prasad@XDEM-laptop:~/precice-2.0.2/build$ make test_base -- Found Git: /usr/bin/git (found version "2.17.1") -- Revision status: Detection failed [ 0%] Built target GitRevision [ 64%] Built target precice [100%] Built target testprecice UpdateCTestConfiguration from :/home/prasad/precice-2.0.2/build/DartConfiguration.tcl UpdateCTestConfiguration from :/home/prasad/precice-2.0.2/build/DartConfiguration.tcl Test project /home/prasad/precice-2.0.2/build Constructing a list of tests Done constructing a list of tests Updating test list for fixtures Added 0 tests to meet fixture requirements Checking test dependency graph... Checking test dependency graph end test 1 Start 1: precice.acceleration 1: Test command: /usr/bin/mpiexec "-n" "4" "/home/prasad/precice-2.0.2/build/testprecice" "--run_test=AccelerationTests" 1: Environment variables: 1: PRECICE_ROOT=/home/prasad/precice-2.0.2 1: Test timeout computed to be: 20 1: Running 12 test cases... 1: Running 12 test cases... 1: Running 12 test cases... 1: Running 12 test cases... 1: 1: *** No errors detected 1: 1: *** No errors detected 1: 1: *** No errors detected 1: 1: *** No errors detected 1: 1/18 Test #1: precice.acceleration ............. Passed 0.30 sec test 2 Start 2: precice.action 2: Test command: /usr/bin/mpiexec "-n" "4" "/home/prasad/precice-2.0.2/build/testprecice" "--run_test=ActionTests" 2: Environment variables: 2: PRECICE_ROOT=/home/prasad/precice-2.0.2 2: Test timeout computed to be: 20 2: Test setup error: no test cases matching filter or all test cases were disabled 2: Running 6 test cases... 2: Test setup error: no test cases matching filter or all test cases were disabled 2: Test setup error: no test cases matching filter or all test cases were disabled 2: (0) 20:57:20 [action::PythonAction]:162 in initialize: WARNING: No function void vertexCallback() in python module "TestOmitAction1" found. 2: (0) 20:57:20 [action::PythonAction]:170 in initialize: WARNING: No function void postAction() in python module "TestOmitAction1" found. 2: (0) 20:57:20 [action::PythonAction]:170 in initialize: WARNING: No function void postAction() in python module "TestOmitAction2" found. 2: (0) 20:57:20 [action::PythonAction]:162 in initialize: WARNING: No function void vertexCallback() in python module "TestOmitAction3" found. 2: (0) 20:57:20 [action::PythonAction]:170 in initialize: WARNING: No function void postAction() in python module "TestOmitAction3" found. 2: 2: *** No errors detected 2: 2/18 Test #2: precice.action ................... Passed 0.35 sec test 3 Start 3: precice.com 3: Test command: /usr/bin/mpiexec "-n" "4" "/home/prasad/precice-2.0.2/build/testprecice" "--run_test=CommunicationTests:!CommunicationTests/MPIPorts" 3: Environment variables: 3: PRECICE_ROOT=/home/prasad/precice-2.0.2 3: Test timeout computed to be: 20 3: Running 14 test cases... 3: Running 14 test cases... 3: Running 14 test cases... 3: Running 14 test cases... 3: 3: *** No errors detected 3: 3: *** No errors detected 3: 3: *** No errors detected 3: 3: *** No errors detected 3: 3/18 Test #3: precice.com ...................... Passed 0.27 sec test 5 Start 5: precice.cplscheme 5: Test command: /usr/bin/mpiexec "-n" "4" "/home/prasad/precice-2.0.2/build/testprecice" "--run_test=CplSchemeTests" 5: Environment variables: 5: PRECICE_ROOT=/home/prasad/precice-2.0.2 5: Test timeout computed to be: 20 5: Running 41 test cases... 5: Running 42 test cases... 5: Running 41 test cases... 5: Running 41 test cases... 5: 5: *** No errors detected 5: 5: *** No errors detected 5: 5: *** No errors detected 5: 5: *** No errors detected 5: 4/18 Test #5: precice.cplscheme ................ Passed 0.84 sec test 6 Start 6: precice.io 6: Test command: /usr/bin/mpiexec "-n" "4" "/home/prasad/precice-2.0.2/build/testprecice" "--run_test=IOTests" 6: Environment variables: 6: PRECICE_ROOT=/home/prasad/precice-2.0.2 6: Test timeout computed to be: 20 6: Running 4 test cases... 6: Running 9 test cases... 6: Running 4 test cases... 6: Running 4 test cases... 6: 6: *** No errors detected 6: 6: *** No errors detected 6: 6: *** No errors detected 6: 6: *** No errors detected 6: 5/18 Test #6: precice.io ....................... Passed 0.27 sec test 7 Start 7: precice.m2n 7: Test command: /usr/bin/mpiexec "-n" "4" "/home/prasad/precice-2.0.2/build/testprecice" "--run_test=M2NTests:!M2NTests/MPIPortsCommunication" 7: Environment variables: 7: PRECICE_ROOT=/home/prasad/precice-2.0.2 7: Test timeout computed to be: 20 7: Running 2 test cases... 7: Running 2 test cases... 7: Running 2 test cases... 7: Running 2 test cases... 7: 7: *** No errors detected 7: 7: *** No errors detected 7: 7: *** No errors detected 7: 7: *** No errors detected 7: 6/18 Test #7: precice.m2n ...................... Passed 0.41 sec test 9 Start 9: precice.mapping 9: Test command: /usr/bin/mpiexec "-n" "4" "/home/prasad/precice-2.0.2/build/testprecice" "--run_test=MappingTests:!MappingTests/PetRadialBasisFunctionMapping" 9: Environment variables: 9: PRECICE_ROOT=/home/prasad/precice-2.0.2 9: Test timeout computed to be: 20 9: Test setup error: no test cases matching filter or all test cases were disabled 9: Test setup error: no test cases matching filter or all test cases were disabled 9: Test setup error: no test cases matching filter or all test cases were disabled 9: Running 20 test cases... 9: (0) 20:57:22 [mapping::NearestProjectionMapping]:134 in computeMapping: WARNING: 3D Mesh "InMesh" does not contain triangles. Nearest projection mapping will map to primitives of lower dimension. 9: (0) 20:57:22 [mapping::NearestProjectionMapping]:134 in computeMapping: WARNING: 3D Mesh "InMesh" does not contain triangles. Nearest projection mapping will map to primitives of lower dimension. 9: 9: *** No errors detected 9: 7/18 Test #9: precice.mapping .................. Passed 0.37 sec test 10 Start 10: precice.mapping.petrbf 10: Test command: /usr/bin/mpiexec "-n" "4" "/home/prasad/precice-2.0.2/build/testprecice" "--run_test=MappingTests/PetRadialBasisFunctionMapping" 10: Environment variables: 10: PRECICE_ROOT=/home/prasad/precice-2.0.2 10: Test timeout computed to be: 20 10: Running 25 test cases... 10: Running 25 test cases... 10: Running 25 test cases... 10: Running 25 test cases... 10: (2) 20:57:22 [mapping::PetRadialBasisFctMapping]:573 in computeMapping: WARNING: RBF rescaling linear system has not converged. Deactivating rescaling! 10: (3) 20:57:22 [mapping::PetRadialBasisFctMapping]:573 in computeMapping: WARNING: RBF rescaling linear system has not converged. Deactivating rescaling! 10: (1) 20:57:22 [mapping::PetRadialBasisFctMapping]:573 in computeMapping: WARNING: RBF rescaling linear system has not converged. Deactivating rescaling! 10: (0) 20:57:22 [mapping::PetRadialBasisFctMapping]:573 in computeMapping: WARNING: RBF rescaling linear system has not converged. Deactivating rescaling! 10: KSP Object:Coefficient Solver(solverC_) 4 MPI processes 10: type: gmres 10: GMRES: restart=30, using Classical (unmodified) Gram-Schmidt Orthogonalization with no iterative refinement 10: GMRES: happy breakdown tolerance 1e-30 10: maximum iterations=10000 10: tolerances: relative=1e-09, absolute=1e-50, divergence=10000. 10: left preconditioning 10: using nonzero initial guess 10: using PRECONDITIONED norm type for convergence test 10: PC Object:(solverC_) 4 MPI processes 10: type: bjacobi 10: block Jacobi: number of blocks = 4 10: Local solve is same for all blocks, in the following KSP and PC objects: 10: KSP Object: (solverC_sub_) 1 MPI processes 10: type: preonly 10: maximum iterations=10000, initial guess is zero 10: tolerances: relative=1e-05, absolute=1e-50, divergence=10000. 10: left preconditioning 10: using NONE norm type for convergence test 10: PC Object: (solverC_sub_) 1 MPI processes 10: type: icc 10: 0 levels of fill 10: tolerance for zero pivot 2.22045e-14 10: using Manteuffel shift [POSITIVE_DEFINITE] 10: matrix ordering: natural 10: factor fill ratio given 1., needed 1. 10: Factored matrix follows: 10: Mat Object: 1 MPI processes 10: type: seqsbaij 10: rows=2, cols=2 10: package used to perform factorization: petsc 10: total: nonzeros=3, allocated nonzeros=3 10: total number of mallocs used during MatSetValues calls =0 10: block size is 1 10: linear system matrix = precond matrix: 10: Mat Object: 1 MPI processes 10: type: seqsbaij 10: rows=2, cols=2 10: total: nonzeros=3, allocated nonzeros=3 10: total number of mallocs used during MatSetValues calls =0 10: block size is 1 10: linear system matrix = precond matrix: 10: Mat Object: C 4 MPI processes 10: type: mpisbaij 10: rows=8, cols=8 10: total: nonzeros=36, allocated nonzeros=36 10: total number of mallocs used during MatSetValues calls =0 10: block size is 1 10: (1) 20:57:22 [mapping::PetRadialBasisFctMapping]:756 in map: ERROR: RBF linear system has not converged. Try to fix axis-aligned mapping setups by marking perpendicular axis as dead. 10: (2) 20:57:22 [mapping::PetRadialBasisFctMapping]:756 in map: ERROR: RBF linear system has not converged. Try to fix axis-aligned mapping setups by marking perpendicular axis as dead. 10: (3) 20:57:22 [mapping::PetRadialBasisFctMapping]:756 in map: ERROR: RBF linear system has not converged. Try to fix axis-aligned mapping setups by marking perpendicular axis as dead. 10: (0) 20:57:22 [mapping::PetRadialBasisFctMapping]:756 in map: ERROR: RBF linear system has not converged. Try to fix axis-aligned mapping setups by marking perpendicular axis as dead. 10: ------------------------------------------------------- 10: Primary job terminated normally, but 1 process returned 10: a non-zero exit code.. Per user-direction, the job has been aborted. 10: ------------------------------------------------------- 10: -------------------------------------------------------------------------- 10: mpiexec detected that one or more processes exited with non-zero status, thus causing 10: the job to be terminated. The first process to do so was: 10: 10: Process name: [[34320,1],0] 10: Exit code: 255 10: -------------------------------------------------------------------------- 8/18 Test #10: precice.mapping.petrbf ...........***Failed 1.37 sec test 11 Start 11: precice.math 11: Test command: /usr/bin/mpiexec "-n" "4" "/home/prasad/precice-2.0.2/build/testprecice" "--run_test=MathTests" 11: Environment variables: 11: PRECICE_ROOT=/home/prasad/precice-2.0.2 11: Test timeout computed to be: 20 11: Test setup error: no test cases matching filter or all test cases were disabled 11: Running 14 test cases... 11: Test setup error: no test cases matching filter or all test cases were disabled 11: Test setup error: no test cases matching filter or all test cases were disabled 11: 11: *** No errors detected 11: 9/18 Test #11: precice.math ..................... Passed 0.27 sec test 12 Start 12: precice.mesh 12: Test command: /usr/bin/mpiexec "-n" "4" "/home/prasad/precice-2.0.2/build/testprecice" "--run_test=MeshTests" 12: Environment variables: 12: PRECICE_ROOT=/home/prasad/precice-2.0.2 12: Test timeout computed to be: 20 12: Test setup error: no test cases matching filter or all test cases were disabled 12: Test setup error: no test cases matching filter or all test cases were disabled 12: Test setup error: no test cases matching filter or all test cases were disabled 12: Running 44 test cases... 12: 12: *** No errors detected 12: 10/18 Test #12: precice.mesh ..................... Passed 0.28 sec test 13 Start 13: precice.partition 13: Test command: /usr/bin/mpiexec "-n" "4" "/home/prasad/precice-2.0.2/build/testprecice" "--run_test=PartitionTests" 13: Environment variables: 13: PRECICE_ROOT=/home/prasad/precice-2.0.2 13: Test timeout computed to be: 20 13: Running 16 test cases... 13: Running 16 test cases... 13: Running 16 test cases... 13: Running 16 test cases... 13: (2) 20:57:24 [partition::ReceivedPartition]:667 in createOwnerInformation: WARNING: 10 of 15 vertices of mesh mesh have been filtered out since they have no influence on the mapping. 13: (2) 20:57:24 [partition::ReceivedPartition]:667 in createOwnerInformation: WARNING: 5 of 10 vertices of mesh mesh have been filtered out since they have no influence on the mapping. 13: (1) 20:57:24 [partition::ReceivedPartition]:667 in createOwnerInformation: WARNING: 2 of 6 vertices of mesh SolidzMesh have been filtered out since they have no influence on the mapping. 13: (0) 20:57:24 [partition::ReceivedPartition]:667 in createOwnerInformation: WARNING: 1 of 3 vertices of mesh MyMesh have been filtered out since they have no influence on the mapping. 13: 13: *** No errors detected 13: 13: *** No errors detected 13: 13: *** No errors detected 13: 13: *** No errors detected 13: 11/18 Test #13: precice.partition ................ Passed 0.33 sec test 14 Start 14: precice.interface 14: Test command: /usr/bin/mpiexec "-n" "4" "/home/prasad/precice-2.0.2/build/testprecice" "--run_test=PreciceTests:!PreciceTests/Serial:!PreciceTests/Parallel" 14: Environment variables: 14: PRECICE_ROOT=/home/prasad/precice-2.0.2 14: Test timeout computed to be: 20 14: Running 2 test cases... 14: Running 2 test cases... 14: Running 2 test cases... 14: Running 2 test cases... 14: 14: *** No errors detected 14: 14: *** No errors detected 14: 14: *** No errors detected 14: 14: *** No errors detected 14: 12/18 Test #14: precice.interface ................ Passed 0.23 sec test 15 Start 15: precice.serial 15: Test command: /usr/bin/mpiexec "-n" "4" "/home/prasad/precice-2.0.2/build/testprecice" "--run_test=PreciceTests/Serial" 15: Environment variables: 15: PRECICE_ROOT=/home/prasad/precice-2.0.2 15: Test timeout computed to be: 20 15: Running 16 test cases... 15: Running 16 test cases... 15: Running 16 test cases... 15: Running 16 test cases... 15: 15: *** No errors detected 15: 15: *** No errors detected 15: 15: *** No errors detected 15: 15: *** No errors detected 15: 13/18 Test #15: precice.serial ................... Passed 1.97 sec test 16 Start 16: precice.parallel 16: Test command: /usr/bin/mpiexec "-n" "4" "/home/prasad/precice-2.0.2/build/testprecice" "--run_test=PreciceTests/Parallel" 16: Environment variables: 16: PRECICE_ROOT=/home/prasad/precice-2.0.2 16: Test timeout computed to be: 20 16: Running 10 test cases... 16: Running 10 test cases... 16: Running 10 test cases... 16: Running 10 test cases... 16: (2) 20:57:28 [acceleration::QRFactorization]:394 in orthogonalize: WARNING: Matrix Q is not sufficiently orthogonal. Failed to rorthogonalize new column after 4 iterations. New column will be discarded. The least-squares system is very bad conditioned and the quasi-Newton will most probably fail to converge. 16: (0) 20:57:28 [acceleration::QRFactorization]:394 in orthogonalize: WARNING: Matrix Q is not sufficiently orthogonal. Failed to rorthogonalize new column after 4 iterations. New column will be discarded. The least-squares system is very bad conditioned and the quasi-Newton will most probably fail to converge. 16: (1) 20:57:28 [acceleration::QRFactorization]:394 in orthogonalize: WARNING: Matrix Q is not sufficiently orthogonal. Failed to rorthogonalize new column after 4 iterations. New column will be discarded. The least-squares system is very bad conditioned and the quasi-Newton will most probably fail to converge. 16: (2) 20:57:28 [acceleration::QRFactorization]:394 in orthogonalize: WARNING: Matrix Q is not sufficiently orthogonal. Failed to rorthogonalize new column after 4 iterations. New column will be discarded. The least-squares system is very bad conditioned and the quasi-Newton will most probably fail to converge. 16: (0) 20:57:28 [acceleration::QRFactorization]:394 in orthogonalize: WARNING: Matrix Q is not sufficiently orthogonal. Failed to rorthogonalize new column after 4 iterations. New column will be discarded. The least-squares system is very bad conditioned and the quasi-Newton will most probably fail to converge. 16: (1) 20:57:28 [acceleration::QRFactorization]:394 in orthogonalize: WARNING: Matrix Q is not sufficiently orthogonal. Failed to rorthogonalize new column after 4 iterations. New column will be discarded. The least-squares system is very bad conditioned and the quasi-Newton will most probably fail to converge. 16: (0) 20:57:28 [acceleration::QRFactorization]:394 in orthogonalize: WARNING: Matrix Q is not sufficiently orthogonal. Failed to rorthogonalize new column after 4 iterations. New column will be discarded. The least-squares system is very bad conditioned and the quasi-Newton will most probably fail to converge. 16: (2) 20:57:28 [acceleration::QRFactorization]:394 in orthogonalize: WARNING: Matrix Q is not sufficiently orthogonal. Failed to rorthogonalize new column after 4 iterations. New column will be discarded. The least-squares system is very bad conditioned and the quasi-Newton will most probably fail to converge. 16: (1) 20:57:28 [acceleration::QRFactorization]:394 in orthogonalize: WARNING: Matrix Q is not sufficiently orthogonal. Failed to rorthogonalize new column after 4 iterations. New column will be discarded. The least-squares system is very bad conditioned and the quasi-Newton will most probably fail to converge. 16: (2) 20:57:28 [acceleration::QRFactorization]:394 in orthogonalize: WARNING: Matrix Q is not sufficiently orthogonal. Failed to rorthogonalize new column after 4 iterations. New column will be discarded. The least-squares system is very bad conditioned and the quasi-Newton will most probably fail to converge. 16: (0) 20:57:28 [acceleration::QRFactorization]:394 in orthogonalize: WARNING: Matrix Q is not sufficiently orthogonal. Failed to rorthogonalize new column after 4 iterations. New column will be discarded. The least-squares system is very bad conditioned and the quasi-Newton will most probably fail to converge. 16: (1) 20:57:28 [acceleration::QRFactorization]:394 in orthogonalize: WARNING: Matrix Q is not sufficiently orthogonal. Failed to rorthogonalize new column after 4 iterations. New column will be discarded. The least-squares system is very bad conditioned and the quasi-Newton will most probably fail to converge. 16: (0) 20:57:28 [acceleration::QRFactorization]:394 in orthogonalize: WARNING: Matrix Q is not sufficiently orthogonal. Failed to rorthogonalize new column after 4 iterations. New column will be discarded. The least-squares system is very bad conditioned and the quasi-Newton will most probably fail to converge. 16: (2) 20:57:28 [acceleration::QRFactorization]:394 in orthogonalize: WARNING: Matrix Q is not sufficiently orthogonal. Failed to rorthogonalize new column after 4 iterations. New column will be discarded. The least-squares system is very bad conditioned and the quasi-Newton will most probably fail to converge. 16: (1) 20:57:28 [acceleration::QRFactorization]:394 in orthogonalize: WARNING: Matrix Q is not sufficiently orthogonal. Failed to rorthogonalize new column after 4 iterations. New column will be discarded. The least-squares system is very bad conditioned and the quasi-Newton will most probably fail to converge. 16: (2) 20:57:28 [acceleration::QRFactorization]:394 in orthogonalize: WARNING: Matrix Q is not sufficiently orthogonal. Failed to rorthogonalize new column after 4 iterations. New column will be discarded. The least-squares system is very bad conditioned and the quasi-Newton will most probably fail to converge. 16: (0) 20:57:28 [acceleration::QRFactorization]:394 in orthogonalize: WARNING: Matrix Q is not sufficiently orthogonal. Failed to rorthogonalize new column after 4 iterations. New column will be discarded. The least-squares system is very bad conditioned and the quasi-Newton will most probably fail to converge. 16: (1) 20:57:28 [acceleration::QRFactorization]:394 in orthogonalize: WARNING: Matrix Q is not sufficiently orthogonal. Failed to rorthogonalize new column after 4 iterations. New column will be discarded. The least-squares system is very bad conditioned and the quasi-Newton will most probably fail to converge. 16: (3) 20:57:28 [impl::SolverInterfaceImpl]:54 in preConnectSlaves: WARNING: Two-level initialization is still in beta testing. Several edge cases are known to fail. Please report problems nevertheless. 16: (2) 20:57:28 [impl::SolverInterfaceImpl]:54 in preConnectSlaves: WARNING: Two-level initialization is still in beta testing. Several edge cases are known to fail. Please report problems nevertheless. 16: (1) 20:57:28 [impl::SolverInterfaceImpl]:54 in preConnectSlaves: WARNING: Two-level initialization is still in beta testing. Several edge cases are known to fail. Please report problems nevertheless. 16: (0) 20:57:28 [impl::SolverInterfaceImpl]:54 in preConnectSlaves: WARNING: Two-level initialization is still in beta testing. Several edge cases are known to fail. Please report problems nevertheless. 16: (1) 20:57:28 [impl::SolverInterfaceImpl]:54 in preConnectSlaves: WARNING: Two-level initialization is still in beta testing. Several edge cases are known to fail. Please report problems nevertheless. 16: (0) 20:57:28 [impl::SolverInterfaceImpl]:54 in preConnectSlaves: WARNING: Two-level initialization is still in beta testing. Several edge cases are known to fail. Please report problems nevertheless. 16: (2) 20:57:28 [impl::SolverInterfaceImpl]:54 in preConnectSlaves: WARNING: Two-level initialization is still in beta testing. Several edge cases are known to fail. Please report problems nevertheless. 16: (3) 20:57:28 [impl::SolverInterfaceImpl]:54 in preConnectSlaves: WARNING: Two-level initialization is still in beta testing. Several edge cases are known to fail. Please report problems nevertheless. 16: (0) 20:57:28 [partition::ReceivedPartition]:667 in createOwnerInformation: WARNING: 17 of 34 vertices of mesh Nodes have been filtered out since they have no influence on the mapping. 16: 16: *** No errors detected 16: 16: *** No errors detected 16: 16: 16: *** No errors detected 16: *** No errors detected 16: 14/18 Test #16: precice.parallel ................. Passed 2.22 sec test 17 Start 17: precice.query 17: Test command: /usr/bin/mpiexec "-n" "4" "/home/prasad/precice-2.0.2/build/testprecice" "--run_test=QueryTests" 17: Environment variables: 17: PRECICE_ROOT=/home/prasad/precice-2.0.2 17: Test timeout computed to be: 20 17: Test setup error: no test cases matching filter or all test cases were disabled 17: Test setup error: no test cases matching filter or all test cases were disabled 17: Test setup error: no test cases matching filter or all test cases were disabled 17: Running 13 test cases... 17: 17: *** No errors detected 17: 15/18 Test #17: precice.query .................... Passed 0.31 sec test 18 Start 18: precice.testing 18: Test command: /usr/bin/mpiexec "-n" "4" "/home/prasad/precice-2.0.2/build/testprecice" "--run_test=TestingTests" 18: Environment variables: 18: PRECICE_ROOT=/home/prasad/precice-2.0.2 18: Test timeout computed to be: 20 18: Running 7 test cases... 18: Running 7 test cases... 18: Running 7 test cases... 18: Running 7 test cases... 18: 18: *** No errors detected 18: 18: *** No errors detected 18: 18: *** No errors detected 18: 18: *** No errors detected 18: 16/18 Test #18: precice.testing .................. Passed 0.28 sec test 19 Start 19: precice.utils 19: Test command: /usr/bin/mpiexec "-n" "4" "/home/prasad/precice-2.0.2/build/testprecice" "--run_test=UtilsTests" 19: Environment variables: 19: PRECICE_ROOT=/home/prasad/precice-2.0.2 19: Test timeout computed to be: 20 19: Running 1 test case... 19: Running 1 test case... 19: Running 1 test case... 19: Running 19 test cases... 19: 19: *** No errors detected 19: 19: *** No errors detected 19: 19: *** No errors detected 19: 19: *** No errors detected 19: 17/18 Test #19: precice.utils .................... Passed 0.25 sec test 20 Start 20: precice.xml 20: Test command: /usr/bin/mpiexec "-n" "4" "/home/prasad/precice-2.0.2/build/testprecice" "--run_test=XML" 20: Environment variables: 20: PRECICE_ROOT=/home/prasad/precice-2.0.2 20: Test timeout computed to be: 20 20: Test setup error: no test cases matching filter or all test cases were disabled 20: Running 9 test cases... 20: Test setup error: no test cases matching filter or all test cases were disabled 20: Test setup error: no test cases matching filter or all test cases were disabled 20: 20: *** No errors detected 20: 18/18 Test #20: precice.xml ...................... Passed 0.46 sec 94% tests passed, 1 tests failed out of 18 Label Time Summary: petsc = 1.37 sec*proc (1 test) Total Test time (real) = 10.78 sec The following tests FAILED: 10 - precice.mapping.petrbf (Failed) Errors while running CTest CMakeFiles/test_base.dir/build.make:57: recipe for target 'CMakeFiles/test_base' failed make[3]: *** [CMakeFiles/test_base] Error 8 CMakeFiles/Makefile2:274: recipe for target 'CMakeFiles/test_base.dir/all' failed make[2]: *** [CMakeFiles/test_base.dir/all] Error 2 CMakeFiles/Makefile2:281: recipe for target 'CMakeFiles/test_base.dir/rule' failed make[1]: *** [CMakeFiles/test_base.dir/rule] Error 2 Makefile:275: recipe for target 'test_base' failed make: *** [test_base] Error 2 prasad@XDEM-laptop:~/precice-2.0.2/build$