************************************************************

CalculiX Version 2.15, Copyright(C) 1998-2018 Guido Dhondt
CalculiX comes with ABSOLUTELY NO WARRANTY. This is free
software, and you are welcome to redistribute it under
certain conditions, see gpl.htm

************************************************************

You are using an executable made on Sa 15. Dez 15:34:34 CET 2018
 Decascading the MPC's

 Determining the structure of the matrix:
 number of equations
 280
 number of nonzero lower triangular matrix elements
 3224

Starting CHT analysis via preCICE...
 Using up to 1 cpu(s) for the stress calculation.

 Using up to 1 cpu(s) for the heat flux calculation.

 Using up to 1 cpu(s) for the symmetric stiffness/mass contributions.

 Factoring the system of equations using the symmetric spooles solver
 Using 1 cpu for spooles.

 Using up to 1 cpu(s) for the stress calculation.

 Using up to 1 cpu(s) for the heat flux calculation.

About to enter preCICE setup in Calculix with names CalculiX and config.yml 
Setting up preCICE participant CalculiX, using config file: config.yml
---[precice]  This is preCICE version 2.1.0
---[precice]  Revision info: v2.1.0-2-g42abc38c
---[precice]  Configuring preCICE with configuration "./precice-config.xml"
---[precice]  I am participant "CalculiX"
---[precice]  Setting up master communication to coupling partner/s
---[precice]  Masters are connected
---[precice]  Setting up preliminary slaves communication to coupling partner/s
---[precice]  Receive global mesh Fluid-Mesh
---[precice]  Prepare partition for mesh Solid-Mesh
---[precice]  Gather mesh Solid-Mesh
---[precice]  Send global mesh Solid-Mesh
---[precice] ERROR:  The provided mesh "Solid-Mesh" is empty. Please set the mesh using setMeshXXX() prior to calling initialize().
[XDEM-laptop:26711] *** Process received signal ***
[XDEM-laptop:26711] Signal: Segmentation fault (11)
[XDEM-laptop:26711] Signal code: Address not mapped (1)
[XDEM-laptop:26711] Failing at address: 0xe9
[XDEM-laptop:26711] [ 0] /lib/x86_64-linux-gnu/libpthread.so.0(+0x128a0)[0x7f6baebf48a0]
[XDEM-laptop:26711] [ 1] /usr/lib/x86_64-linux-gnu/libstdc++.so.6(_ZSt18_Rb_tree_incrementPSt18_Rb_tree_node_base+0x37)[0x7f6baf137bd7]
[XDEM-laptop:26711] [ 2] /usr/local/lib/libprecice.so.2(_ZNSt17_Rb_tree_iteratorISt4pairIKNSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEEEN7precice5utils5EventEEEppEv+0x1b)[0x7f6bb03caf53]
[XDEM-laptop:26711] [ 3] /usr/local/lib/libprecice.so.2(_ZN7precice5utils13EventRegistry8finalizeEv+0xcb)[0x7f6bb03c3793]
[XDEM-laptop:26711] [ 4] /usr/local/lib/libprecice.so.2(_ZN7precice4impl19SolverInterfaceImpl8finalizeEv+0x101c)[0x7f6bb03776c0]
[XDEM-laptop:26711] [ 5] /usr/local/lib/libprecice.so.2(_ZN7precice4impl19SolverInterfaceImplD1Ev+0x97)[0x7f6bb036f33b]
[XDEM-laptop:26711] [ 6] /usr/local/lib/libprecice.so.2(_ZNKSt14default_deleteIN7precice4impl19SolverInterfaceImplEEclEPS2_+0x22)[0x7f6bb034fd26]
[XDEM-laptop:26711] [ 7] /usr/local/lib/libprecice.so.2(_ZNSt10unique_ptrIN7precice4impl19SolverInterfaceImplESt14default_deleteIS2_EED1Ev+0x49)[0x7f6bb034fc71]
[XDEM-laptop:26711] [ 8] /usr/local/lib/libprecice.so.2(_ZN7precice15SolverInterfaceD1Ev+0x18)[0x7f6bb034f23e]
[XDEM-laptop:26711] [ 9] /usr/local/lib/libprecice.so.2(_ZNKSt14default_deleteIN7precice15SolverInterfaceEEclEPS1_+0x22)[0x7f6bb04541f8]
[XDEM-laptop:26711] [10] /usr/local/lib/libprecice.so.2(_ZNSt10unique_ptrIN7precice15SolverInterfaceESt14default_deleteIS1_EED1Ev+0x49)[0x7f6bb04540e3]
[XDEM-laptop:26711] [11] /lib/x86_64-linux-gnu/libc.so.6(__cxa_finalize+0xf5)[0x7f6bae0b76c5]
[XDEM-laptop:26711] [12] /usr/local/lib/libprecice.so.2(+0xa97063)[0x7f6bafee6063]
[XDEM-laptop:26711] *** End of error message ***
./runSolid: line 14: 26711 Segmentation fault      (core dumped) ccx_preCICE -i Solid/flap -precice-participant CalculiX