
************************************************************

CalculiX Version 2.17, Copyright(C) 1998-2020 Guido Dhondt
CalculiX comes with ABSOLUTELY NO WARRANTY. This is free
software, and you are welcome to redistribute it under
certain conditions, see gpl.htm

************************************************************

You are using an executable made on Thu Jul 23 21:43:50 CEST 2020
 Decascading the MPC's

 Determining the structure of the matrix:
Starting FSI analysis via preCICE using the geometrically linear CalculiX solver...
 Using up to 1 cpu(s) for the stress calculation.

 Using up to 1 cpu(s) for the energy calculation.

 ++CMT DEBUG: Courant criterion for stability time inc=4.857127e-06

 Using up to 1 cpu(s) for the symmetric stiffness/mass contributions.

About to enter preCICE setup in Calculix with names Solid and config.yml 
Setting up preCICE participant Solid, using config file: config.yml
[1696745957.201759] [c01r2n02:8243 :0]    ucp_context.c:671  UCX  WARN  network devices 'mlx5_2:1','mlx5_3:1' are not available, please use one or more of: 'docker0'(tcp), 'eno1'(tcp), 'flannel.1'(tcp), 'ib0'(tcp), 'mlx5_0:1'(ib), 'mlx5_1:1'(ib)
---[precice] [0m This is preCICE version 2.5.0
---[precice] [0m Revision info: no-info [git failed to run]
---[precice] [0m Build type: Debug
---[precice] [0m Configuring preCICE with configuration "../precice-config.xml"
---[precice] [0m I am participant "Solid"
Set ID Found 
Read data 'Force' found with ID # '3'.
Write data 'Displacement' found with ID # '2'.
---[precice] [0m Setting up primary communication to coupling partner/s
---[precice] [0m Primary ranks are connected
---[precice] [0m Setting up preliminary secondary communication to coupling partner/s
---[precice] [0m Prepare partition for mesh Solid-Mesh
---[precice] [0m Gather mesh Solid-Mesh
---[precice] [0m Send global mesh Solid-Mesh
---[precice] [0m Setting up secondary communication to coupling partner/s