Continuing the discussion from Error in writing watch-point for received mesh : [lastposition_before_divergence_0235s] [image] Error in writing watch-point for received mesh I have increased the accuracy in FASTEST to less than 1e-6 normalize error, and I used the parameters “50, and 10” that y…

[image] Alphaoo1: Summary: With help of @KyleDavisSA , I was able to run the interFoam+CCX dam breaking simulation. Initially, the Young’s Modulus of the material was 10 times less than what it actually should be. I was also using the filter limit for QR2 too high. Forces were included in the a…

IQN fails for quickly changing forces during wetting in a free-surface FSI problem

Using preCICE

Alphaoo1 August 23, 2022, 8:10am 17

@O_K Sorry for the late reply.

Can you please elaborate on what you mean by “doesn’t run well”?

FSI with interFoam and CalculiX: Convergence

Topic		Replies	Views
3D coupling OF/Fenics: watchpoint function, OF output forces and serial coupling procedure Using preCICE openfoam , adapters , fsi , fenics	13	615	May 26, 2022
Problems with nearest-neighor mapping on conforming interface Using preCICE openfoam , adapters , fsi	11	789	January 3, 2022
ERROR：The linear system of the RBF mapping from mesh Calculix_Mesh to mesh Fluid-Mesh-Nodes has not converged Using preCICE openfoam , calculix , fsi	19	1112	April 1, 2021
OpenFOAM-Calculix RBF mapping error？The rbf mapping of several nodes at the interface is incorrect Using preCICE openfoam , data-mapping , calculix , fsi	4	323	October 20, 2023
Using quasi 2D-3D coupling Set ID Found 2D-3D mapping results in a 2D mesh of size 200 from the 400 points in 3D space. ERROR: Cannot apply forces to one or more interface nodes Official adapters and tutorials openfoam , calculix	8	278	October 9, 2023

IQN fails for quickly changing forces during wetting in a free-surface FSI problem

Related Topics