurface appears:

• in the inp file: tutorials/flap.inp at 0482e5b4d3e1604dd031d2b113a2aaa63733c9a8 · precice/tutorials · GitHub, where you have interface
• In the .nam file: tutorials/interface_beam.nam at 0482e5b4d3e1604dd031d2b113a2aaa63733c9a8 · precice/tutorials · GitHub, where you have fixed

Note that the N, S etc in front of names in the CalculiX config is important. You probably want to look into the CalculiX documentation.