************************************************************

CalculiX Version 2.16, Copyright(C) 1998-2019 Guido Dhondt
CalculiX comes with ABSOLUTELY NO WARRANTY. This is free
software, and you are welcome to redistribute it under
certain conditions, see gpl.htm

************************************************************

You are using an executable made on Mo 25. Nov 18:56:47 CET 2019

  The numbers below are estimated upper bounds

  number of:

   nodes:        61601
   elements:        34989
   one-dimensional elements:            0
   two-dimensional elements:            0
   integration points per element:           15
   degrees of freedom per node:            3
   layers per element:            1

   distributed facial loads:            0
   distributed volumetric loads:            0
   concentrated loads:        61488
   single point constraints:        27768
   multiple point constraints:            1
   terms in all multiple point constraints:            1
   tie constraints:            2
   dependent nodes tied by cyclic constraints:            0
   dependent nodes in pre-tension constraints:            0

   sets:           24
   terms in all sets:       231829

   materials:            2
   constants per material and temperature:            4
   temperature points per material:            1
   plastic data points per material:            0

   orientations:            0
   amplitudes:            2
   data points in all amplitudes:            2
   print requests:            0
   transformations:            0
   property cards:            0

 *INFO reading *SURFACE BEHAVIOR: the tension
       value at large clearances
       (only relevant for node-to-surface contact)
       must be strictly positive
       the following default will be used:   207.14285714285714     
       the user is advised to analyze the results
       carefully
 *INFO reading *STEP: nonlinear geometric
       effects are turned on


 STEP            1

 Dynamic analysis was selected

 Newton-Raphson iterative procedure is active

 Nonlinear geometric effects are taken into account

 Decascading the MPC's

 Determining the structure of the matrix:
Starting FSI analysis via preCICE using the geometrically non-linear CalculiX solver...
 Using up to 1 cpu(s) for the stress calculation.

 Using up to 1 cpu(s) for the energy calculation.

 ++CMT: Calculating Material Wave Speeds...

 Wave Speed for mat.            1   205.68833780186063     
 Wave Speed for mat.            2  -1.0000000000000000     

 ++CMT DEBUG: Courant criterion for stability time inc=1.265228e-08

 Using up to 1 cpu(s) for the symmetric stiffness/mass contributions.

Setting up preCICE participant Calculix, using config file: config.yml
[corvidpost5:36841] *** Process received signal ***
[corvidpost5:36841] Signal: Segmentation fault (11)
[corvidpost5:36841] Signal code: Address not mapped (1)
[corvidpost5:36841] Failing at address: 0x2b0184442010
[corvidpost5:36841] [ 0] /lib64/libpthread.so.0(+0xf630)[0x2b0554aa7630]
[corvidpost5:36841] [ 1] /home/shelf1/motorsports/software/Utilities/install/precice/2.2.0/lib64/libprecice.so.2(_ZN5Eigen15PlainObjectBaseINS_6MatrixIdLin1ELin1ELi0ELin1ELin1EEEE6resizeEll+0x12a)[0x2b05539449ee]
[corvidpost5:36841] [ 2] /home/shelf1/motorsports/software/Utilities/install/precice/2.2.0/lib64/libprecice.so.2(_ZN5Eigen8internal17resize_if_allowedINS_6MatrixIdLin1ELin1ELi0ELin1ELin1EEENS_14CwiseNullaryOpINS0_18scalar_constant_opIdEES3_EEddEEvRT_RKT0_RKNS0_9assign_opIT1_T2_EE+0x7f)[0x2b0553960ebe]
[corvidpost5:36841] [ 3] /home/shelf1/motorsports/software/Utilities/install/precice/2.2.0/lib64/libprecice.so.2(_ZN5Eigen8internal26call_dense_assignment_loopINS_6MatrixIdLin1ELin1ELi0ELin1ELin1EEENS_14CwiseNullaryOpINS0_18scalar_constant_opIdEES3_EENS0_9assign_opIddEEEEvRT_RKT0_RKT1_+0x3f)[0x2b0553960a5a]
[corvidpost5:36841] [ 4] /home/shelf1/motorsports/software/Utilities/install/precice/2.2.0/lib64/libprecice.so.2(_ZN5Eigen8internal10AssignmentINS_6MatrixIdLin1ELin1ELi0ELin1ELin1EEENS_14CwiseNullaryOpINS0_18scalar_constant_opIdEES3_EENS0_9assign_opIddEENS0_11Dense2DenseEvE3runERS3_RKS7_RKS9_+0x3e)[0x2b0553960309]
[corvidpost5:36841] [ 5] /home/shelf1/motorsports/software/Utilities/install/precice/2.2.0/lib64/libprecice.so.2(_ZN5Eigen8internal24call_assignment_no_aliasINS_6MatrixIdLin1ELin1ELi0ELin1ELin1EEENS_14CwiseNullaryOpINS0_18scalar_constant_opIdEES3_EENS0_9assign_opIddEEEEvRT_RKT0_RKT1_+0x33)[0x2b055395fb91]
[corvidpost5:36841] [ 6] /home/shelf1/motorsports/software/Utilities/install/precice/2.2.0/lib64/libprecice.so.2(_ZN5Eigen8internal15call_assignmentINS_6MatrixIdLin1ELin1ELi0ELin1ELin1EEENS_14CwiseNullaryOpINS0_18scalar_constant_opIdEES3_EENS0_9assign_opIddEEEEvRT_RKT0_RKT1_NS0_9enable_ifIXntsrNS0_25evaluator_assume_aliasingISC_NS0_16evaluator_traitsISC_E5ShapeEEE5valueEPvE4typeE+0x2f)[0x2b055395faf0]
[corvidpost5:36841] [ 7] /home/shelf1/motorsports/software/Utilities/install/precice/2.2.0/lib64/libprecice.so.2(_ZN5Eigen8internal15call_assignmentINS_6MatrixIdLin1ELin1ELi0ELin1ELin1EEENS_14CwiseNullaryOpINS0_18scalar_constant_opIdEES3_EEEEvRT_RKT0_+0x35)[0x2b055395f203]
[corvidpost5:36841] [ 8] /home/shelf1/motorsports/software/Utilities/install/precice/2.2.0/lib64/libprecice.so.2(_ZN5Eigen15PlainObjectBaseINS_6MatrixIdLin1ELin1ELi0ELin1ELin1EEEE4_setINS_14CwiseNullaryOpINS_8internal18scalar_constant_opIdEES2_EEEERS2_RKNS_9DenseBaseIT_EE+0x37)[0x2b055395e6ef]
[corvidpost5:36841] [ 9] /home/shelf1/motorsports/software/Utilities/install/precice/2.2.0/lib64/libprecice.so.2(_ZN5Eigen6MatrixIdLin1ELin1ELi0ELin1ELin1EEaSINS_14CwiseNullaryOpINS_8internal18scalar_constant_opIdEES1_EEEERS1_RKNS_9DenseBaseIT_EE+0x23)[0x2b055395e111]
[corvidpost5:36841] [10] /home/shelf1/motorsports/software/Utilities/install/precice/2.2.0/lib64/libprecice.so.2(_ZN7precice12acceleration16MVQNAcceleration10initializeERSt3mapIiSt10shared_ptrINS_9cplscheme12CouplingDataEESt4lessIiESaISt4pairIKiS6_EEE+0x308)[0x2b055397bdc0]
[corvidpost5:36841] [11] /home/shelf1/motorsports/software/Utilities/install/precice/2.2.0/lib64/libprecice.so.2(_ZN7precice9cplscheme18BaseCouplingScheme10initializeEdi+0x9d7)[0x2b0553ab9ad5]
[corvidpost5:36841] [12] /home/shelf1/motorsports/software/Utilities/install/precice/2.2.0/lib64/libprecice.so.2(_ZN7precice4impl19SolverInterfaceImpl10initializeEv+0xecb)[0x2b0553db5427]
[corvidpost5:36841] [13] /home/shelf1/motorsports/software/Utilities/install/precice/2.2.0/lib64/libprecice.so.2(_ZN7precice15SolverInterface10initializeEv+0x20)[0x2b0553d8e9d8]
[corvidpost5:36841] [14] /home/shelf1/motorsports/software/Utilities/install/precice/2.2.0/lib64/libprecice.so.2(precicec_initialize+0x9e)[0x2b0553e8a33b]
[corvidpost5:36841] [15] ccx_preCICE[0x5d9509]
[corvidpost5:36841] [16] ccx_preCICE[0x5c3558]
[corvidpost5:36841] [17] ccx_preCICE[0x410ae7]
[corvidpost5:36841] [18] /lib64/libc.so.6(__libc_start_main+0xf5)[0x2b0555302545]
[corvidpost5:36841] [19] ccx_preCICE[0x419085]
[corvidpost5:36841] *** End of error message ***