prasad@XDEM-laptop:~/01_PhD/3_Tutorials/3_trials/2_OF_CCX_CHT_flap$ ./runSolid 
Running the Solid participant...

************************************************************

CalculiX Version 2.15, Copyright(C) 1998-2018 Guido Dhondt
CalculiX comes with ABSOLUTELY NO WARRANTY. This is free
software, and you are welcome to redistribute it under
certain conditions, see gpl.htm

************************************************************

You are using an executable made on Sa 15. Dez 15:34:34 CET 2018

  The numbers below are estimated upper bounds

  number of:

   nodes:          126
   elements:           40
   one-dimensional elements:            0
   two-dimensional elements:            0
   integration points per element:           27
   degrees of freedom per node:            3
   layers per element:            1

   distributed facial loads:            0
   distributed volumetric loads:            0
   concentrated loads:          258
   single point constraints:          482
   multiple point constraints:            1
   terms in all multiple point constraints:            1
   tie constraints:            0
   dependent nodes tied by cyclic constraints:            0
   dependent nodes in pre-tension constraints:            0

   sets:            4
   terms in all sets:          384

   materials:            1
   constants per material and temperature:            2                                               
   temperature points per material:            1                                                      
   plastic data points per material:            0                                                     
                                                                                                      
   orientations:            0                                                                         
   amplitudes:            4                                                                           
   data points in all amplitudes:            4                                                        
   print requests:            0                                                                       
   transformations:            0                                                                      
   property cards:            0                                                                       
                                                                                                      
 *INFO reading *STEP: nonlinear geometric                                                             
       effects are turned on                                                                          


 STEP            1

 Dynamic analysis was selected

 Newton-Raphson iterative procedure is active

 Nonlinear geometric effects are taken into account

 Decascading the MPC's

 Determining the structure of the matrix:
 number of equations
 280
 number of nonzero lower triangular matrix elements
 3224

Starting CHT analysis via preCICE...
 Using up to 1 cpu(s) for the stress calculation.

 Using up to 1 cpu(s) for the heat flux calculation.

 Using up to 1 cpu(s) for the symmetric stiffness/mass contributions.

 Factoring the system of equations using the symmetric spooles solver
 Using 1 cpu for spooles.

 Using up to 1 cpu(s) for the stress calculation.

 Using up to 1 cpu(s) for the heat flux calculation.

About to enter preCICE setup in Calculix with names CalculiX and config.yml 
Setting up preCICE participant CalculiX, using config file: config.yml
---[precice]  This is preCICE version 2.1.0
---[precice]  Revision info: v2.1.0-2-g42abc38c
---[precice]  Configuring preCICE with configuration "./precice-config.xml"
---[precice]  I am participant "CalculiX"
Set ID Found 
Read data 'Temperature' found.
---[precice] ERROR:  The given Mesh ID "-1" is unknown to preCICE.
[XDEM-laptop:04607] *** Process received signal ***
[XDEM-laptop:04607] Signal: Segmentation fault (11)
[XDEM-laptop:04607] Signal code: Address not mapped (1)
[XDEM-laptop:04607] Failing at address: 0xd200000072
[XDEM-laptop:04607] [ 0] /lib/x86_64-linux-gnu/libpthread.so.0(+0x128a0)[0x7f61b14f48a0]
[XDEM-laptop:04607] [ 1] /usr/local/lib/libprecice.so.2(_ZNK5boost8signals26detail20connection_body_base23nolock_nograb_connectedEv+0xc)[0x7f61b2bf498a]
[XDEM-laptop:04607] [ 2] /usr/local/lib/libprecice.so.2(_ZNK5boost8signals26detail11signal_implIFvRN7precice4mesh4MeshEENS0_19optional_last_valueIvEEiSt4lessIiENS_8functionIS7_EENSC_IFvRKNS0_10connectionES6_EEENS0_5mutexEE31nolock_cleanup_connections_fromERNS1_23garbage_collecting_lockISJ_EEbRKSt14_List_iteratorINS_10shared_ptrINS1_15connection_bodyISt4pairINS1_15slot_meta_groupENS_8optionalIiEEENS0_4slotIS7_SD_EESJ_EEEEEj+0x11b)[0x7f61b2bfe25f]
[XDEM-laptop:04607] [ 3] /usr/local/lib/libprecice.so.2(_ZNK5boost8signals26detail11signal_implIFvRN7precice4mesh4MeshEENS0_19optional_last_valueIvEEiSt4lessIiENS_8functionIS7_EENSC_IFvRKNS0_10connectionES6_EEENS0_5mutexEE26nolock_cleanup_connectionsERNS1_23garbage_collecting_lockISJ_EEbj+0xe9)[0x7f61b2bfbdbd]
[XDEM-laptop:04607] [ 4] /usr/local/lib/libprecice.so.2(_ZN5boost8signals26detail11signal_implIFvRN7precice4mesh4MeshEENS0_19optional_last_valueIvEEiSt4lessIiENS_8functionIS7_EENSC_IFvRKNS0_10connectionES6_EEENS0_5mutexEEclES6_+0xa9)[0x7f61b2bf8d73]
[XDEM-laptop:04607] [ 5] /usr/local/lib/libprecice.so.2(_ZN5boost8signals26signalIFvRN7precice4mesh4MeshEENS0_19optional_last_valueIvEEiSt4lessIiENS_8functionIS6_EENSB_IFvRKNS0_10connectionES5_EEENS0_5mutexEEclES5_+0x32)[0x7f61b2bf5636]
[XDEM-laptop:04607] [ 6] /usr/local/lib/libprecice.so.2(_ZN7precice4mesh4MeshD1Ev+0x23)[0x7f61b2bed847]
[XDEM-laptop:04607] [ 7] /usr/local/lib/libprecice.so.2(_ZNSt15_Sp_counted_ptrIPN7precice4mesh4MeshELN9__gnu_cxx12_Lock_policyE2EE10_M_disposeEv+0x22)[0x7f61b2c38f68]
[XDEM-laptop:04607] [ 8] ccx_preCICE(_ZNSt16_Sp_counted_baseILN9__gnu_cxx12_Lock_policyE2EE10_M_releaseEv+0x42)[0x55e31a0faa46]
[XDEM-laptop:04607] [ 9] ccx_preCICE(_ZNSt14__shared_countILN9__gnu_cxx12_Lock_policyE2EED1Ev+0x27)[0x55e31a0f965d]
[XDEM-laptop:04607] [10] /usr/local/lib/libprecice.so.2(_ZNSt12__shared_ptrIN7precice4mesh4MeshELN9__gnu_cxx12_Lock_policyE2EED1Ev+0x1c)[0x7f61b28a64c4]
[XDEM-laptop:04607] [11] /usr/local/lib/libprecice.so.2(_ZNSt10shared_ptrIN7precice4mesh4MeshEED1Ev+0x18)[0x7f61b28a64e0]
[XDEM-laptop:04607] [12] /usr/local/lib/libprecice.so.2(_ZN7precice3m2n24DistributedCommunicationD1Ev+0x2e)[0x7f61b29fa0d8]
[XDEM-laptop:04607] [13] /usr/local/lib/libprecice.so.2(_ZN7precice3m2n25PointToPointCommunicationD2Ev+0x1a5)[0x7f61b2a06e6d]
[XDEM-laptop:04607] [14] /usr/local/lib/libprecice.so.2(_ZN7precice3m2n25PointToPointCommunicationD0Ev+0x18)[0x7f61b2a06ea0]
[XDEM-laptop:04607] [15] /usr/local/lib/libprecice.so.2(_ZNSt15_Sp_counted_ptrIPN7precice3m2n25PointToPointCommunicationELN9__gnu_cxx12_Lock_policyE2EE10_M_disposeEv+0x38)[0x7f61b2a04f1c]
[XDEM-laptop:04607] [16] ccx_preCICE(_ZNSt16_Sp_counted_baseILN9__gnu_cxx12_Lock_policyE2EE10_M_releaseEv+0x42)[0x55e31a0faa46]
[XDEM-laptop:04607] [17] ccx_preCICE(_ZNSt14__shared_countILN9__gnu_cxx12_Lock_policyE2EED1Ev+0x27)[0x55e31a0f965d]
[XDEM-laptop:04607] [18] /usr/local/lib/libprecice.so.2(_ZNSt12__shared_ptrIN7precice3m2n24DistributedCommunicationELN9__gnu_cxx12_Lock_policyE2EED1Ev+0x1c)[0x7f61b2a02c6c]
[XDEM-laptop:04607] [19] /usr/local/lib/libprecice.so.2(_ZNSt10shared_ptrIN7precice3m2n24DistributedCommunicationEED1Ev+0x18)[0x7f61b2a02c88]
[XDEM-laptop:04607] [20] /usr/local/lib/libprecice.so.2(_ZNSt4pairIKiSt10shared_ptrIN7precice3m2n24DistributedCommunicationEEED1Ev+0x1c)[0x7f61b2a044be]
[XDEM-laptop:04607] [21] /usr/local/lib/libprecice.so.2(_ZN9__gnu_cxx13new_allocatorISt13_Rb_tree_nodeISt4pairIKiSt10shared_ptrIN7precice3m2n24DistributedCommunicationEEEEE7destroyIS9_EEvPT_+0x1c)[0x7f61b2a044de]
[XDEM-laptop:04607] [22] /usr/local/lib/libprecice.so.2(_ZNSt16allocator_traitsISaISt13_Rb_tree_nodeISt4pairIKiSt10shared_ptrIN7precice3m2n24DistributedCommunicationEEEEEE7destroyIS8_EEvRSA_PT_+0x23)[0x7f61b2a04351]
[XDEM-laptop:04607] [23] /usr/local/lib/libprecice.so.2(_ZNSt8_Rb_treeIiSt4pairIKiSt10shared_ptrIN7precice3m2n24DistributedCommunicationEEESt10_Select1stIS7_ESt4lessIiESaIS7_EE15_M_destroy_nodeEPSt13_Rb_tree_nodeIS7_E+0x37)[0x7f61b2a03e1f]
[XDEM-laptop:04607] [24] /usr/local/lib/libprecice.so.2(_ZNSt8_Rb_treeIiSt4pairIKiSt10shared_ptrIN7precice3m2n24DistributedCommunicationEEESt10_Select1stIS7_ESt4lessIiESaIS7_EE12_M_drop_nodeEPSt13_Rb_tree_nodeIS7_E+0x23)[0x7f61b2a03649]
[XDEM-laptop:04607] [25] /usr/local/lib/libprecice.so.2(_ZNSt8_Rb_treeIiSt4pairIKiSt10shared_ptrIN7precice3m2n24DistributedCommunicationEEESt10_Select1stIS7_ESt4lessIiESaIS7_EE8_M_eraseEPSt13_Rb_tree_nodeIS7_E+0x58)[0x7f61b2a0312a]
[XDEM-laptop:04607] [26] /usr/local/lib/libprecice.so.2(_ZNSt8_Rb_treeIiSt4pairIKiSt10shared_ptrIN7precice3m2n24DistributedCommunicationEEESt10_Select1stIS7_ESt4lessIiESaIS7_EED1Ev+0x2a)[0x7f61b2a02d58]
[XDEM-laptop:04607] [27] /usr/local/lib/libprecice.so.2(_ZNSt3mapIiSt10shared_ptrIN7precice3m2n24DistributedCommunicationEESt4lessIiESaISt4pairIKiS4_EEED1Ev+0x18)[0x7f61b2a02bae]
[XDEM-laptop:04607] [28] /usr/local/lib/libprecice.so.2(_ZN7precice3m2n3M2ND1Ev+0x58)[0x7f61b29fa93a]
[XDEM-laptop:04607] [29] /usr/local/lib/libprecice.so.2(_ZN9__gnu_cxx13new_allocatorIN7precice3m2n3M2NEE7destroyIS3_EEvPT_+0x1c)[0x7f61b2a1d8a2]
[XDEM-laptop:04607] *** End of error message ***
./runSolid: line 14:  4607 Segmentation fault      (core dumped) ccx_preCICE -i Solid/flap -precice-participant CalculiX
prasad@XDEM-laptop:~/01_PhD/3_Tutorials/3_trials/2_OF_CCX_CHT_flap$ Daniela Andrade^C
prasad@XDEM-laptop:~/01_PhD/3_Tutorials/3_trials/2_OF_CCX_CHT_flap$