/*---------------------------------------------------------------------------*\ | ========= | | | \\ / F ield | OpenFOAM: The Open Source CFD Toolbox | | \\ / O peration | Version: v1912 | | \\ / A nd | Website: www.openfoam.com | | \\/ M anipulation | | \*---------------------------------------------------------------------------*/ Build : _f3950763fe-20191219 OPENFOAM=1912 Arch : "LSB;label=32;scalar=64" Exec : laplacianFoam -case Solid Date : Sep 29 2020 Time : 11:44:28 Host : ahmed-HP-Notebook PID : 6513 I/O : uncollated Case : /home/ahmed/OpenFOAM/ahmed-v1912/run/Studienarbeit/VOF_Laplace/20200817_oilJet_VOF_Laplace_v003/Solid nProcs : 1 trapFpe: Floating point exception trapping enabled (FOAM_SIGFPE). fileModificationChecking : Monitoring run-time modified files using timeStampMaster (fileModificationSkew 10) allowSystemOperations : Allowing user-supplied system call operations // * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * // Create time Create mesh for time = 0 SIMPLE: no convergence criteria found. Calculations will run for 100 steps. Reading field T Reading diffusivity DT No finite volume options present Calculating temperature distribution ---[preciceAdapter] The preciceAdapter was loaded. ---[preciceAdapter] Reading preciceDict... ---[preciceAdapter] [DEBUG] precice-config-file : precice-config.xml ---[preciceAdapter] [DEBUG] participant name : Solid ---[preciceAdapter] [DEBUG] modules requested : ---[preciceAdapter] [DEBUG] - CHT ---[preciceAdapter] [DEBUG] interfaces : ---[preciceAdapter] [DEBUG] - mesh : Solid-Mesh ---[preciceAdapter] [DEBUG] locations : faceCenters ---[preciceAdapter] [DEBUG] connectivity : 0 ---[preciceAdapter] [DEBUG] patches : ---[preciceAdapter] [DEBUG] - interface ---[preciceAdapter] [DEBUG] writeData : ---[preciceAdapter] [DEBUG] - Heat-Flux ---[preciceAdapter] [DEBUG] readData : ---[preciceAdapter] [DEBUG] - Temperature ---[preciceAdapter] [DEBUG] Configuring the CHT module... ---[preciceAdapter] [DEBUG] user-defined solver type : basic ---[preciceAdapter] [DEBUG] temperature field name : T ---[preciceAdapter] [DEBUG] conductivity name for basic solvers : k ---[preciceAdapter] [DEBUG] density name for incompressible solvers : rho ---[preciceAdapter] [DEBUG] heat capacity name for incompressible solvers : Cp ---[preciceAdapter] [DEBUG] Prandtl number name for incompressible solvers : Pr ---[preciceAdapter] [DEBUG] Turbulent thermal diffusivity field name for incompressible solvers : alphat ---[preciceAdapter] [DEBUG] Known solver type: basic ---[preciceAdapter] [DEBUG] Checking the timestep type (fixed vs adjustable)... ---[preciceAdapter] [DEBUG] Timestep type: fixed. ---[preciceAdapter] [DEBUG] Creating the preCICE solver interface... ---[preciceAdapter] [DEBUG] Number of processes: 1 ---[preciceAdapter] [DEBUG] MPI rank: 0 ---[precice]  This is preCICE version 2.1.0 ---[precice]  Revision info: no-info [Git failed/Not a repository] ---[precice]  Configuring preCICE with configuration "precice-config.xml" ---[precice]  I am participant "Solid" ---[preciceAdapter] [DEBUG] preCICE solver interface was created. ---[preciceAdapter] [DEBUG] Creating interfaces... ---[preciceAdapter] [DEBUG] Number of face centres: 8208 ---[preciceAdapter] [DEBUG] Interface created on mesh Solid-Mesh ---[preciceAdapter] [DEBUG] Adding coupling data writers... ---[preciceAdapter] [DEBUG] Constructed KappaEff_Basic. ---[preciceAdapter] [DEBUG] Name of conductivity: k ---[preciceAdapter] [DEBUG] k = 100.000000 ---[preciceAdapter] [DEBUG] Added writer: Heat Flux for basic solvers. ---[preciceAdapter] [DEBUG] Adding coupling data readers... ---[preciceAdapter] [DEBUG] Added reader: Temperature. ---[preciceAdapter] [DEBUG] Initalizing the preCICE solver interface... ---[precice]  Setting up master communication to coupling partner/s ---[precice]  Masters are connected ---[precice]  Setting up preliminary slaves communication to coupling partner/s ---[precice]  Receive global mesh Fluid-Mesh ---[precice]  Prepare partition for mesh Solid-Mesh ---[precice]  Gather mesh Solid-Mesh ---[precice]  Send global mesh Solid-Mesh ---[precice]  Setting up slaves communication to coupling partner/s ---[precice]  Slaves are connected ---[precice]  Compute read mapping from mesh "Fluid-Mesh" to mesh "Solid-Mesh". ---[precice]  Mapping distance min:0 max:2.06898e-17 avg: 1.70193e-18 var: 5.30996e-36 cnt: 8208 ---[precice]  it 1 of 1 | dt# 1 | t 0 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete no | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Initializing preCICE data... ---[precice]  initializeData is skipped since no data has to be initialized. ---[preciceAdapter] preCICE was configured and initialized ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Creating a list of checkpointed fields... ---[preciceAdapter] [DEBUG] Collecting objects of type volScalarField... ---[preciceAdapter] [DEBUG] Will be checkpointing DT ---[preciceAdapter] [DEBUG] Will be checkpointing T ---[preciceAdapter] [DEBUG] Collecting objects of type volVectorField... ---[preciceAdapter] [DEBUG] Collecting objects of type surfaceScalarField... ---[preciceAdapter] [DEBUG] Collecting objects of type surfaceVectorField... ---[preciceAdapter] [DEBUG] Collecting objects of type pointScalarField... ---[preciceAdapter] [DEBUG] Collecting objects of type pointVectorField... ---[preciceAdapter] [DEBUG] Collecting objects of type volTensorField... ---[preciceAdapter] [DEBUG] Collecting objects of type surfaceTensorField... ---[preciceAdapter] [DEBUG] Collecting objects of type pointTensorField... ---[preciceAdapter] [DEBUG] Collecting objects of type volSymmTensorField... ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000000 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000000 was stored. ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] Setting the solver's endTime to infinity to prevent early exits. Only preCICE will control the simulation's endTime. Any functionObject's end() method will be triggered by the adapter. You may disable this behavior in the adapter's configuration. Time = 1e-05 DICPBiCGStab: Solving for T, Initial residual = 1, Final residual = 7.72391e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 0.000711764, Final residual = 5.72893e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 7.54657e-07, Final residual = 7.54657e-07, No Iterations 0 ExecutionTime = 1.16 s ClockTime = 8 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1, limit = 1e-06, normalization = 27179.4, conv = false ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 2 | t 1e-05 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000010 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000010 was stored. Time = 2e-05 DICPBiCGStab: Solving for T, Initial residual = 0.29481, Final residual = 2.27703e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.41655e-08, Final residual = 3.41655e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.41655e-08, Final residual = 3.41655e-08, No Iterations 0 ExecutionTime = 1.2 s ClockTime = 9 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.70229e-16, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 3 | t 2e-05 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000020 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000020 was stored. Time = 3e-05 DICPBiCGStab: Solving for T, Initial residual = 2.53233e-05, Final residual = 1.85399e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.86322e-09, Final residual = 1.86322e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.86322e-09, Final residual = 1.86322e-09, No Iterations 0 ExecutionTime = 1.22 s ClockTime = 10 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 5.94266e-14, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 4 | t 3e-05 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000030 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000030 was stored. Time = 4e-05 DICPBiCGStab: Solving for T, Initial residual = 2.40468e-09, Final residual = 2.40468e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.40468e-09, Final residual = 2.40468e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.40468e-09, Final residual = 2.40468e-09, No Iterations 0 ExecutionTime = 1.24 s ClockTime = 11 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 6.40438e-14, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 5 | t 4e-05 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000040 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000040 was stored. Time = 5e-05 DICPBiCGStab: Solving for T, Initial residual = 2.54804e-09, Final residual = 2.54804e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.54804e-09, Final residual = 2.54804e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.54804e-09, Final residual = 2.54804e-09, No Iterations 0 ExecutionTime = 1.26 s ClockTime = 11 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.43422e-13, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 6 | t 5e-05 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000050 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000050 was stored. Time = 6e-05 DICPBiCGStab: Solving for T, Initial residual = 4.39476e-09, Final residual = 4.39476e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 4.39476e-09, Final residual = 4.39476e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 4.39476e-09, Final residual = 4.39476e-09, No Iterations 0 ExecutionTime = 1.27 s ClockTime = 12 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.39738e-12, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 7 | t 6e-05 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000060 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000060 was stored. Time = 7e-05 DICPBiCGStab: Solving for T, Initial residual = 2.50445e-08, Final residual = 2.50445e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.50445e-08, Final residual = 2.50445e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.50445e-08, Final residual = 2.50445e-08, No Iterations 0 ExecutionTime = 1.29 s ClockTime = 13 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.47289e-11, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 8 | t 7e-05 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000070 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000070 was stored. Time = 8e-05 DICPBiCGStab: Solving for T, Initial residual = 1.13447e-07, Final residual = 1.13447e-07, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.13447e-07, Final residual = 1.13447e-07, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.13447e-07, Final residual = 1.13447e-07, No Iterations 0 ExecutionTime = 1.31 s ClockTime = 13 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 7.44868e-11, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 9 | t 8e-05 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000080 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000080 was stored. Time = 9e-05 DICPBiCGStab: Solving for T, Initial residual = 4.15497e-07, Final residual = 4.15497e-07, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 4.15497e-07, Final residual = 4.15497e-07, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 4.15497e-07, Final residual = 4.15497e-07, No Iterations 0 ExecutionTime = 1.33 s ClockTime = 14 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.23959e-10, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 10 | t 9e-05 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000090 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000090 was stored. Time = 0.0001 DICPBiCGStab: Solving for T, Initial residual = 1.49939e-06, Final residual = 1.09419e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.10646e-10, Final residual = 1.10646e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.10646e-10, Final residual = 1.10646e-10, No Iterations 0 ExecutionTime = 1.35 s ClockTime = 15 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 7.94005e-10, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 11 | t 0.0001 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000100 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000100 was stored. Time = 0.00011 DICPBiCGStab: Solving for T, Initial residual = 3.15113e-06, Final residual = 2.28654e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.29973e-10, Final residual = 2.29973e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.29973e-10, Final residual = 2.29973e-10, No Iterations 0 ExecutionTime = 1.37 s ClockTime = 15 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.10837e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 12 | t 0.00011 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000110 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000110 was stored. Time = 0.00012 DICPBiCGStab: Solving for T, Initial residual = 7.44597e-06, Final residual = 5.39844e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 5.41605e-10, Final residual = 5.41605e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 5.41605e-10, Final residual = 5.41605e-10, No Iterations 0 ExecutionTime = 1.38 s ClockTime = 16 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 4.77085e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 13 | t 0.00012 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000120 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000120 was stored. Time = 0.00013 DICPBiCGStab: Solving for T, Initial residual = 1.54806e-05, Final residual = 1.11467e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.1222e-09, Final residual = 1.1222e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.1222e-09, Final residual = 1.1222e-09, No Iterations 0 ExecutionTime = 1.4 s ClockTime = 17 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 8.91334e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 14 | t 0.00013 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000130 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000130 was stored. Time = 0.00014 DICPBiCGStab: Solving for T, Initial residual = 2.40215e-05, Final residual = 1.74641e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.79681e-09, Final residual = 1.79681e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.79681e-09, Final residual = 1.79681e-09, No Iterations 0 ExecutionTime = 1.42 s ClockTime = 18 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.29859e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 15 | t 0.00014 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000140 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000140 was stored. Time = 0.00015 DICPBiCGStab: Solving for T, Initial residual = 3.40482e-05, Final residual = 2.47725e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.70971e-09, Final residual = 2.70971e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.70971e-09, Final residual = 2.70971e-09, No Iterations 0 ExecutionTime = 1.44 s ClockTime = 18 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.69959e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 16 | t 0.00015 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000150 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000150 was stored. Time = 0.00016 DICPBiCGStab: Solving for T, Initial residual = 4.91021e-05, Final residual = 3.56673e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.89975e-09, Final residual = 3.89975e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.89975e-09, Final residual = 3.89975e-09, No Iterations 0 ExecutionTime = 1.46 s ClockTime = 19 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.29056e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 17 | t 0.00016 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000160 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000160 was stored. Time = 0.00017 DICPBiCGStab: Solving for T, Initial residual = 6.18053e-05, Final residual = 4.54168e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 5.48531e-09, Final residual = 5.48531e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 5.48531e-09, Final residual = 5.48531e-09, No Iterations 0 ExecutionTime = 1.47 s ClockTime = 20 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.80326e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 18 | t 0.00017 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000170 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000170 was stored. Time = 0.00018 DICPBiCGStab: Solving for T, Initial residual = 7.255e-05, Final residual = 5.35886e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 6.70141e-09, Final residual = 6.70141e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 6.70141e-09, Final residual = 6.70141e-09, No Iterations 0 ExecutionTime = 1.49 s ClockTime = 21 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.00814e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 19 | t 0.00018 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000180 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000180 was stored. Time = 0.00019 DICPBiCGStab: Solving for T, Initial residual = 7.86261e-05, Final residual = 5.80568e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 7.02746e-09, Final residual = 7.02746e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 7.02746e-09, Final residual = 7.02746e-09, No Iterations 0 ExecutionTime = 1.51 s ClockTime = 21 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.89452e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 20 | t 0.00019 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000190 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000190 was stored. Time = 0.0002 DICPBiCGStab: Solving for T, Initial residual = 8.24116e-05, Final residual = 6.23337e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.05394e-08, Final residual = 1.05394e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.05394e-08, Final residual = 1.05394e-08, No Iterations 0 ExecutionTime = 1.52 s ClockTime = 22 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.98839e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 21 | t 0.0002 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000200 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000200 was stored. Time = 0.00021 DICPBiCGStab: Solving for T, Initial residual = 7.74215e-05, Final residual = 6.66467e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.32786e-08, Final residual = 1.32786e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.32786e-08, Final residual = 1.32786e-08, No Iterations 0 ExecutionTime = 1.54 s ClockTime = 23 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.02577e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 22 | t 0.00021 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000210 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000210 was stored. Time = 0.00022 DICPBiCGStab: Solving for T, Initial residual = 6.40749e-05, Final residual = 7.64368e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.14721e-08, Final residual = 2.14721e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.14721e-08, Final residual = 2.14721e-08, No Iterations 0 ExecutionTime = 1.56 s ClockTime = 24 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 4.67437e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 23 | t 0.00022 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000220 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000220 was stored. Time = 0.00023 DICPBiCGStab: Solving for T, Initial residual = 5.01291e-05, Final residual = 5.83296e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.43815e-08, Final residual = 3.43815e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.43815e-08, Final residual = 3.43815e-08, No Iterations 0 ExecutionTime = 1.57 s ClockTime = 24 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 9.13822e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 24 | t 0.00023 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000230 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000230 was stored. Time = 0.00024 DICPBiCGStab: Solving for T, Initial residual = 3.30063e-05, Final residual = 3.13743e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 4.30486e-08, Final residual = 4.30486e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 4.30486e-08, Final residual = 4.30486e-08, No Iterations 0 ExecutionTime = 1.59 s ClockTime = 25 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.23586e-07, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 25 | t 0.00024 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000240 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000240 was stored. Time = 0.00025 DICPBiCGStab: Solving for T, Initial residual = 2.92625e-05, Final residual = 2.01765e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 5.62833e-08, Final residual = 5.62833e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 5.62833e-08, Final residual = 5.62833e-08, No Iterations 0 ExecutionTime = 1.6 s ClockTime = 26 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.71684e-07, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 26 | t 0.00025 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000250 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000250 was stored. Time = 0.00026 DICPBiCGStab: Solving for T, Initial residual = 3.92477e-05, Final residual = 3.01774e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 6.67329e-08, Final residual = 6.67329e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 6.67329e-08, Final residual = 6.67329e-08, No Iterations 0 ExecutionTime = 1.62 s ClockTime = 26 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.0415e-07, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 27 | t 0.00026 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000260 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000260 was stored. Time = 0.00027 DICPBiCGStab: Solving for T, Initial residual = 5.05587e-05, Final residual = 4.40837e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 7.25708e-08, Final residual = 7.25708e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 7.25708e-08, Final residual = 7.25708e-08, No Iterations 0 ExecutionTime = 1.63 s ClockTime = 27 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.20676e-07, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 28 | t 0.00027 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000270 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000270 was stored. Time = 0.00028 DICPBiCGStab: Solving for T, Initial residual = 6.23605e-05, Final residual = 5.70468e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 8.12118e-08, Final residual = 8.12118e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 8.12118e-08, Final residual = 8.12118e-08, No Iterations 0 ExecutionTime = 1.66 s ClockTime = 28 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.39821e-07, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 29 | t 0.00028 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000280 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000280 was stored. Time = 0.00029 DICPBiCGStab: Solving for T, Initial residual = 6.74174e-05, Final residual = 6.42444e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 8.30657e-08, Final residual = 8.30657e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 8.30657e-08, Final residual = 8.30657e-08, No Iterations 0 ExecutionTime = 1.67 s ClockTime = 28 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.44909e-07, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 30 | t 0.00029 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000290 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000290 was stored. Time = 0.0003 DICPBiCGStab: Solving for T, Initial residual = 6.80531e-05, Final residual = 6.60643e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 7.98212e-08, Final residual = 7.98212e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 7.98212e-08, Final residual = 7.98212e-08, No Iterations 0 ExecutionTime = 1.69 s ClockTime = 29 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.38407e-07, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 31 | t 0.0003 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000300 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000300 was stored. Time = 0.00031 DICPBiCGStab: Solving for T, Initial residual = 6.51607e-05, Final residual = 6.30829e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 7.63942e-08, Final residual = 7.63942e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 7.63942e-08, Final residual = 7.63942e-08, No Iterations 0 ExecutionTime = 1.7 s ClockTime = 30 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.30354e-07, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 32 | t 0.00031 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000310 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000310 was stored. Time = 0.00032 DICPBiCGStab: Solving for T, Initial residual = 6.13845e-05, Final residual = 5.85598e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 7.33013e-08, Final residual = 7.33013e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 7.33013e-08, Final residual = 7.33013e-08, No Iterations 0 ExecutionTime = 1.72 s ClockTime = 31 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.2427e-07, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 33 | t 0.00032 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000320 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000320 was stored. Time = 0.00033 DICPBiCGStab: Solving for T, Initial residual = 5.27631e-05, Final residual = 5.44089e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 4.91577e-08, Final residual = 4.91577e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 4.91577e-08, Final residual = 4.91577e-08, No Iterations 0 ExecutionTime = 1.73 s ClockTime = 31 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.54511e-07, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 34 | t 0.00033 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000330 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000330 was stored. Time = 0.00034 DICPBiCGStab: Solving for T, Initial residual = 4.82142e-05, Final residual = 5.02013e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 4.16763e-08, Final residual = 4.16763e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 4.16763e-08, Final residual = 4.16763e-08, No Iterations 0 ExecutionTime = 1.75 s ClockTime = 32 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.32258e-07, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 35 | t 0.00034 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000340 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000340 was stored. Time = 0.00035 DICPBiCGStab: Solving for T, Initial residual = 4.25049e-05, Final residual = 4.42781e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.10911e-08, Final residual = 3.10911e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.10911e-08, Final residual = 3.10911e-08, No Iterations 0 ExecutionTime = 1.77 s ClockTime = 33 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.05864e-07, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 36 | t 0.00035 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000350 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000350 was stored. Time = 0.00036 DICPBiCGStab: Solving for T, Initial residual = 3.28227e-05, Final residual = 2.51257e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 8.46335e-09, Final residual = 8.46335e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 8.46335e-09, Final residual = 8.46335e-09, No Iterations 0 ExecutionTime = 1.79 s ClockTime = 34 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.31613e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 37 | t 0.00036 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000360 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000360 was stored. Time = 0.00037 DICPBiCGStab: Solving for T, Initial residual = 2.80079e-05, Final residual = 2.15419e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 7.93635e-09, Final residual = 7.93635e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 7.93635e-09, Final residual = 7.93635e-09, No Iterations 0 ExecutionTime = 1.81 s ClockTime = 34 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.85134e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 38 | t 0.00037 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000370 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000370 was stored. Time = 0.00038 DICPBiCGStab: Solving for T, Initial residual = 2.38341e-05, Final residual = 1.84685e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.05691e-08, Final residual = 1.05691e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.05691e-08, Final residual = 1.05691e-08, No Iterations 0 ExecutionTime = 1.82 s ClockTime = 35 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.5799e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 39 | t 0.00038 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000380 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000380 was stored. Time = 0.00039 DICPBiCGStab: Solving for T, Initial residual = 2.12622e-05, Final residual = 1.76306e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.33013e-08, Final residual = 1.33013e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.33013e-08, Final residual = 1.33013e-08, No Iterations 0 ExecutionTime = 1.83 s ClockTime = 36 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.95596e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 40 | t 0.00039 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000390 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000390 was stored. Time = 0.0004 DICPBiCGStab: Solving for T, Initial residual = 1.81982e-05, Final residual = 1.55475e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.44704e-08, Final residual = 1.44704e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.44704e-08, Final residual = 1.44704e-08, No Iterations 0 ExecutionTime = 1.85 s ClockTime = 37 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.23727e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 41 | t 0.0004 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000400 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000400 was stored. Time = 0.00041 DICPBiCGStab: Solving for T, Initial residual = 1.75263e-05, Final residual = 1.55737e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.75928e-08, Final residual = 1.75928e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.75928e-08, Final residual = 1.75928e-08, No Iterations 0 ExecutionTime = 1.87 s ClockTime = 37 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.91583e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 42 | t 0.00041 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000410 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000410 was stored. Time = 0.00042 DICPBiCGStab: Solving for T, Initial residual = 1.78773e-05, Final residual = 1.65868e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.21884e-08, Final residual = 2.21884e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.21884e-08, Final residual = 2.21884e-08, No Iterations 0 ExecutionTime = 1.89 s ClockTime = 38 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 5.08201e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 43 | t 0.00042 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000420 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000420 was stored. Time = 0.00043 DICPBiCGStab: Solving for T, Initial residual = 1.85104e-05, Final residual = 1.67246e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.91128e-08, Final residual = 2.91128e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.91128e-08, Final residual = 2.91128e-08, No Iterations 0 ExecutionTime = 1.91 s ClockTime = 39 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 7.09737e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 44 | t 0.00043 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000430 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000430 was stored. Time = 0.00044 DICPBiCGStab: Solving for T, Initial residual = 1.82123e-05, Final residual = 1.51978e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.29403e-08, Final residual = 3.29403e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.29403e-08, Final residual = 3.29403e-08, No Iterations 0 ExecutionTime = 1.92 s ClockTime = 40 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 8.36121e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 45 | t 0.00044 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000440 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000440 was stored. Time = 0.00045 DICPBiCGStab: Solving for T, Initial residual = 1.71211e-05, Final residual = 1.29804e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.44835e-08, Final residual = 3.44835e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.44835e-08, Final residual = 3.44835e-08, No Iterations 0 ExecutionTime = 1.94 s ClockTime = 40 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 8.9956e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 46 | t 0.00045 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000450 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000450 was stored. Time = 0.00046 DICPBiCGStab: Solving for T, Initial residual = 1.31689e-05, Final residual = 9.15272e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.61345e-08, Final residual = 2.61345e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.61345e-08, Final residual = 2.61345e-08, No Iterations 0 ExecutionTime = 1.96 s ClockTime = 41 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 8.04797e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 47 | t 0.00046 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000460 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000460 was stored. Time = 0.00047 DICPBiCGStab: Solving for T, Initial residual = 1.17523e-05, Final residual = 7.48001e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.43943e-08, Final residual = 2.43943e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.43943e-08, Final residual = 2.43943e-08, No Iterations 0 ExecutionTime = 1.97 s ClockTime = 42 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 7.71264e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 48 | t 0.00047 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000470 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000470 was stored. Time = 0.00048 DICPBiCGStab: Solving for T, Initial residual = 1.46451e-05, Final residual = 9.28354e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.23183e-08, Final residual = 3.23183e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.23183e-08, Final residual = 3.23183e-08, No Iterations 0 ExecutionTime = 1.99 s ClockTime = 43 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 8.93464e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 49 | t 0.00048 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000480 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000480 was stored. Time = 0.00049 DICPBiCGStab: Solving for T, Initial residual = 1.85559e-05, Final residual = 1.35384e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.79007e-08, Final residual = 3.79007e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.79007e-08, Final residual = 3.79007e-08, No Iterations 0 ExecutionTime = 2.01 s ClockTime = 43 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.00029e-07, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 50 | t 0.00049 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000490 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000490 was stored. Time = 0.0005 DICPBiCGStab: Solving for T, Initial residual = 2.3575e-05, Final residual = 1.8782e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 4.48334e-08, Final residual = 4.48334e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 4.48334e-08, Final residual = 4.48334e-08, No Iterations 0 ExecutionTime = 2.03 s ClockTime = 44 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.13901e-07, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 51 | t 0.0005 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000500 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000500 was stored. Time = 0.00051 DICPBiCGStab: Solving for T, Initial residual = 2.85733e-05, Final residual = 2.39642e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 5.12137e-08, Final residual = 5.12137e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 5.12137e-08, Final residual = 5.12137e-08, No Iterations 0 ExecutionTime = 2.04 s ClockTime = 45 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.26112e-07, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 52 | t 0.00051 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000510 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000510 was stored. Time = 0.00052 DICPBiCGStab: Solving for T, Initial residual = 3.30763e-05, Final residual = 2.86915e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 5.57656e-08, Final residual = 5.57656e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 5.57656e-08, Final residual = 5.57656e-08, No Iterations 0 ExecutionTime = 2.06 s ClockTime = 46 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.34032e-07, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 53 | t 0.00052 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000520 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000520 was stored. Time = 0.00053 DICPBiCGStab: Solving for T, Initial residual = 3.66679e-05, Final residual = 3.25983e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 5.78928e-08, Final residual = 5.78928e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 5.78928e-08, Final residual = 5.78928e-08, No Iterations 0 ExecutionTime = 2.08 s ClockTime = 46 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.36679e-07, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 54 | t 0.00053 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000530 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000530 was stored. Time = 0.00054 DICPBiCGStab: Solving for T, Initial residual = 3.92716e-05, Final residual = 3.53918e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 5.89782e-08, Final residual = 5.89782e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 5.89782e-08, Final residual = 5.89782e-08, No Iterations 0 ExecutionTime = 2.1 s ClockTime = 47 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.40443e-07, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 55 | t 0.00054 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000540 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000540 was stored. Time = 0.00055 DICPBiCGStab: Solving for T, Initial residual = 3.99358e-05, Final residual = 3.66049e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 5.67473e-08, Final residual = 5.67473e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 5.67473e-08, Final residual = 5.67473e-08, No Iterations 0 ExecutionTime = 2.12 s ClockTime = 48 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.3588e-07, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 56 | t 0.00055 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000550 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000550 was stored. Time = 0.00056 DICPBiCGStab: Solving for T, Initial residual = 3.9384e-05, Final residual = 3.68639e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 5.15501e-08, Final residual = 5.15501e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 5.15501e-08, Final residual = 5.15501e-08, No Iterations 0 ExecutionTime = 2.13 s ClockTime = 49 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.25242e-07, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 57 | t 0.00056 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000560 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000560 was stored. Time = 0.00057 DICPBiCGStab: Solving for T, Initial residual = 3.96488e-05, Final residual = 3.84769e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 4.58318e-08, Final residual = 4.58318e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 4.58318e-08, Final residual = 4.58318e-08, No Iterations 0 ExecutionTime = 2.15 s ClockTime = 49 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.13304e-07, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 58 | t 0.00057 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000570 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000570 was stored. Time = 0.00058 DICPBiCGStab: Solving for T, Initial residual = 4.05477e-05, Final residual = 4.11685e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 4.0058e-08, Final residual = 4.0058e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 4.0058e-08, Final residual = 4.0058e-08, No Iterations 0 ExecutionTime = 2.17 s ClockTime = 50 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.0128e-07, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 59 | t 0.00058 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000580 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000580 was stored. Time = 0.00059 DICPBiCGStab: Solving for T, Initial residual = 4.05761e-05, Final residual = 4.23023e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.45209e-08, Final residual = 3.45209e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.45209e-08, Final residual = 3.45209e-08, No Iterations 0 ExecutionTime = 2.19 s ClockTime = 51 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 9.00536e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 60 | t 0.00059 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000590 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000590 was stored. Time = 0.0006 DICPBiCGStab: Solving for T, Initial residual = 3.81212e-05, Final residual = 4.01875e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.93959e-08, Final residual = 2.93959e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.93959e-08, Final residual = 2.93959e-08, No Iterations 0 ExecutionTime = 2.2 s ClockTime = 52 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 7.98927e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 61 | t 0.0006 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000600 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000600 was stored. Time = 0.00061 DICPBiCGStab: Solving for T, Initial residual = 3.36134e-05, Final residual = 3.546e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.44256e-08, Final residual = 2.44256e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.44256e-08, Final residual = 2.44256e-08, No Iterations 0 ExecutionTime = 2.22 s ClockTime = 53 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 7.0712e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 62 | t 0.00061 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000610 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000610 was stored. Time = 0.00062 DICPBiCGStab: Solving for T, Initial residual = 2.88479e-05, Final residual = 2.97802e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.99705e-08, Final residual = 1.99705e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.99705e-08, Final residual = 1.99705e-08, No Iterations 0 ExecutionTime = 2.24 s ClockTime = 53 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 6.2446e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 63 | t 0.00062 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000620 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000620 was stored. Time = 0.00063 DICPBiCGStab: Solving for T, Initial residual = 2.29293e-05, Final residual = 2.24554e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.60766e-08, Final residual = 1.60766e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.60766e-08, Final residual = 1.60766e-08, No Iterations 0 ExecutionTime = 2.26 s ClockTime = 54 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 5.52309e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 64 | t 0.00063 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000630 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000630 was stored. Time = 0.00064 DICPBiCGStab: Solving for T, Initial residual = 1.81394e-05, Final residual = 1.68768e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.28005e-08, Final residual = 1.28005e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.28005e-08, Final residual = 1.28005e-08, No Iterations 0 ExecutionTime = 2.28 s ClockTime = 55 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 4.84413e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 65 | t 0.00064 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000640 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000640 was stored. Time = 0.00065 DICPBiCGStab: Solving for T, Initial residual = 1.72048e-05, Final residual = 1.59602e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.06199e-08, Final residual = 1.06199e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.06199e-08, Final residual = 1.06199e-08, No Iterations 0 ExecutionTime = 2.3 s ClockTime = 56 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 4.25356e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 66 | t 0.00065 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000650 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000650 was stored. Time = 0.00066 DICPBiCGStab: Solving for T, Initial residual = 1.79307e-05, Final residual = 1.66455e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 9.07877e-09, Final residual = 9.07877e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 9.07877e-09, Final residual = 9.07877e-09, No Iterations 0 ExecutionTime = 2.32 s ClockTime = 56 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.78323e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 67 | t 0.00066 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000660 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000660 was stored. Time = 0.00067 DICPBiCGStab: Solving for T, Initial residual = 1.93869e-05, Final residual = 1.78476e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 7.87272e-09, Final residual = 7.87272e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 7.87272e-09, Final residual = 7.87272e-09, No Iterations 0 ExecutionTime = 2.33 s ClockTime = 57 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.39707e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 68 | t 0.00067 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000670 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000670 was stored. Time = 0.00068 DICPBiCGStab: Solving for T, Initial residual = 2.02154e-05, Final residual = 1.82472e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 6.86227e-09, Final residual = 6.86227e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 6.86227e-09, Final residual = 6.86227e-09, No Iterations 0 ExecutionTime = 2.35 s ClockTime = 58 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.09247e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 69 | t 0.00068 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000680 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000680 was stored. Time = 0.00069 DICPBiCGStab: Solving for T, Initial residual = 2.07163e-05, Final residual = 1.83747e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 6.17798e-09, Final residual = 6.17798e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 6.17798e-09, Final residual = 6.17798e-09, No Iterations 0 ExecutionTime = 2.37 s ClockTime = 59 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.87646e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 70 | t 0.00069 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000690 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000690 was stored. Time = 0.0007 DICPBiCGStab: Solving for T, Initial residual = 2.06172e-05, Final residual = 1.80422e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 5.76725e-09, Final residual = 5.76725e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 5.76725e-09, Final residual = 5.76725e-09, No Iterations 0 ExecutionTime = 2.39 s ClockTime = 59 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.68691e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 71 | t 0.0007 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000700 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000700 was stored. Time = 0.00071 DICPBiCGStab: Solving for T, Initial residual = 1.95388e-05, Final residual = 1.68596e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 5.32111e-09, Final residual = 5.32111e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 5.32111e-09, Final residual = 5.32111e-09, No Iterations 0 ExecutionTime = 2.4 s ClockTime = 60 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.46191e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 72 | t 0.00071 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000710 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000710 was stored. Time = 0.00072 DICPBiCGStab: Solving for T, Initial residual = 1.76712e-05, Final residual = 1.50583e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 4.7689e-09, Final residual = 4.7689e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 4.7689e-09, Final residual = 4.7689e-09, No Iterations 0 ExecutionTime = 2.43 s ClockTime = 61 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.20873e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 73 | t 0.00072 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000720 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000720 was stored. Time = 0.00073 DICPBiCGStab: Solving for T, Initial residual = 1.57727e-05, Final residual = 1.32647e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 4.40609e-09, Final residual = 4.40609e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 4.40609e-09, Final residual = 4.40609e-09, No Iterations 0 ExecutionTime = 2.45 s ClockTime = 62 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.9297e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 74 | t 0.00073 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000730 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000730 was stored. Time = 0.00074 DICPBiCGStab: Solving for T, Initial residual = 1.38826e-05, Final residual = 1.15047e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 4.05759e-09, Final residual = 4.05759e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 4.05759e-09, Final residual = 4.05759e-09, No Iterations 0 ExecutionTime = 2.46 s ClockTime = 62 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.64938e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 75 | t 0.00074 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000740 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000740 was stored. Time = 0.00075 DICPBiCGStab: Solving for T, Initial residual = 1.19923e-05, Final residual = 9.78303e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.70867e-09, Final residual = 3.70867e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.70867e-09, Final residual = 3.70867e-09, No Iterations 0 ExecutionTime = 2.48 s ClockTime = 63 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.39908e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 76 | t 0.00075 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000750 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000750 was stored. Time = 0.00076 DICPBiCGStab: Solving for T, Initial residual = 1.00384e-05, Final residual = 8.10953e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.43416e-09, Final residual = 3.43416e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.43416e-09, Final residual = 3.43416e-09, No Iterations 0 ExecutionTime = 2.5 s ClockTime = 64 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.20151e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 77 | t 0.00076 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000760 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000760 was stored. Time = 0.00077 DICPBiCGStab: Solving for T, Initial residual = 8.04441e-06, Final residual = 6.48942e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.2431e-09, Final residual = 3.2431e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.2431e-09, Final residual = 3.2431e-09, No Iterations 0 ExecutionTime = 2.52 s ClockTime = 65 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.0475e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 78 | t 0.00077 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000770 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000770 was stored. Time = 0.00078 DICPBiCGStab: Solving for T, Initial residual = 6.20073e-06, Final residual = 5.04107e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.10448e-09, Final residual = 3.10448e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.10448e-09, Final residual = 3.10448e-09, No Iterations 0 ExecutionTime = 2.54 s ClockTime = 65 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 9.29894e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 79 | t 0.00078 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000780 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000780 was stored. Time = 0.00079 DICPBiCGStab: Solving for T, Initial residual = 5.05547e-06, Final residual = 4.15395e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.01615e-09, Final residual = 3.01615e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.01615e-09, Final residual = 3.01615e-09, No Iterations 0 ExecutionTime = 2.55 s ClockTime = 66 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 8.43669e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 80 | t 0.00079 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000790 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000790 was stored. Time = 0.0008 DICPBiCGStab: Solving for T, Initial residual = 5.23183e-06, Final residual = 4.2817e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.01049e-09, Final residual = 3.01049e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.01049e-09, Final residual = 3.01049e-09, No Iterations 0 ExecutionTime = 2.57 s ClockTime = 67 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 7.90111e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 81 | t 0.0008 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000800 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000800 was stored. Time = 0.00081 DICPBiCGStab: Solving for T, Initial residual = 5.94925e-06, Final residual = 4.84855e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.03265e-09, Final residual = 3.03265e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.03265e-09, Final residual = 3.03265e-09, No Iterations 0 ExecutionTime = 2.58 s ClockTime = 68 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 7.66617e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 82 | t 0.00081 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000810 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000810 was stored. Time = 0.00082 DICPBiCGStab: Solving for T, Initial residual = 6.89151e-06, Final residual = 5.62879e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.05453e-09, Final residual = 3.05453e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.05453e-09, Final residual = 3.05453e-09, No Iterations 0 ExecutionTime = 2.6 s ClockTime = 68 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 7.64672e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 83 | t 0.00082 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000820 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000820 was stored. Time = 0.00083 DICPBiCGStab: Solving for T, Initial residual = 7.57046e-06, Final residual = 6.19183e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.0419e-09, Final residual = 3.0419e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.0419e-09, Final residual = 3.0419e-09, No Iterations 0 ExecutionTime = 2.62 s ClockTime = 69 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 7.68892e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 84 | t 0.00083 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000830 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000830 was stored. Time = 0.00084 DICPBiCGStab: Solving for T, Initial residual = 7.69695e-06, Final residual = 6.30569e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.98179e-09, Final residual = 2.98179e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.98179e-09, Final residual = 2.98179e-09, No Iterations 0 ExecutionTime = 2.64 s ClockTime = 70 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 7.66326e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 85 | t 0.00084 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000840 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000840 was stored. Time = 0.00085 DICPBiCGStab: Solving for T, Initial residual = 7.13941e-06, Final residual = 5.878e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.87113e-09, Final residual = 2.87113e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.87113e-09, Final residual = 2.87113e-09, No Iterations 0 ExecutionTime = 2.65 s ClockTime = 71 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 7.50677e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 86 | t 0.00085 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000850 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000850 was stored. Time = 0.00086 DICPBiCGStab: Solving for T, Initial residual = 5.84641e-06, Final residual = 4.88423e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.70886e-09, Final residual = 2.70886e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.70886e-09, Final residual = 2.70886e-09, No Iterations 0 ExecutionTime = 2.67 s ClockTime = 71 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 7.23555e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 87 | t 0.00086 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000860 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000860 was stored. Time = 0.00087 DICPBiCGStab: Solving for T, Initial residual = 4.04095e-06, Final residual = 3.49022e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.50825e-09, Final residual = 2.50825e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.50825e-09, Final residual = 2.50825e-09, No Iterations 0 ExecutionTime = 2.68 s ClockTime = 72 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 6.93364e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 88 | t 0.00087 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000870 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000870 was stored. Time = 0.00088 DICPBiCGStab: Solving for T, Initial residual = 2.97171e-06, Final residual = 2.63535e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.37013e-09, Final residual = 2.37013e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.37013e-09, Final residual = 2.37013e-09, No Iterations 0 ExecutionTime = 2.7 s ClockTime = 73 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 6.67612e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 89 | t 0.00088 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000880 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000880 was stored. Time = 0.00089 DICPBiCGStab: Solving for T, Initial residual = 3.73403e-06, Final residual = 3.22803e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.37993e-09, Final residual = 2.37993e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.37993e-09, Final residual = 2.37993e-09, No Iterations 0 ExecutionTime = 2.71 s ClockTime = 73 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 6.47269e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 90 | t 0.00089 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000890 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000890 was stored. Time = 0.0009 DICPBiCGStab: Solving for T, Initial residual = 4.29838e-06, Final residual = 3.6653e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.37368e-09, Final residual = 2.37368e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.37368e-09, Final residual = 2.37368e-09, No Iterations 0 ExecutionTime = 2.73 s ClockTime = 74 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 6.29666e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 91 | t 0.0009 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000900 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000900 was stored. Time = 0.00091 DICPBiCGStab: Solving for T, Initial residual = 4.44065e-06, Final residual = 3.77199e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.33328e-09, Final residual = 2.33328e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.33328e-09, Final residual = 2.33328e-09, No Iterations 0 ExecutionTime = 2.74 s ClockTime = 75 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 6.12661e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 92 | t 0.00091 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000910 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000910 was stored. Time = 0.00092 DICPBiCGStab: Solving for T, Initial residual = 4.31043e-06, Final residual = 3.67248e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.27171e-09, Final residual = 2.27171e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.27171e-09, Final residual = 2.27171e-09, No Iterations 0 ExecutionTime = 2.77 s ClockTime = 75 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 5.95763e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 93 | t 0.00092 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000920 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000920 was stored. Time = 0.00093 DICPBiCGStab: Solving for T, Initial residual = 3.95443e-06, Final residual = 3.39495e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.19176e-09, Final residual = 2.19176e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.19176e-09, Final residual = 2.19176e-09, No Iterations 0 ExecutionTime = 2.78 s ClockTime = 76 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 5.7913e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 94 | t 0.00093 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000930 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000930 was stored. Time = 0.00094 DICPBiCGStab: Solving for T, Initial residual = 3.56685e-06, Final residual = 3.09142e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.11051e-09, Final residual = 2.11051e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.11051e-09, Final residual = 2.11051e-09, No Iterations 0 ExecutionTime = 2.8 s ClockTime = 77 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 5.63396e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 95 | t 0.00094 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000940 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000940 was stored. Time = 0.00095 DICPBiCGStab: Solving for T, Initial residual = 3.23279e-06, Final residual = 2.8251e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.03463e-09, Final residual = 2.03463e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.03463e-09, Final residual = 2.03463e-09, No Iterations 0 ExecutionTime = 2.81 s ClockTime = 77 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 5.48644e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 96 | t 0.00095 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000950 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000950 was stored. Time = 0.00096 DICPBiCGStab: Solving for T, Initial residual = 2.99826e-06, Final residual = 2.62073e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.967e-09, Final residual = 1.967e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.967e-09, Final residual = 1.967e-09, No Iterations 0 ExecutionTime = 2.82 s ClockTime = 78 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 5.34889e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 97 | t 0.00096 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000960 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000960 was stored. Time = 0.00097 DICPBiCGStab: Solving for T, Initial residual = 3.04447e-06, Final residual = 2.62423e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.92279e-09, Final residual = 1.92279e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.92279e-09, Final residual = 1.92279e-09, No Iterations 0 ExecutionTime = 2.84 s ClockTime = 79 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 5.22013e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 98 | t 0.00097 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000970 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000970 was stored. Time = 0.00098 DICPBiCGStab: Solving for T, Initial residual = 3.33967e-06, Final residual = 2.84406e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.90208e-09, Final residual = 1.90208e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.90208e-09, Final residual = 1.90208e-09, No Iterations 0 ExecutionTime = 2.85 s ClockTime = 80 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 5.09949e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 99 | t 0.00098 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000980 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000980 was stored. Time = 0.00099 DICPBiCGStab: Solving for T, Initial residual = 3.52429e-06, Final residual = 2.98224e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.87404e-09, Final residual = 1.87404e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.87404e-09, Final residual = 1.87404e-09, No Iterations 0 ExecutionTime = 2.87 s ClockTime = 80 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 4.98487e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 100 | t 0.00099 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.000990 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.000990 was stored. Time = 0.001 DICPBiCGStab: Solving for T, Initial residual = 3.45205e-06, Final residual = 2.92509e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.82792e-09, Final residual = 1.82792e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.82792e-09, Final residual = 1.82792e-09, No Iterations 0 ExecutionTime = 2.98 s ClockTime = 81 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 4.86944e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 101 | t 0.001 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001000 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001000 was stored. ---[preciceAdapter] The coupling timestep completed. Writing the updated results. Time = 0.00101 DICPBiCGStab: Solving for T, Initial residual = 3.16239e-06, Final residual = 2.70298e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.76604e-09, Final residual = 1.76604e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.76604e-09, Final residual = 1.76604e-09, No Iterations 0 ExecutionTime = 3 s ClockTime = 83 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 4.74931e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 102 | t 0.00101 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001010 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001010 was stored. Time = 0.00102 DICPBiCGStab: Solving for T, Initial residual = 2.74479e-06, Final residual = 2.38197e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.69501e-09, Final residual = 1.69501e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.69501e-09, Final residual = 1.69501e-09, No Iterations 0 ExecutionTime = 3.02 s ClockTime = 83 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 4.62603e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 103 | t 0.00102 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001020 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001020 was stored. Time = 0.00103 DICPBiCGStab: Solving for T, Initial residual = 2.35322e-06, Final residual = 2.08261e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.62784e-09, Final residual = 1.62784e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.62784e-09, Final residual = 1.62784e-09, No Iterations 0 ExecutionTime = 3.03 s ClockTime = 84 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 4.50601e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 104 | t 0.00103 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001030 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001030 was stored. Time = 0.00104 DICPBiCGStab: Solving for T, Initial residual = 2.17246e-06, Final residual = 1.95312e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.57911e-09, Final residual = 1.57911e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.57911e-09, Final residual = 1.57911e-09, No Iterations 0 ExecutionTime = 3.04 s ClockTime = 85 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 4.39399e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 105 | t 0.00104 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001040 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001040 was stored. Time = 0.00105 DICPBiCGStab: Solving for T, Initial residual = 2.05809e-06, Final residual = 1.8668e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.53548e-09, Final residual = 1.53548e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.53548e-09, Final residual = 1.53548e-09, No Iterations 0 ExecutionTime = 3.06 s ClockTime = 85 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 4.29119e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 106 | t 0.00105 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001050 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001050 was stored. Time = 0.00106 DICPBiCGStab: Solving for T, Initial residual = 1.94736e-06, Final residual = 1.78126e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.49284e-09, Final residual = 1.49284e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.49284e-09, Final residual = 1.49284e-09, No Iterations 0 ExecutionTime = 3.08 s ClockTime = 86 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 4.19696e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 107 | t 0.00106 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001060 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001060 was stored. Time = 0.00107 DICPBiCGStab: Solving for T, Initial residual = 1.89711e-06, Final residual = 1.73544e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.45463e-09, Final residual = 1.45463e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.45463e-09, Final residual = 1.45463e-09, No Iterations 0 ExecutionTime = 3.09 s ClockTime = 87 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 4.10894e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 108 | t 0.00107 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001070 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001070 was stored. Time = 0.00108 DICPBiCGStab: Solving for T, Initial residual = 1.85392e-06, Final residual = 1.69465e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.41768e-09, Final residual = 1.41768e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.41768e-09, Final residual = 1.41768e-09, No Iterations 0 ExecutionTime = 3.11 s ClockTime = 87 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 4.02576e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 109 | t 0.00108 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001080 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001080 was stored. Time = 0.00109 DICPBiCGStab: Solving for T, Initial residual = 1.82876e-06, Final residual = 1.6668e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.38253e-09, Final residual = 1.38253e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.38253e-09, Final residual = 1.38253e-09, No Iterations 0 ExecutionTime = 3.12 s ClockTime = 88 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.94691e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 110 | t 0.00109 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001090 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001090 was stored. Time = 0.0011 DICPBiCGStab: Solving for T, Initial residual = 1.8988e-06, Final residual = 1.72165e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.35652e-09, Final residual = 1.35652e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.35652e-09, Final residual = 1.35652e-09, No Iterations 0 ExecutionTime = 3.14 s ClockTime = 89 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.87157e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 111 | t 0.0011 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001100 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001100 was stored. Time = 0.00111 DICPBiCGStab: Solving for T, Initial residual = 1.98824e-06, Final residual = 1.79134e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.33294e-09, Final residual = 1.33294e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.33294e-09, Final residual = 1.33294e-09, No Iterations 0 ExecutionTime = 3.15 s ClockTime = 89 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.8e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 112 | t 0.00111 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001110 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001110 was stored. Time = 0.00112 DICPBiCGStab: Solving for T, Initial residual = 2.06034e-06, Final residual = 1.84572e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.30897e-09, Final residual = 1.30897e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.30897e-09, Final residual = 1.30897e-09, No Iterations 0 ExecutionTime = 3.17 s ClockTime = 90 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.73129e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 113 | t 0.00112 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001120 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001120 was stored. Time = 0.00113 DICPBiCGStab: Solving for T, Initial residual = 2.09596e-06, Final residual = 1.8693e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.2826e-09, Final residual = 1.2826e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.2826e-09, Final residual = 1.2826e-09, No Iterations 0 ExecutionTime = 3.18 s ClockTime = 91 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.66505e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 114 | t 0.00113 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001130 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001130 was stored. Time = 0.00114 DICPBiCGStab: Solving for T, Initial residual = 2.096e-06, Final residual = 1.86136e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.25372e-09, Final residual = 1.25372e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.25372e-09, Final residual = 1.25372e-09, No Iterations 0 ExecutionTime = 3.2 s ClockTime = 91 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.6003e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 115 | t 0.00114 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001140 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001140 was stored. Time = 0.00115 DICPBiCGStab: Solving for T, Initial residual = 2.06635e-06, Final residual = 1.82874e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.22297e-09, Final residual = 1.22297e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.22297e-09, Final residual = 1.22297e-09, No Iterations 0 ExecutionTime = 3.22 s ClockTime = 92 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.53712e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 116 | t 0.00115 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001150 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001150 was stored. Time = 0.00116 DICPBiCGStab: Solving for T, Initial residual = 2.01952e-06, Final residual = 1.78213e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.19166e-09, Final residual = 1.19166e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.19166e-09, Final residual = 1.19166e-09, No Iterations 0 ExecutionTime = 3.24 s ClockTime = 93 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.47465e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 117 | t 0.00116 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001160 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001160 was stored. Time = 0.00117 DICPBiCGStab: Solving for T, Initial residual = 1.95773e-06, Final residual = 1.72463e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.16076e-09, Final residual = 1.16076e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.16076e-09, Final residual = 1.16076e-09, No Iterations 0 ExecutionTime = 3.26 s ClockTime = 94 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.41258e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 118 | t 0.00117 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001170 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001170 was stored. Time = 0.00118 DICPBiCGStab: Solving for T, Initial residual = 1.88194e-06, Final residual = 1.65746e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.12985e-09, Final residual = 1.12985e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.12985e-09, Final residual = 1.12985e-09, No Iterations 0 ExecutionTime = 3.28 s ClockTime = 94 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.35044e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 119 | t 0.00118 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001180 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001180 was stored. Time = 0.00119 DICPBiCGStab: Solving for T, Initial residual = 1.79419e-06, Final residual = 1.58282e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.09885e-09, Final residual = 1.09885e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.09885e-09, Final residual = 1.09885e-09, No Iterations 0 ExecutionTime = 3.29 s ClockTime = 95 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.28897e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 120 | t 0.00119 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001190 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001190 was stored. Time = 0.0012 DICPBiCGStab: Solving for T, Initial residual = 1.69731e-06, Final residual = 1.50235e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.06776e-09, Final residual = 1.06776e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.06776e-09, Final residual = 1.06776e-09, No Iterations 0 ExecutionTime = 3.31 s ClockTime = 96 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.22846e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 121 | t 0.0012 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001200 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001200 was stored. Time = 0.00121 DICPBiCGStab: Solving for T, Initial residual = 1.59496e-06, Final residual = 1.41893e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.03766e-09, Final residual = 1.03766e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.03766e-09, Final residual = 1.03766e-09, No Iterations 0 ExecutionTime = 3.33 s ClockTime = 97 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.16989e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 122 | t 0.00121 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001210 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001210 was stored. Time = 0.00122 DICPBiCGStab: Solving for T, Initial residual = 1.51166e-06, Final residual = 1.34776e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.00986e-09, Final residual = 1.00986e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.00986e-09, Final residual = 1.00986e-09, No Iterations 0 ExecutionTime = 3.35 s ClockTime = 97 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.11408e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 123 | t 0.00122 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001220 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001220 was stored. Time = 0.00123 DICPBiCGStab: Solving for T, Initial residual = 1.44785e-06, Final residual = 1.29152e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 9.83897e-10, Final residual = 9.83897e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 9.83897e-10, Final residual = 9.83897e-10, No Iterations 0 ExecutionTime = 3.36 s ClockTime = 98 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.06129e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 124 | t 0.00123 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001230 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001230 was stored. Time = 0.00124 DICPBiCGStab: Solving for T, Initial residual = 1.40527e-06, Final residual = 1.25095e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 9.60116e-10, Final residual = 9.60116e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 9.60116e-10, Final residual = 9.60116e-10, No Iterations 0 ExecutionTime = 3.38 s ClockTime = 99 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.01171e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 125 | t 0.00124 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001240 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001240 was stored. Time = 0.00125 DICPBiCGStab: Solving for T, Initial residual = 1.39538e-06, Final residual = 1.23543e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 9.39043e-10, Final residual = 9.39043e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 9.39043e-10, Final residual = 9.39043e-10, No Iterations 0 ExecutionTime = 3.4 s ClockTime = 99 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.96518e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 126 | t 0.00125 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001250 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001250 was stored. Time = 0.00126 DICPBiCGStab: Solving for T, Initial residual = 1.55935e-06, Final residual = 1.33479e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 9.60931e-10, Final residual = 9.60931e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 9.60931e-10, Final residual = 9.60931e-10, No Iterations 0 ExecutionTime = 3.42 s ClockTime = 100 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 4.34444e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 127 | t 0.00126 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001260 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001260 was stored. Time = 0.00127 DICPBiCGStab: Solving for T, Initial residual = 1.57753e-06, Final residual = 1.35315e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 9.47548e-10, Final residual = 9.47548e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 9.47548e-10, Final residual = 9.47548e-10, No Iterations 0 ExecutionTime = 3.44 s ClockTime = 101 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 4.26023e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 128 | t 0.00127 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001270 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001270 was stored. Time = 0.00128 DICPBiCGStab: Solving for T, Initial residual = 1.61916e-06, Final residual = 1.39241e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 9.27696e-10, Final residual = 9.27696e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 9.27696e-10, Final residual = 9.27696e-10, No Iterations 0 ExecutionTime = 3.45 s ClockTime = 102 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 4.17047e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 129 | t 0.00128 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001280 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001280 was stored. Time = 0.00129 DICPBiCGStab: Solving for T, Initial residual = 1.65933e-06, Final residual = 1.43048e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 9.08285e-10, Final residual = 9.08285e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 9.08285e-10, Final residual = 9.08285e-10, No Iterations 0 ExecutionTime = 3.47 s ClockTime = 102 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 4.08349e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 130 | t 0.00129 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001290 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001290 was stored. Time = 0.0013 DICPBiCGStab: Solving for T, Initial residual = 1.8186e-06, Final residual = 1.59349e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 9.707e-10, Final residual = 9.707e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 9.707e-10, Final residual = 9.707e-10, No Iterations 0 ExecutionTime = 3.49 s ClockTime = 103 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 4.82266e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 131 | t 0.0013 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001300 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001300 was stored. Time = 0.00131 DICPBiCGStab: Solving for T, Initial residual = 1.83856e-06, Final residual = 1.62039e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 9.71756e-10, Final residual = 9.71756e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 9.71756e-10, Final residual = 9.71756e-10, No Iterations 0 ExecutionTime = 3.5 s ClockTime = 104 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 4.74423e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 132 | t 0.00131 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001310 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001310 was stored. Time = 0.00132 DICPBiCGStab: Solving for T, Initial residual = 1.85018e-06, Final residual = 1.63365e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 9.44123e-10, Final residual = 9.44123e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 9.44123e-10, Final residual = 9.44123e-10, No Iterations 0 ExecutionTime = 3.52 s ClockTime = 104 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 4.6406e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 133 | t 0.00132 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001320 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001320 was stored. Time = 0.00133 DICPBiCGStab: Solving for T, Initial residual = 1.84856e-06, Final residual = 1.63304e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 9.15699e-10, Final residual = 9.15699e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 9.15699e-10, Final residual = 9.15699e-10, No Iterations 0 ExecutionTime = 3.54 s ClockTime = 105 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 4.539e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 134 | t 0.00133 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001330 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001330 was stored. Time = 0.00134 DICPBiCGStab: Solving for T, Initial residual = 1.83688e-06, Final residual = 1.62197e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 8.87081e-10, Final residual = 8.87081e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 8.87081e-10, Final residual = 8.87081e-10, No Iterations 0 ExecutionTime = 3.56 s ClockTime = 106 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 4.43928e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 135 | t 0.00134 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001340 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001340 was stored. Time = 0.00135 DICPBiCGStab: Solving for T, Initial residual = 1.81356e-06, Final residual = 1.59942e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 8.57916e-10, Final residual = 8.57916e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 8.57916e-10, Final residual = 8.57916e-10, No Iterations 0 ExecutionTime = 3.57 s ClockTime = 106 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 4.34136e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 136 | t 0.00135 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001350 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001350 was stored. Time = 0.00136 DICPBiCGStab: Solving for T, Initial residual = 1.77784e-06, Final residual = 1.56529e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 8.28313e-10, Final residual = 8.28313e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 8.28313e-10, Final residual = 8.28313e-10, No Iterations 0 ExecutionTime = 3.59 s ClockTime = 107 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 4.24491e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 137 | t 0.00136 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001360 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001360 was stored. Time = 0.00137 DICPBiCGStab: Solving for T, Initial residual = 1.72739e-06, Final residual = 1.51733e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 7.97881e-10, Final residual = 7.97881e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 7.97881e-10, Final residual = 7.97881e-10, No Iterations 0 ExecutionTime = 3.62 s ClockTime = 108 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 4.15011e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 138 | t 0.00137 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001370 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001370 was stored. Time = 0.00138 DICPBiCGStab: Solving for T, Initial residual = 1.66633e-06, Final residual = 1.45908e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 7.67214e-10, Final residual = 7.67214e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 7.67214e-10, Final residual = 7.67214e-10, No Iterations 0 ExecutionTime = 3.63 s ClockTime = 108 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 4.05715e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 139 | t 0.00138 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001380 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001380 was stored. Time = 0.00139 DICPBiCGStab: Solving for T, Initial residual = 1.59839e-06, Final residual = 1.39438e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 7.36907e-10, Final residual = 7.36907e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 7.36907e-10, Final residual = 7.36907e-10, No Iterations 0 ExecutionTime = 3.65 s ClockTime = 109 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.96628e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 140 | t 0.00139 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001390 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001390 was stored. Time = 0.0014 DICPBiCGStab: Solving for T, Initial residual = 1.52421e-06, Final residual = 1.32392e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 7.068e-10, Final residual = 7.068e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 7.068e-10, Final residual = 7.068e-10, No Iterations 0 ExecutionTime = 3.66 s ClockTime = 110 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.87762e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 141 | t 0.0014 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001400 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001400 was stored. Time = 0.00141 DICPBiCGStab: Solving for T, Initial residual = 1.44991e-06, Final residual = 1.25404e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 6.78167e-10, Final residual = 6.78167e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 6.78167e-10, Final residual = 6.78167e-10, No Iterations 0 ExecutionTime = 3.68 s ClockTime = 110 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.79141e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 142 | t 0.00141 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001410 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001410 was stored. Time = 0.00142 DICPBiCGStab: Solving for T, Initial residual = 1.3802e-06, Final residual = 1.18928e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 6.51066e-10, Final residual = 6.51066e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 6.51066e-10, Final residual = 6.51066e-10, No Iterations 0 ExecutionTime = 3.69 s ClockTime = 111 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.70788e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 143 | t 0.00142 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001420 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001420 was stored. Time = 0.00143 DICPBiCGStab: Solving for T, Initial residual = 1.32269e-06, Final residual = 1.13747e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 6.25767e-10, Final residual = 6.25767e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 6.25767e-10, Final residual = 6.25767e-10, No Iterations 0 ExecutionTime = 3.71 s ClockTime = 112 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.6271e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 144 | t 0.00143 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001430 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001430 was stored. Time = 0.00144 DICPBiCGStab: Solving for T, Initial residual = 1.27095e-06, Final residual = 1.09195e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 6.01708e-10, Final residual = 6.01708e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 6.01708e-10, Final residual = 6.01708e-10, No Iterations 0 ExecutionTime = 3.72 s ClockTime = 112 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.54914e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 145 | t 0.00144 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001440 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001440 was stored. Time = 0.00145 DICPBiCGStab: Solving for T, Initial residual = 1.24641e-06, Final residual = 1.06717e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 5.80371e-10, Final residual = 5.80371e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 5.80371e-10, Final residual = 5.80371e-10, No Iterations 0 ExecutionTime = 3.74 s ClockTime = 113 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.47402e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 146 | t 0.00145 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001450 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001450 was stored. Time = 0.00146 DICPBiCGStab: Solving for T, Initial residual = 1.23951e-06, Final residual = 1.06116e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 5.64689e-10, Final residual = 5.64689e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 5.64689e-10, Final residual = 5.64689e-10, No Iterations 0 ExecutionTime = 3.76 s ClockTime = 114 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.40165e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 147 | t 0.00146 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001460 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001460 was stored. Time = 0.00147 DICPBiCGStab: Solving for T, Initial residual = 1.23906e-06, Final residual = 1.06526e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 5.50659e-10, Final residual = 5.50659e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 5.50659e-10, Final residual = 5.50659e-10, No Iterations 0 ExecutionTime = 3.77 s ClockTime = 114 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.33184e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 148 | t 0.00147 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001470 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001470 was stored. Time = 0.00148 DICPBiCGStab: Solving for T, Initial residual = 1.24039e-06, Final residual = 1.07012e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 5.36886e-10, Final residual = 5.36886e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 5.36886e-10, Final residual = 5.36886e-10, No Iterations 0 ExecutionTime = 3.79 s ClockTime = 115 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.26432e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 149 | t 0.00148 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001480 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001480 was stored. Time = 0.00149 DICPBiCGStab: Solving for T, Initial residual = 1.23933e-06, Final residual = 1.0717e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 5.23247e-10, Final residual = 5.23247e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 5.23247e-10, Final residual = 5.23247e-10, No Iterations 0 ExecutionTime = 3.8 s ClockTime = 116 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.19884e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 150 | t 0.00149 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001490 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001490 was stored. Time = 0.0015 DICPBiCGStab: Solving for T, Initial residual = 1.23484e-06, Final residual = 1.06929e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 5.09508e-10, Final residual = 5.09508e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 5.09508e-10, Final residual = 5.09508e-10, No Iterations 0 ExecutionTime = 3.82 s ClockTime = 116 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.13521e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 151 | t 0.0015 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001500 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001500 was stored. Time = 0.00151 DICPBiCGStab: Solving for T, Initial residual = 1.2256e-06, Final residual = 1.06256e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 4.95756e-10, Final residual = 4.95756e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 4.95756e-10, Final residual = 4.95756e-10, No Iterations 0 ExecutionTime = 3.83 s ClockTime = 117 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.0733e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 152 | t 0.00151 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001510 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001510 was stored. Time = 0.00152 DICPBiCGStab: Solving for T, Initial residual = 1.21178e-06, Final residual = 1.0512e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 4.819e-10, Final residual = 4.819e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 4.819e-10, Final residual = 4.819e-10, No Iterations 0 ExecutionTime = 3.85 s ClockTime = 118 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.013e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 153 | t 0.00152 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001520 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001520 was stored. Time = 0.00153 DICPBiCGStab: Solving for T, Initial residual = 1.19373e-06, Final residual = 1.03594e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 4.67998e-10, Final residual = 4.67998e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 4.67998e-10, Final residual = 4.67998e-10, No Iterations 0 ExecutionTime = 3.86 s ClockTime = 118 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.95424e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 154 | t 0.00153 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001530 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001530 was stored. Time = 0.00154 DICPBiCGStab: Solving for T, Initial residual = 1.17258e-06, Final residual = 1.01738e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 4.54106e-10, Final residual = 4.54106e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 4.54106e-10, Final residual = 4.54106e-10, No Iterations 0 ExecutionTime = 3.88 s ClockTime = 119 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.897e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 155 | t 0.00154 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001540 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001540 was stored. Time = 0.00155 DICPBiCGStab: Solving for T, Initial residual = 1.14856e-06, Final residual = 9.96024e-11, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 4.42253e-10, Final residual = 4.42253e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 4.42253e-10, Final residual = 4.42253e-10, No Iterations 0 ExecutionTime = 3.89 s ClockTime = 120 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.84129e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 156 | t 0.00155 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001550 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001550 was stored. Time = 0.00156 DICPBiCGStab: Solving for T, Initial residual = 1.1247e-06, Final residual = 9.74524e-11, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 4.31593e-10, Final residual = 4.31593e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 4.31593e-10, Final residual = 4.31593e-10, No Iterations 0 ExecutionTime = 3.91 s ClockTime = 120 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.78729e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 157 | t 0.00156 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001560 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001560 was stored. Time = 0.00157 DICPBiCGStab: Solving for T, Initial residual = 1.10404e-06, Final residual = 9.53804e-11, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 4.21193e-10, Final residual = 4.21193e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 4.21193e-10, Final residual = 4.21193e-10, No Iterations 0 ExecutionTime = 3.93 s ClockTime = 121 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.73515e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 158 | t 0.00157 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001570 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001570 was stored. Time = 0.00158 DICPBiCGStab: Solving for T, Initial residual = 1.09034e-06, Final residual = 9.40235e-11, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 4.12986e-10, Final residual = 4.12986e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 4.12986e-10, Final residual = 4.12986e-10, No Iterations 0 ExecutionTime = 3.94 s ClockTime = 121 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.68503e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 159 | t 0.00158 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001580 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001580 was stored. Time = 0.00159 DICPBiCGStab: Solving for T, Initial residual = 1.08575e-06, Final residual = 9.38161e-11, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 4.06615e-10, Final residual = 4.06615e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 4.06615e-10, Final residual = 4.06615e-10, No Iterations 0 ExecutionTime = 3.96 s ClockTime = 122 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.63698e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 160 | t 0.00159 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001590 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001590 was stored. Time = 0.0016 DICPBiCGStab: Solving for T, Initial residual = 1.09526e-06, Final residual = 9.48794e-11, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 4.01646e-10, Final residual = 4.01646e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 4.01646e-10, Final residual = 4.01646e-10, No Iterations 0 ExecutionTime = 3.97 s ClockTime = 123 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.59099e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 161 | t 0.0016 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001600 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001600 was stored. Time = 0.00161 DICPBiCGStab: Solving for T, Initial residual = 1.12024e-06, Final residual = 9.66477e-11, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.97403e-10, Final residual = 3.97403e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.97403e-10, Final residual = 3.97403e-10, No Iterations 0 ExecutionTime = 3.99 s ClockTime = 123 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.54705e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 162 | t 0.00161 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001610 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001610 was stored. Time = 0.00162 DICPBiCGStab: Solving for T, Initial residual = 1.14924e-06, Final residual = 9.88646e-11, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.9431e-10, Final residual = 3.9431e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.9431e-10, Final residual = 3.9431e-10, No Iterations 0 ExecutionTime = 4 s ClockTime = 124 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.50532e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 163 | t 0.00162 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001620 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001620 was stored. Time = 0.00163 DICPBiCGStab: Solving for T, Initial residual = 1.18204e-06, Final residual = 1.01427e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.93709e-10, Final residual = 3.93709e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.93709e-10, Final residual = 3.93709e-10, No Iterations 0 ExecutionTime = 4.02 s ClockTime = 125 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.46577e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 164 | t 0.00163 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001630 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001630 was stored. Time = 0.00164 DICPBiCGStab: Solving for T, Initial residual = 1.21291e-06, Final residual = 1.03824e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.92919e-10, Final residual = 3.92919e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.92919e-10, Final residual = 3.92919e-10, No Iterations 0 ExecutionTime = 4.03 s ClockTime = 125 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.4278e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 165 | t 0.00164 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001640 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001640 was stored. Time = 0.00165 DICPBiCGStab: Solving for T, Initial residual = 1.23677e-06, Final residual = 1.05628e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.91619e-10, Final residual = 3.91619e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.91619e-10, Final residual = 3.91619e-10, No Iterations 0 ExecutionTime = 4.05 s ClockTime = 126 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.39083e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 166 | t 0.00165 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001650 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001650 was stored. Time = 0.00166 DICPBiCGStab: Solving for T, Initial residual = 1.25414e-06, Final residual = 1.06889e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.89755e-10, Final residual = 3.89755e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.89755e-10, Final residual = 3.89755e-10, No Iterations 0 ExecutionTime = 4.07 s ClockTime = 127 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.35471e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 167 | t 0.00166 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001660 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001660 was stored. Time = 0.00167 DICPBiCGStab: Solving for T, Initial residual = 1.26924e-06, Final residual = 1.07987e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.87807e-10, Final residual = 3.87807e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.87807e-10, Final residual = 3.87807e-10, No Iterations 0 ExecutionTime = 4.08 s ClockTime = 127 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.31959e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 168 | t 0.00167 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001670 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001670 was stored. Time = 0.00168 DICPBiCGStab: Solving for T, Initial residual = 1.2827e-06, Final residual = 1.08951e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.85691e-10, Final residual = 3.85691e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.85691e-10, Final residual = 3.85691e-10, No Iterations 0 ExecutionTime = 4.1 s ClockTime = 128 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.28541e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 169 | t 0.00168 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001680 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001680 was stored. Time = 0.00169 DICPBiCGStab: Solving for T, Initial residual = 1.28907e-06, Final residual = 1.0931e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.83301e-10, Final residual = 3.83301e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.83301e-10, Final residual = 3.83301e-10, No Iterations 0 ExecutionTime = 4.11 s ClockTime = 129 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.25164e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 170 | t 0.00169 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001690 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001690 was stored. Time = 0.0017 DICPBiCGStab: Solving for T, Initial residual = 1.28667e-06, Final residual = 1.08941e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.8202e-10, Final residual = 3.8202e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.8202e-10, Final residual = 3.8202e-10, No Iterations 0 ExecutionTime = 4.13 s ClockTime = 129 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.21779e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 171 | t 0.0017 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001700 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001700 was stored. Time = 0.00171 DICPBiCGStab: Solving for T, Initial residual = 1.27631e-06, Final residual = 1.07902e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.8003e-10, Final residual = 3.8003e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.8003e-10, Final residual = 3.8003e-10, No Iterations 0 ExecutionTime = 4.14 s ClockTime = 130 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.18393e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 172 | t 0.00171 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001710 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001710 was stored. Time = 0.00172 DICPBiCGStab: Solving for T, Initial residual = 1.2602e-06, Final residual = 1.06407e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.77607e-10, Final residual = 3.77607e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.77607e-10, Final residual = 3.77607e-10, No Iterations 0 ExecutionTime = 4.16 s ClockTime = 131 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.15026e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 173 | t 0.00172 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001720 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001720 was stored. Time = 0.00173 DICPBiCGStab: Solving for T, Initial residual = 1.24074e-06, Final residual = 1.04663e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.74704e-10, Final residual = 3.74704e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.74704e-10, Final residual = 3.74704e-10, No Iterations 0 ExecutionTime = 4.17 s ClockTime = 131 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.11702e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 174 | t 0.00173 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001730 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001730 was stored. Time = 0.00174 DICPBiCGStab: Solving for T, Initial residual = 1.21597e-06, Final residual = 1.02481e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.71668e-10, Final residual = 3.71668e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.71668e-10, Final residual = 3.71668e-10, No Iterations 0 ExecutionTime = 4.19 s ClockTime = 132 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.08397e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 175 | t 0.00174 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001740 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001740 was stored. Time = 0.00175 DICPBiCGStab: Solving for T, Initial residual = 1.18417e-06, Final residual = 9.97269e-11, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.69972e-10, Final residual = 3.69972e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.69972e-10, Final residual = 3.69972e-10, No Iterations 0 ExecutionTime = 4.21 s ClockTime = 133 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.05094e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 176 | t 0.00175 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001750 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001750 was stored. Time = 0.00176 DICPBiCGStab: Solving for T, Initial residual = 1.14787e-06, Final residual = 9.66203e-11, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.67883e-10, Final residual = 3.67883e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.67883e-10, Final residual = 3.67883e-10, No Iterations 0 ExecutionTime = 4.22 s ClockTime = 133 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.01825e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 177 | t 0.00176 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001760 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001760 was stored. Time = 0.00177 DICPBiCGStab: Solving for T, Initial residual = 1.11445e-06, Final residual = 9.37891e-11, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.65882e-10, Final residual = 3.65882e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.65882e-10, Final residual = 3.65882e-10, No Iterations 0 ExecutionTime = 4.24 s ClockTime = 134 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.98673e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 178 | t 0.00177 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001770 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001770 was stored. Time = 0.00178 DICPBiCGStab: Solving for T, Initial residual = 1.08605e-06, Final residual = 9.13947e-11, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.64136e-10, Final residual = 3.64136e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.64136e-10, Final residual = 3.64136e-10, No Iterations 0 ExecutionTime = 4.26 s ClockTime = 134 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.9565e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 179 | t 0.00178 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001780 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001780 was stored. Time = 0.00179 DICPBiCGStab: Solving for T, Initial residual = 1.05793e-06, Final residual = 8.90555e-11, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.62331e-10, Final residual = 3.62331e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.62331e-10, Final residual = 3.62331e-10, No Iterations 0 ExecutionTime = 4.27 s ClockTime = 135 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.92705e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 180 | t 0.00179 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001790 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001790 was stored. Time = 0.0018 DICPBiCGStab: Solving for T, Initial residual = 1.02846e-06, Final residual = 8.66493e-11, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.60291e-10, Final residual = 3.60291e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.60291e-10, Final residual = 3.60291e-10, No Iterations 0 ExecutionTime = 4.29 s ClockTime = 136 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.89828e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 181 | t 0.0018 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001800 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001800 was stored. Time = 0.00181 DICPBiCGStab: Solving for T, Initial residual = 1.00015e-06, Final residual = 8.44023e-11, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.58314e-10, Final residual = 3.58314e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.58314e-10, Final residual = 3.58314e-10, No Iterations 0 ExecutionTime = 4.3 s ClockTime = 136 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.87045e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 182 | t 0.00181 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001810 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001810 was stored. Time = 0.00182 DICPBiCGStab: Solving for T, Initial residual = 9.74235e-07, Final residual = 9.74235e-07, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 9.74235e-07, Final residual = 9.74235e-07, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 9.74235e-07, Final residual = 9.74235e-07, No Iterations 0 ExecutionTime = 4.32 s ClockTime = 137 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.84378e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 183 | t 0.00182 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001820 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001820 was stored. Time = 0.00183 DICPBiCGStab: Solving for T, Initial residual = 1.92725e-06, Final residual = 1.63136e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 7.10326e-10, Final residual = 7.10326e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 7.10326e-10, Final residual = 7.10326e-10, No Iterations 0 ExecutionTime = 4.34 s ClockTime = 138 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.81829e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 184 | t 0.00183 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001830 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001830 was stored. Time = 0.00184 DICPBiCGStab: Solving for T, Initial residual = 9.42388e-07, Final residual = 9.42388e-07, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 9.42388e-07, Final residual = 9.42388e-07, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 9.42388e-07, Final residual = 9.42388e-07, No Iterations 0 ExecutionTime = 4.35 s ClockTime = 138 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.79389e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 185 | t 0.00184 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001840 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001840 was stored. Time = 0.00185 DICPBiCGStab: Solving for T, Initial residual = 1.87633e-06, Final residual = 1.58494e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 7.05891e-10, Final residual = 7.05891e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 7.05891e-10, Final residual = 7.05891e-10, No Iterations 0 ExecutionTime = 4.37 s ClockTime = 139 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.7705e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 186 | t 0.00185 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001850 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001850 was stored. Time = 0.00186 DICPBiCGStab: Solving for T, Initial residual = 9.28853e-07, Final residual = 9.28853e-07, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 9.28853e-07, Final residual = 9.28853e-07, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 9.28853e-07, Final residual = 9.28853e-07, No Iterations 0 ExecutionTime = 4.38 s ClockTime = 140 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.74806e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 187 | t 0.00186 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001860 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001860 was stored. Time = 0.00187 DICPBiCGStab: Solving for T, Initial residual = 1.85396e-06, Final residual = 1.56335e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 7.02536e-10, Final residual = 7.02536e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 7.02536e-10, Final residual = 7.02536e-10, No Iterations 0 ExecutionTime = 4.4 s ClockTime = 140 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.72657e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 188 | t 0.00187 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001870 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001870 was stored. Time = 0.00188 DICPBiCGStab: Solving for T, Initial residual = 9.23353e-07, Final residual = 9.23353e-07, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 9.23353e-07, Final residual = 9.23353e-07, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 9.23353e-07, Final residual = 9.23353e-07, No Iterations 0 ExecutionTime = 4.41 s ClockTime = 141 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.70602e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 189 | t 0.00188 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001880 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001880 was stored. Time = 0.00189 DICPBiCGStab: Solving for T, Initial residual = 1.84879e-06, Final residual = 1.55922e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 7.00019e-10, Final residual = 7.00019e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 7.00019e-10, Final residual = 7.00019e-10, No Iterations 0 ExecutionTime = 4.43 s ClockTime = 142 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.68668e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 190 | t 0.00189 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001890 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001890 was stored. Time = 0.0019 DICPBiCGStab: Solving for T, Initial residual = 9.34899e-07, Final residual = 9.34899e-07, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 9.34899e-07, Final residual = 9.34899e-07, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 9.34899e-07, Final residual = 9.34899e-07, No Iterations 0 ExecutionTime = 4.44 s ClockTime = 142 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.66859e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 191 | t 0.0019 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001900 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001900 was stored. Time = 0.00191 DICPBiCGStab: Solving for T, Initial residual = 1.88229e-06, Final residual = 1.58402e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 6.9984e-10, Final residual = 6.9984e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 6.9984e-10, Final residual = 6.9984e-10, No Iterations 0 ExecutionTime = 4.45 s ClockTime = 143 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.6514e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 192 | t 0.00191 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001910 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001910 was stored. Time = 0.00192 DICPBiCGStab: Solving for T, Initial residual = 9.61769e-07, Final residual = 9.61769e-07, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 9.61769e-07, Final residual = 9.61769e-07, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 9.61769e-07, Final residual = 9.61769e-07, No Iterations 0 ExecutionTime = 4.47 s ClockTime = 143 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.63499e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 193 | t 0.00192 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001920 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001920 was stored. Time = 0.00193 DICPBiCGStab: Solving for T, Initial residual = 1.94661e-06, Final residual = 1.6263e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 7.00748e-10, Final residual = 7.00748e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 7.00748e-10, Final residual = 7.00748e-10, No Iterations 0 ExecutionTime = 4.48 s ClockTime = 144 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.6206e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 194 | t 0.00193 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001930 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001930 was stored. Time = 0.00194 DICPBiCGStab: Solving for T, Initial residual = 1.01811e-06, Final residual = 8.45577e-11, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.53097e-10, Final residual = 3.53097e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.53097e-10, Final residual = 3.53097e-10, No Iterations 0 ExecutionTime = 4.5 s ClockTime = 145 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.60849e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 195 | t 0.00194 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001940 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001940 was stored. Time = 0.00195 DICPBiCGStab: Solving for T, Initial residual = 1.05003e-06, Final residual = 8.69312e-11, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.54015e-10, Final residual = 3.54015e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.54015e-10, Final residual = 3.54015e-10, No Iterations 0 ExecutionTime = 4.52 s ClockTime = 145 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.59735e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 196 | t 0.00195 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001950 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001950 was stored. Time = 0.00196 DICPBiCGStab: Solving for T, Initial residual = 1.07414e-06, Final residual = 8.8714e-11, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.54797e-10, Final residual = 3.54797e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.54797e-10, Final residual = 3.54797e-10, No Iterations 0 ExecutionTime = 4.53 s ClockTime = 146 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.58591e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 197 | t 0.00196 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001960 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001960 was stored. Time = 0.00197 DICPBiCGStab: Solving for T, Initial residual = 1.09352e-06, Final residual = 9.01452e-11, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.55145e-10, Final residual = 3.55145e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.55145e-10, Final residual = 3.55145e-10, No Iterations 0 ExecutionTime = 4.55 s ClockTime = 147 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.57427e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 198 | t 0.00197 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001970 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001970 was stored. Time = 0.00198 DICPBiCGStab: Solving for T, Initial residual = 1.11236e-06, Final residual = 9.15451e-11, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.55343e-10, Final residual = 3.55343e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.55343e-10, Final residual = 3.55343e-10, No Iterations 0 ExecutionTime = 4.56 s ClockTime = 147 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.56326e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 199 | t 0.00198 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001980 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001980 was stored. Time = 0.00199 DICPBiCGStab: Solving for T, Initial residual = 1.13389e-06, Final residual = 9.31401e-11, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.5566e-10, Final residual = 3.5566e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.5566e-10, Final residual = 3.5566e-10, No Iterations 0 ExecutionTime = 4.59 s ClockTime = 148 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.5536e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 200 | t 0.00199 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.001990 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.001990 was stored. Time = 0.002 DICPBiCGStab: Solving for T, Initial residual = 1.1569e-06, Final residual = 9.48528e-11, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.56192e-10, Final residual = 3.56192e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.56192e-10, Final residual = 3.56192e-10, No Iterations 0 ExecutionTime = 4.7 s ClockTime = 149 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.54505e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 201 | t 0.002 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002000 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002000 was stored. ---[preciceAdapter] The coupling timestep completed. Writing the updated results. Time = 0.00201 DICPBiCGStab: Solving for T, Initial residual = 1.17963e-06, Final residual = 9.65223e-11, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.5653e-10, Final residual = 3.5653e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.5653e-10, Final residual = 3.5653e-10, No Iterations 0 ExecutionTime = 4.73 s ClockTime = 150 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.53708e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 202 | t 0.00201 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002010 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002010 was stored. Time = 0.00202 DICPBiCGStab: Solving for T, Initial residual = 1.19638e-06, Final residual = 9.77335e-11, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.56364e-10, Final residual = 3.56364e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.56364e-10, Final residual = 3.56364e-10, No Iterations 0 ExecutionTime = 4.74 s ClockTime = 151 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.5285e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 203 | t 0.00202 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002020 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002020 was stored. Time = 0.00203 DICPBiCGStab: Solving for T, Initial residual = 1.20564e-06, Final residual = 9.83725e-11, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.55713e-10, Final residual = 3.55713e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.55713e-10, Final residual = 3.55713e-10, No Iterations 0 ExecutionTime = 4.76 s ClockTime = 152 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.5184e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 204 | t 0.00203 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002030 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002030 was stored. Time = 0.00204 DICPBiCGStab: Solving for T, Initial residual = 1.20838e-06, Final residual = 9.85166e-11, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.54493e-10, Final residual = 3.54493e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.54493e-10, Final residual = 3.54493e-10, No Iterations 0 ExecutionTime = 4.78 s ClockTime = 152 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.50713e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 205 | t 0.00204 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002040 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002040 was stored. Time = 0.00205 DICPBiCGStab: Solving for T, Initial residual = 1.21023e-06, Final residual = 9.85812e-11, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.53185e-10, Final residual = 3.53185e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.53185e-10, Final residual = 3.53185e-10, No Iterations 0 ExecutionTime = 4.79 s ClockTime = 153 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.49618e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 206 | t 0.00205 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002050 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002050 was stored. Time = 0.00206 DICPBiCGStab: Solving for T, Initial residual = 1.21126e-06, Final residual = 9.85882e-11, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.51792e-10, Final residual = 3.51792e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.51792e-10, Final residual = 3.51792e-10, No Iterations 0 ExecutionTime = 4.81 s ClockTime = 154 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.48519e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 207 | t 0.00206 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002060 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002060 was stored. Time = 0.00207 DICPBiCGStab: Solving for T, Initial residual = 1.2062e-06, Final residual = 9.81305e-11, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.49863e-10, Final residual = 3.49863e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.49863e-10, Final residual = 3.49863e-10, No Iterations 0 ExecutionTime = 4.82 s ClockTime = 154 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.47297e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 208 | t 0.00207 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002070 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002070 was stored. Time = 0.00208 DICPBiCGStab: Solving for T, Initial residual = 1.19684e-06, Final residual = 9.73455e-11, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.47626e-10, Final residual = 3.47626e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.47626e-10, Final residual = 3.47626e-10, No Iterations 0 ExecutionTime = 4.84 s ClockTime = 155 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.45973e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 209 | t 0.00208 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002080 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002080 was stored. Time = 0.00209 DICPBiCGStab: Solving for T, Initial residual = 1.18514e-06, Final residual = 9.63543e-11, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.45113e-10, Final residual = 3.45113e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.45113e-10, Final residual = 3.45113e-10, No Iterations 0 ExecutionTime = 4.85 s ClockTime = 155 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.44615e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 210 | t 0.00209 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002090 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002090 was stored. Time = 0.0021 DICPBiCGStab: Solving for T, Initial residual = 1.17146e-06, Final residual = 9.5238e-11, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.42591e-10, Final residual = 3.42591e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.42591e-10, Final residual = 3.42591e-10, No Iterations 0 ExecutionTime = 4.87 s ClockTime = 156 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.43233e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 211 | t 0.0021 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002100 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002100 was stored. Time = 0.00211 DICPBiCGStab: Solving for T, Initial residual = 1.15667e-06, Final residual = 9.40318e-11, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.39895e-10, Final residual = 3.39895e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.39895e-10, Final residual = 3.39895e-10, No Iterations 0 ExecutionTime = 4.89 s ClockTime = 157 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.41861e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 212 | t 0.00211 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002110 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002110 was stored. Time = 0.00212 DICPBiCGStab: Solving for T, Initial residual = 1.14222e-06, Final residual = 9.28598e-11, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.37228e-10, Final residual = 3.37228e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.37228e-10, Final residual = 3.37228e-10, No Iterations 0 ExecutionTime = 4.9 s ClockTime = 157 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.40511e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 213 | t 0.00212 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002120 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002120 was stored. Time = 0.00213 DICPBiCGStab: Solving for T, Initial residual = 1.13316e-06, Final residual = 9.21048e-11, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.34938e-10, Final residual = 3.34938e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.34938e-10, Final residual = 3.34938e-10, No Iterations 0 ExecutionTime = 4.91 s ClockTime = 158 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.39333e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 214 | t 0.00213 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002130 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002130 was stored. Time = 0.00214 DICPBiCGStab: Solving for T, Initial residual = 1.12765e-06, Final residual = 9.16169e-11, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.32861e-10, Final residual = 3.32861e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.32861e-10, Final residual = 3.32861e-10, No Iterations 0 ExecutionTime = 4.93 s ClockTime = 158 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.38281e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 215 | t 0.00214 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002140 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002140 was stored. Time = 0.00215 DICPBiCGStab: Solving for T, Initial residual = 1.1206e-06, Final residual = 9.10025e-11, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.30635e-10, Final residual = 3.30635e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.30635e-10, Final residual = 3.30635e-10, No Iterations 0 ExecutionTime = 4.95 s ClockTime = 159 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.37188e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 216 | t 0.00215 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002150 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002150 was stored. Time = 0.00216 DICPBiCGStab: Solving for T, Initial residual = 1.10975e-06, Final residual = 9.01127e-11, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.28186e-10, Final residual = 3.28186e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.28186e-10, Final residual = 3.28186e-10, No Iterations 0 ExecutionTime = 4.96 s ClockTime = 160 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.36025e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 217 | t 0.00216 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002160 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002160 was stored. Time = 0.00217 DICPBiCGStab: Solving for T, Initial residual = 1.10274e-06, Final residual = 8.95238e-11, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.2596e-10, Final residual = 3.2596e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.2596e-10, Final residual = 3.2596e-10, No Iterations 0 ExecutionTime = 4.98 s ClockTime = 160 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.35011e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 218 | t 0.00217 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002170 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002170 was stored. Time = 0.00218 DICPBiCGStab: Solving for T, Initial residual = 1.10603e-06, Final residual = 8.97143e-11, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.24505e-10, Final residual = 3.24505e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.24505e-10, Final residual = 3.24505e-10, No Iterations 0 ExecutionTime = 4.99 s ClockTime = 161 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.34308e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 219 | t 0.00218 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002180 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002180 was stored. Time = 0.00219 DICPBiCGStab: Solving for T, Initial residual = 1.12172e-06, Final residual = 9.08137e-11, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.23897e-10, Final residual = 3.23897e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.23897e-10, Final residual = 3.23897e-10, No Iterations 0 ExecutionTime = 5.01 s ClockTime = 162 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.34015e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 220 | t 0.00219 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002190 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002190 was stored. Time = 0.0022 DICPBiCGStab: Solving for T, Initial residual = 1.14069e-06, Final residual = 9.21617e-11, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.23498e-10, Final residual = 3.23498e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.23498e-10, Final residual = 3.23498e-10, No Iterations 0 ExecutionTime = 5.02 s ClockTime = 162 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.3387e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 221 | t 0.0022 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002200 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002200 was stored. Time = 0.00221 DICPBiCGStab: Solving for T, Initial residual = 1.15847e-06, Final residual = 9.34351e-11, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.23084e-10, Final residual = 3.23084e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.23084e-10, Final residual = 3.23084e-10, No Iterations 0 ExecutionTime = 5.04 s ClockTime = 163 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.33717e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 222 | t 0.00221 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002210 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002210 was stored. Time = 0.00222 DICPBiCGStab: Solving for T, Initial residual = 1.1753e-06, Final residual = 9.46302e-11, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.22561e-10, Final residual = 3.22561e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.22561e-10, Final residual = 3.22561e-10, No Iterations 0 ExecutionTime = 5.06 s ClockTime = 163 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.33599e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 223 | t 0.00222 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002220 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002220 was stored. Time = 0.00223 DICPBiCGStab: Solving for T, Initial residual = 1.1896e-06, Final residual = 9.56453e-11, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.21774e-10, Final residual = 3.21774e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.21774e-10, Final residual = 3.21774e-10, No Iterations 0 ExecutionTime = 5.07 s ClockTime = 164 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.33468e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 224 | t 0.00223 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002230 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002230 was stored. Time = 0.00224 DICPBiCGStab: Solving for T, Initial residual = 1.20224e-06, Final residual = 9.65258e-11, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.21007e-10, Final residual = 3.21007e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.21007e-10, Final residual = 3.21007e-10, No Iterations 0 ExecutionTime = 5.09 s ClockTime = 165 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.33339e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 225 | t 0.00224 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002240 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002240 was stored. Time = 0.00225 DICPBiCGStab: Solving for T, Initial residual = 1.21996e-06, Final residual = 9.77658e-11, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.20443e-10, Final residual = 3.20443e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.20443e-10, Final residual = 3.20443e-10, No Iterations 0 ExecutionTime = 5.11 s ClockTime = 165 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.33444e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 226 | t 0.00225 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002250 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002250 was stored. Time = 0.00226 DICPBiCGStab: Solving for T, Initial residual = 1.24384e-06, Final residual = 9.94622e-11, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.20381e-10, Final residual = 3.20381e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.20381e-10, Final residual = 3.20381e-10, No Iterations 0 ExecutionTime = 5.12 s ClockTime = 166 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.33854e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 227 | t 0.00226 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002260 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002260 was stored. Time = 0.00227 DICPBiCGStab: Solving for T, Initial residual = 1.2702e-06, Final residual = 1.01339e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.20456e-10, Final residual = 3.20456e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.20456e-10, Final residual = 3.20456e-10, No Iterations 0 ExecutionTime = 5.14 s ClockTime = 167 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.34424e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 228 | t 0.00227 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002270 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002270 was stored. Time = 0.00228 DICPBiCGStab: Solving for T, Initial residual = 1.29525e-06, Final residual = 1.03103e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.20465e-10, Final residual = 3.20465e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.20465e-10, Final residual = 3.20465e-10, No Iterations 0 ExecutionTime = 5.15 s ClockTime = 167 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.35034e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 229 | t 0.00228 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002280 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002280 was stored. Time = 0.00229 DICPBiCGStab: Solving for T, Initial residual = 1.32092e-06, Final residual = 1.04921e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.20481e-10, Final residual = 3.20481e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.20481e-10, Final residual = 3.20481e-10, No Iterations 0 ExecutionTime = 5.17 s ClockTime = 168 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.35728e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 230 | t 0.00229 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002290 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002290 was stored. Time = 0.0023 DICPBiCGStab: Solving for T, Initial residual = 1.35351e-06, Final residual = 1.07244e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.2103e-10, Final residual = 3.2103e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.2103e-10, Final residual = 3.2103e-10, No Iterations 0 ExecutionTime = 5.18 s ClockTime = 168 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.368e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 231 | t 0.0023 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002300 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002300 was stored. Time = 0.00231 DICPBiCGStab: Solving for T, Initial residual = 1.38869e-06, Final residual = 1.09741e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.21706e-10, Final residual = 3.21706e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.21706e-10, Final residual = 3.21706e-10, No Iterations 0 ExecutionTime = 5.2 s ClockTime = 169 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.38093e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 232 | t 0.00231 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002310 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002310 was stored. Time = 0.00232 DICPBiCGStab: Solving for T, Initial residual = 1.41703e-06, Final residual = 1.11756e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.21971e-10, Final residual = 3.21971e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.21971e-10, Final residual = 3.21971e-10, No Iterations 0 ExecutionTime = 5.22 s ClockTime = 170 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.39158e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 233 | t 0.00232 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002320 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002320 was stored. Time = 0.00233 DICPBiCGStab: Solving for T, Initial residual = 1.43739e-06, Final residual = 1.13177e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.21848e-10, Final residual = 3.21848e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.21848e-10, Final residual = 3.21848e-10, No Iterations 0 ExecutionTime = 5.23 s ClockTime = 170 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.39943e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 234 | t 0.00233 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002330 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002330 was stored. Time = 0.00234 DICPBiCGStab: Solving for T, Initial residual = 1.45642e-06, Final residual = 1.14525e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.21587e-10, Final residual = 3.21587e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.21587e-10, Final residual = 3.21587e-10, No Iterations 0 ExecutionTime = 5.24 s ClockTime = 171 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.40747e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 235 | t 0.00234 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002340 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002340 was stored. Time = 0.00235 DICPBiCGStab: Solving for T, Initial residual = 1.48028e-06, Final residual = 1.16226e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.21712e-10, Final residual = 3.21712e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.21712e-10, Final residual = 3.21712e-10, No Iterations 0 ExecutionTime = 5.26 s ClockTime = 171 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.41853e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 236 | t 0.00235 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002350 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002350 was stored. Time = 0.00236 DICPBiCGStab: Solving for T, Initial residual = 1.50882e-06, Final residual = 1.18261e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.22142e-10, Final residual = 3.22142e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.22142e-10, Final residual = 3.22142e-10, No Iterations 0 ExecutionTime = 5.27 s ClockTime = 172 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.43256e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 237 | t 0.00236 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002360 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002360 was stored. Time = 0.00237 DICPBiCGStab: Solving for T, Initial residual = 1.53273e-06, Final residual = 1.19952e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.2219e-10, Final residual = 3.2219e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.2219e-10, Final residual = 3.2219e-10, No Iterations 0 ExecutionTime = 5.29 s ClockTime = 173 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.44493e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 238 | t 0.00237 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002370 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002370 was stored. Time = 0.00238 DICPBiCGStab: Solving for T, Initial residual = 1.54688e-06, Final residual = 1.20918e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.21649e-10, Final residual = 3.21649e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.21649e-10, Final residual = 3.21649e-10, No Iterations 0 ExecutionTime = 5.3 s ClockTime = 173 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.45297e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 239 | t 0.00238 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002380 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002380 was stored. Time = 0.00239 DICPBiCGStab: Solving for T, Initial residual = 1.55991e-06, Final residual = 1.218e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.20973e-10, Final residual = 3.20973e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.20973e-10, Final residual = 3.20973e-10, No Iterations 0 ExecutionTime = 5.32 s ClockTime = 174 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.46115e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 240 | t 0.00239 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002390 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002390 was stored. Time = 0.0024 DICPBiCGStab: Solving for T, Initial residual = 1.57497e-06, Final residual = 1.22825e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.20382e-10, Final residual = 3.20382e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.20382e-10, Final residual = 3.20382e-10, No Iterations 0 ExecutionTime = 5.33 s ClockTime = 174 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.47113e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 241 | t 0.0024 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002400 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002400 was stored. Time = 0.00241 DICPBiCGStab: Solving for T, Initial residual = 1.58734e-06, Final residual = 1.23666e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.19698e-10, Final residual = 3.19698e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.19698e-10, Final residual = 3.19698e-10, No Iterations 0 ExecutionTime = 5.35 s ClockTime = 175 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.4802e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 242 | t 0.00241 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002410 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002410 was stored. Time = 0.00242 DICPBiCGStab: Solving for T, Initial residual = 1.59933e-06, Final residual = 1.2447e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.18955e-10, Final residual = 3.18955e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.18955e-10, Final residual = 3.18955e-10, No Iterations 0 ExecutionTime = 5.36 s ClockTime = 176 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.48949e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 243 | t 0.00242 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002420 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002420 was stored. Time = 0.00243 DICPBiCGStab: Solving for T, Initial residual = 1.61573e-06, Final residual = 1.25586e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.18496e-10, Final residual = 3.18496e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.18496e-10, Final residual = 3.18496e-10, No Iterations 0 ExecutionTime = 5.38 s ClockTime = 176 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.50172e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 244 | t 0.00243 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002430 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002430 was stored. Time = 0.00244 DICPBiCGStab: Solving for T, Initial residual = 1.63792e-06, Final residual = 1.27099e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.18546e-10, Final residual = 3.18546e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.18546e-10, Final residual = 3.18546e-10, No Iterations 0 ExecutionTime = 5.4 s ClockTime = 177 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.51775e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 245 | t 0.00244 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002440 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002440 was stored. Time = 0.00245 DICPBiCGStab: Solving for T, Initial residual = 1.65924e-06, Final residual = 1.28542e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.18389e-10, Final residual = 3.18389e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.18389e-10, Final residual = 3.18389e-10, No Iterations 0 ExecutionTime = 5.42 s ClockTime = 177 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.53409e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 246 | t 0.00245 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002450 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002450 was stored. Time = 0.00246 DICPBiCGStab: Solving for T, Initial residual = 1.67552e-06, Final residual = 1.29639e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.17988e-10, Final residual = 3.17988e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.17988e-10, Final residual = 3.17988e-10, No Iterations 0 ExecutionTime = 5.43 s ClockTime = 178 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.54836e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 247 | t 0.00246 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002460 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002460 was stored. Time = 0.00247 DICPBiCGStab: Solving for T, Initial residual = 1.69571e-06, Final residual = 1.31021e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.17864e-10, Final residual = 3.17864e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.17864e-10, Final residual = 3.17864e-10, No Iterations 0 ExecutionTime = 5.44 s ClockTime = 179 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.56552e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 248 | t 0.00247 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002470 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002470 was stored. Time = 0.00248 DICPBiCGStab: Solving for T, Initial residual = 1.72151e-06, Final residual = 1.32798e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.18153e-10, Final residual = 3.18153e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.18153e-10, Final residual = 3.18153e-10, No Iterations 0 ExecutionTime = 5.46 s ClockTime = 179 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.58683e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 249 | t 0.00248 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002480 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002480 was stored. Time = 0.00249 DICPBiCGStab: Solving for T, Initial residual = 1.74735e-06, Final residual = 1.34606e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.18483e-10, Final residual = 3.18483e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.18483e-10, Final residual = 3.18483e-10, No Iterations 0 ExecutionTime = 5.47 s ClockTime = 180 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.60918e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 250 | t 0.00249 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002490 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002490 was stored. Time = 0.0025 DICPBiCGStab: Solving for T, Initial residual = 1.76869e-06, Final residual = 1.36096e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.18482e-10, Final residual = 3.18482e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.18482e-10, Final residual = 3.18482e-10, No Iterations 0 ExecutionTime = 5.49 s ClockTime = 180 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.62959e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 251 | t 0.0025 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002500 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002500 was stored. Time = 0.00251 DICPBiCGStab: Solving for T, Initial residual = 1.78827e-06, Final residual = 1.37435e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.1837e-10, Final residual = 3.1837e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.1837e-10, Final residual = 3.1837e-10, No Iterations 0 ExecutionTime = 5.51 s ClockTime = 181 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.64881e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 252 | t 0.00251 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002510 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002510 was stored. Time = 0.00252 DICPBiCGStab: Solving for T, Initial residual = 1.80926e-06, Final residual = 1.38879e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.18387e-10, Final residual = 3.18387e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.18387e-10, Final residual = 3.18387e-10, No Iterations 0 ExecutionTime = 5.52 s ClockTime = 181 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.67091e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 253 | t 0.00252 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002520 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002520 was stored. Time = 0.00253 DICPBiCGStab: Solving for T, Initial residual = 1.83526e-06, Final residual = 1.40676e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.18714e-10, Final residual = 3.18714e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.18714e-10, Final residual = 3.18714e-10, No Iterations 0 ExecutionTime = 5.54 s ClockTime = 182 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.69691e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 254 | t 0.00253 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002530 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002530 was stored. Time = 0.00254 DICPBiCGStab: Solving for T, Initial residual = 1.86538e-06, Final residual = 1.42783e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.1937e-10, Final residual = 3.1937e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.1937e-10, Final residual = 3.1937e-10, No Iterations 0 ExecutionTime = 5.55 s ClockTime = 183 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.72838e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 255 | t 0.00254 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002540 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002540 was stored. Time = 0.00255 DICPBiCGStab: Solving for T, Initial residual = 1.90087e-06, Final residual = 1.45278e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.20478e-10, Final residual = 3.20478e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.20478e-10, Final residual = 3.20478e-10, No Iterations 0 ExecutionTime = 5.57 s ClockTime = 183 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.76296e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 256 | t 0.00255 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002550 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002550 was stored. Time = 0.00256 DICPBiCGStab: Solving for T, Initial residual = 1.95e-06, Final residual = 1.48722e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.22428e-10, Final residual = 3.22428e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.22428e-10, Final residual = 3.22428e-10, No Iterations 0 ExecutionTime = 5.58 s ClockTime = 184 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.80275e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 257 | t 0.00256 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002560 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002560 was stored. Time = 0.00257 DICPBiCGStab: Solving for T, Initial residual = 2.00429e-06, Final residual = 1.52589e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.24852e-10, Final residual = 3.24852e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.24852e-10, Final residual = 3.24852e-10, No Iterations 0 ExecutionTime = 5.59 s ClockTime = 184 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.85015e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 258 | t 0.00257 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002570 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002570 was stored. Time = 0.00258 DICPBiCGStab: Solving for T, Initial residual = 2.06748e-06, Final residual = 1.57021e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.27835e-10, Final residual = 3.27835e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.27835e-10, Final residual = 3.27835e-10, No Iterations 0 ExecutionTime = 5.61 s ClockTime = 185 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.89238e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 259 | t 0.00258 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002580 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002580 was stored. Time = 0.00259 DICPBiCGStab: Solving for T, Initial residual = 2.13198e-06, Final residual = 1.61603e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.31046e-10, Final residual = 3.31046e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.31046e-10, Final residual = 3.31046e-10, No Iterations 0 ExecutionTime = 5.63 s ClockTime = 186 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.93041e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 260 | t 0.00259 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002590 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002590 was stored. Time = 0.0026 DICPBiCGStab: Solving for T, Initial residual = 2.20879e-06, Final residual = 1.67056e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.35095e-10, Final residual = 3.35095e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.35095e-10, Final residual = 3.35095e-10, No Iterations 0 ExecutionTime = 5.64 s ClockTime = 186 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.96526e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 261 | t 0.0026 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002600 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002600 was stored. Time = 0.00261 DICPBiCGStab: Solving for T, Initial residual = 2.3291e-06, Final residual = 1.7586e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.42441e-10, Final residual = 3.42441e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.42441e-10, Final residual = 3.42441e-10, No Iterations 0 ExecutionTime = 5.66 s ClockTime = 187 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.99702e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 262 | t 0.00261 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002610 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002610 was stored. Time = 0.00262 DICPBiCGStab: Solving for T, Initial residual = 2.50447e-06, Final residual = 1.88824e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.54043e-10, Final residual = 3.54043e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.54043e-10, Final residual = 3.54043e-10, No Iterations 0 ExecutionTime = 5.67 s ClockTime = 188 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.03419e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 263 | t 0.00262 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002620 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002620 was stored. Time = 0.00263 DICPBiCGStab: Solving for T, Initial residual = 2.65647e-06, Final residual = 2.00119e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.63892e-10, Final residual = 3.63892e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.63892e-10, Final residual = 3.63892e-10, No Iterations 0 ExecutionTime = 5.69 s ClockTime = 188 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.0872e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 264 | t 0.00263 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002630 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002630 was stored. Time = 0.00264 DICPBiCGStab: Solving for T, Initial residual = 2.75343e-06, Final residual = 2.07718e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.7016e-10, Final residual = 3.7016e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.7016e-10, Final residual = 3.7016e-10, No Iterations 0 ExecutionTime = 5.71 s ClockTime = 189 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.1278e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 265 | t 0.00264 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002640 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002640 was stored. Time = 0.00265 DICPBiCGStab: Solving for T, Initial residual = 2.78317e-06, Final residual = 2.10188e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.71348e-10, Final residual = 3.71348e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.71348e-10, Final residual = 3.71348e-10, No Iterations 0 ExecutionTime = 5.72 s ClockTime = 189 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.15915e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 266 | t 0.00265 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002650 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002650 was stored. Time = 0.00266 DICPBiCGStab: Solving for T, Initial residual = 2.78678e-06, Final residual = 2.10764e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.70697e-10, Final residual = 3.70697e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.70697e-10, Final residual = 3.70697e-10, No Iterations 0 ExecutionTime = 5.74 s ClockTime = 190 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.18745e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 267 | t 0.00266 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002660 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002660 was stored. Time = 0.00267 DICPBiCGStab: Solving for T, Initial residual = 2.83638e-06, Final residual = 2.14645e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.73333e-10, Final residual = 3.73333e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.73333e-10, Final residual = 3.73333e-10, No Iterations 0 ExecutionTime = 5.76 s ClockTime = 191 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.22061e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 268 | t 0.00267 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002670 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002670 was stored. Time = 0.00268 DICPBiCGStab: Solving for T, Initial residual = 2.89097e-06, Final residual = 2.18442e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.75773e-10, Final residual = 3.75773e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.75773e-10, Final residual = 3.75773e-10, No Iterations 0 ExecutionTime = 5.77 s ClockTime = 191 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.29232e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 269 | t 0.00268 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002680 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002680 was stored. Time = 0.00269 DICPBiCGStab: Solving for T, Initial residual = 2.94366e-06, Final residual = 2.22094e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.78213e-10, Final residual = 3.78213e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.78213e-10, Final residual = 3.78213e-10, No Iterations 0 ExecutionTime = 5.79 s ClockTime = 192 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.35482e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 270 | t 0.00269 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002690 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002690 was stored. Time = 0.0027 DICPBiCGStab: Solving for T, Initial residual = 2.99304e-06, Final residual = 2.25513e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.80424e-10, Final residual = 3.80424e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.80424e-10, Final residual = 3.80424e-10, No Iterations 0 ExecutionTime = 5.81 s ClockTime = 193 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.42011e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 271 | t 0.0027 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002700 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002700 was stored. Time = 0.00271 DICPBiCGStab: Solving for T, Initial residual = 3.04137e-06, Final residual = 2.28907e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.82631e-10, Final residual = 3.82631e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.82631e-10, Final residual = 3.82631e-10, No Iterations 0 ExecutionTime = 5.82 s ClockTime = 193 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.49066e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 272 | t 0.00271 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002710 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002710 was stored. Time = 0.00272 DICPBiCGStab: Solving for T, Initial residual = 3.06934e-06, Final residual = 2.30787e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.83295e-10, Final residual = 3.83295e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.83295e-10, Final residual = 3.83295e-10, No Iterations 0 ExecutionTime = 5.84 s ClockTime = 194 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.57137e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 273 | t 0.00272 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002720 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002720 was stored. Time = 0.00273 DICPBiCGStab: Solving for T, Initial residual = 3.08758e-06, Final residual = 2.323e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.8376e-10, Final residual = 3.8376e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.8376e-10, Final residual = 3.8376e-10, No Iterations 0 ExecutionTime = 5.85 s ClockTime = 194 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.64293e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 274 | t 0.00273 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002730 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002730 was stored. Time = 0.00274 DICPBiCGStab: Solving for T, Initial residual = 3.13613e-06, Final residual = 2.35583e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.85929e-10, Final residual = 3.85929e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.85929e-10, Final residual = 3.85929e-10, No Iterations 0 ExecutionTime = 5.87 s ClockTime = 195 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.705e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 275 | t 0.00274 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002740 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002740 was stored. Time = 0.00275 DICPBiCGStab: Solving for T, Initial residual = 3.21585e-06, Final residual = 2.41128e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.90348e-10, Final residual = 3.90348e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.90348e-10, Final residual = 3.90348e-10, No Iterations 0 ExecutionTime = 5.88 s ClockTime = 196 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.78748e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 276 | t 0.00275 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002750 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002750 was stored. Time = 0.00276 DICPBiCGStab: Solving for T, Initial residual = 3.30763e-06, Final residual = 2.47635e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.95752e-10, Final residual = 3.95752e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.95752e-10, Final residual = 3.95752e-10, No Iterations 0 ExecutionTime = 5.9 s ClockTime = 196 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.88144e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 277 | t 0.00276 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002760 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002760 was stored. Time = 0.00277 DICPBiCGStab: Solving for T, Initial residual = 3.39095e-06, Final residual = 2.53644e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 4.00624e-10, Final residual = 4.00624e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 4.00624e-10, Final residual = 4.00624e-10, No Iterations 0 ExecutionTime = 5.91 s ClockTime = 197 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.97263e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 278 | t 0.00277 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002770 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002770 was stored. Time = 0.00278 DICPBiCGStab: Solving for T, Initial residual = 3.46175e-06, Final residual = 2.58829e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 4.04739e-10, Final residual = 4.04739e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 4.04739e-10, Final residual = 4.04739e-10, No Iterations 0 ExecutionTime = 5.93 s ClockTime = 197 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.05927e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 279 | t 0.00278 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002780 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002780 was stored. Time = 0.00279 DICPBiCGStab: Solving for T, Initial residual = 3.52629e-06, Final residual = 2.6357e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 4.08369e-10, Final residual = 4.08369e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 4.08369e-10, Final residual = 4.08369e-10, No Iterations 0 ExecutionTime = 5.95 s ClockTime = 198 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.14728e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 280 | t 0.00279 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002790 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002790 was stored. Time = 0.0028 DICPBiCGStab: Solving for T, Initial residual = 3.60558e-06, Final residual = 2.69317e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 4.1303e-10, Final residual = 4.1303e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 4.1303e-10, Final residual = 4.1303e-10, No Iterations 0 ExecutionTime = 5.96 s ClockTime = 199 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.24563e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 281 | t 0.0028 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002800 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002800 was stored. Time = 0.00281 DICPBiCGStab: Solving for T, Initial residual = 3.6968e-06, Final residual = 2.75926e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 4.18208e-10, Final residual = 4.18208e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 4.18208e-10, Final residual = 4.18208e-10, No Iterations 0 ExecutionTime = 5.98 s ClockTime = 199 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.35164e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 282 | t 0.00281 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002810 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002810 was stored. Time = 0.00282 DICPBiCGStab: Solving for T, Initial residual = 3.78957e-06, Final residual = 2.82631e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 4.27502e-10, Final residual = 4.27502e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 4.27502e-10, Final residual = 4.27502e-10, No Iterations 0 ExecutionTime = 5.99 s ClockTime = 200 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.45984e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 283 | t 0.00282 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002820 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002820 was stored. Time = 0.00283 DICPBiCGStab: Solving for T, Initial residual = 3.87904e-06, Final residual = 2.89191e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 4.32602e-10, Final residual = 4.32602e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 4.32602e-10, Final residual = 4.32602e-10, No Iterations 0 ExecutionTime = 6.01 s ClockTime = 201 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.56912e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 284 | t 0.00283 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002830 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002830 was stored. Time = 0.00284 DICPBiCGStab: Solving for T, Initial residual = 3.96427e-06, Final residual = 2.95468e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 4.37325e-10, Final residual = 4.37325e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 4.37325e-10, Final residual = 4.37325e-10, No Iterations 0 ExecutionTime = 6.02 s ClockTime = 201 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.67985e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 285 | t 0.00284 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002840 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002840 was stored. Time = 0.00285 DICPBiCGStab: Solving for T, Initial residual = 4.04652e-06, Final residual = 3.01514e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 4.41877e-10, Final residual = 4.41877e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 4.41877e-10, Final residual = 4.41877e-10, No Iterations 0 ExecutionTime = 6.04 s ClockTime = 202 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.79367e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 286 | t 0.00285 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002850 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002850 was stored. Time = 0.00286 DICPBiCGStab: Solving for T, Initial residual = 4.12865e-06, Final residual = 3.07524e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 4.46486e-10, Final residual = 4.46486e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 4.46486e-10, Final residual = 4.46486e-10, No Iterations 0 ExecutionTime = 6.06 s ClockTime = 202 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.9118e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 287 | t 0.00286 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002860 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002860 was stored. Time = 0.00287 DICPBiCGStab: Solving for T, Initial residual = 4.22534e-06, Final residual = 3.14518e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 4.52065e-10, Final residual = 4.52065e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 4.52065e-10, Final residual = 4.52065e-10, No Iterations 0 ExecutionTime = 6.07 s ClockTime = 203 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 4.04058e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 288 | t 0.00287 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002870 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002870 was stored. Time = 0.00288 DICPBiCGStab: Solving for T, Initial residual = 4.33654e-06, Final residual = 3.22604e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 4.58801e-10, Final residual = 4.58801e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 4.58801e-10, Final residual = 4.58801e-10, No Iterations 0 ExecutionTime = 6.08 s ClockTime = 204 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 4.17946e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 289 | t 0.00288 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002880 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002880 was stored. Time = 0.00289 DICPBiCGStab: Solving for T, Initial residual = 4.44735e-06, Final residual = 3.30676e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 4.65566e-10, Final residual = 4.65566e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 4.65566e-10, Final residual = 4.65566e-10, No Iterations 0 ExecutionTime = 6.1 s ClockTime = 204 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 4.3201e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 290 | t 0.00289 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002890 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002890 was stored. Time = 0.0029 DICPBiCGStab: Solving for T, Initial residual = 4.55019e-06, Final residual = 3.38211e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 4.7175e-10, Final residual = 4.7175e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 4.7175e-10, Final residual = 4.7175e-10, No Iterations 0 ExecutionTime = 6.12 s ClockTime = 205 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 4.45862e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 291 | t 0.0029 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002900 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002900 was stored. Time = 0.00291 DICPBiCGStab: Solving for T, Initial residual = 4.65007e-06, Final residual = 3.4555e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 4.77891e-10, Final residual = 4.77891e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 4.77891e-10, Final residual = 4.77891e-10, No Iterations 0 ExecutionTime = 6.13 s ClockTime = 205 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 4.59961e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 292 | t 0.00291 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002910 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002910 was stored. Time = 0.00292 DICPBiCGStab: Solving for T, Initial residual = 4.75245e-06, Final residual = 3.53097e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 4.84223e-10, Final residual = 4.84223e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 4.84223e-10, Final residual = 4.84223e-10, No Iterations 0 ExecutionTime = 6.15 s ClockTime = 206 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 4.74646e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 293 | t 0.00292 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002920 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002920 was stored. Time = 0.00293 DICPBiCGStab: Solving for T, Initial residual = 4.85796e-06, Final residual = 3.60907e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 4.9078e-10, Final residual = 4.9078e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 4.9078e-10, Final residual = 4.9078e-10, No Iterations 0 ExecutionTime = 6.17 s ClockTime = 207 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 4.89854e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 294 | t 0.00293 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002930 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002930 was stored. Time = 0.00294 DICPBiCGStab: Solving for T, Initial residual = 4.9672e-06, Final residual = 3.69046e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 4.9781e-10, Final residual = 4.9781e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 4.9781e-10, Final residual = 4.9781e-10, No Iterations 0 ExecutionTime = 6.18 s ClockTime = 207 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 5.05461e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 295 | t 0.00294 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002940 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002940 was stored. Time = 0.00295 DICPBiCGStab: Solving for T, Initial residual = 5.08047e-06, Final residual = 3.77463e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 5.05065e-10, Final residual = 5.05065e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 5.05065e-10, Final residual = 5.05065e-10, No Iterations 0 ExecutionTime = 6.2 s ClockTime = 208 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 5.2145e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 296 | t 0.00295 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002950 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002950 was stored. Time = 0.00296 DICPBiCGStab: Solving for T, Initial residual = 5.19761e-06, Final residual = 3.86081e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 5.12548e-10, Final residual = 5.12548e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 5.12548e-10, Final residual = 5.12548e-10, No Iterations 0 ExecutionTime = 6.21 s ClockTime = 209 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 5.37922e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 297 | t 0.00296 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002960 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002960 was stored. Time = 0.00297 DICPBiCGStab: Solving for T, Initial residual = 5.31856e-06, Final residual = 3.94962e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 5.20277e-10, Final residual = 5.20277e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 5.20277e-10, Final residual = 5.20277e-10, No Iterations 0 ExecutionTime = 6.23 s ClockTime = 209 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 5.5494e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 298 | t 0.00297 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002970 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002970 was stored. Time = 0.00298 DICPBiCGStab: Solving for T, Initial residual = 5.44324e-06, Final residual = 4.04109e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 5.28392e-10, Final residual = 5.28392e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 5.28392e-10, Final residual = 5.28392e-10, No Iterations 0 ExecutionTime = 6.24 s ClockTime = 210 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 5.7261e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 299 | t 0.00298 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002980 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002980 was stored. Time = 0.00299 DICPBiCGStab: Solving for T, Initial residual = 5.57575e-06, Final residual = 4.13826e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 5.37077e-10, Final residual = 5.37077e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 5.37077e-10, Final residual = 5.37077e-10, No Iterations 0 ExecutionTime = 6.26 s ClockTime = 210 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 5.91109e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 300 | t 0.00299 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.002990 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.002990 was stored. Time = 0.003 DICPBiCGStab: Solving for T, Initial residual = 5.71411e-06, Final residual = 4.23917e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 5.46156e-10, Final residual = 5.46156e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 5.46156e-10, Final residual = 5.46156e-10, No Iterations 0 ExecutionTime = 6.36 s ClockTime = 212 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 6.10303e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 301 | t 0.003 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003000 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003000 was stored. ---[preciceAdapter] The coupling timestep completed. Writing the updated results. Time = 0.00301 DICPBiCGStab: Solving for T, Initial residual = 5.85048e-06, Final residual = 4.33864e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 5.55055e-10, Final residual = 5.55055e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 5.55055e-10, Final residual = 5.55055e-10, No Iterations 0 ExecutionTime = 6.39 s ClockTime = 213 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 6.29797e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 302 | t 0.00301 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003010 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003010 was stored. Time = 0.00302 DICPBiCGStab: Solving for T, Initial residual = 5.98183e-06, Final residual = 4.43432e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 5.63677e-10, Final residual = 5.63677e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 5.63677e-10, Final residual = 5.63677e-10, No Iterations 0 ExecutionTime = 6.41 s ClockTime = 213 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 6.49452e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 303 | t 0.00302 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003020 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003020 was stored. Time = 0.00303 DICPBiCGStab: Solving for T, Initial residual = 6.11046e-06, Final residual = 4.52861e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 5.72114e-10, Final residual = 5.72114e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 5.72114e-10, Final residual = 5.72114e-10, No Iterations 0 ExecutionTime = 6.42 s ClockTime = 214 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 6.69488e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 304 | t 0.00303 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003030 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003030 was stored. Time = 0.00304 DICPBiCGStab: Solving for T, Initial residual = 6.24448e-06, Final residual = 4.62644e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 5.80945e-10, Final residual = 5.80945e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 5.80945e-10, Final residual = 5.80945e-10, No Iterations 0 ExecutionTime = 6.45 s ClockTime = 215 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 6.90245e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 305 | t 0.00304 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003040 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003040 was stored. Time = 0.00305 DICPBiCGStab: Solving for T, Initial residual = 6.38984e-06, Final residual = 4.73237e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 5.9058e-10, Final residual = 5.9058e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 5.9058e-10, Final residual = 5.9058e-10, No Iterations 0 ExecutionTime = 6.46 s ClockTime = 215 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 7.11858e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 306 | t 0.00305 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003050 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003050 was stored. Time = 0.00306 DICPBiCGStab: Solving for T, Initial residual = 6.53875e-06, Final residual = 4.84103e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 6.00569e-10, Final residual = 6.00569e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 6.00569e-10, Final residual = 6.00569e-10, No Iterations 0 ExecutionTime = 6.47 s ClockTime = 216 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 7.33906e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 307 | t 0.00306 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003060 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003060 was stored. Time = 0.00307 DICPBiCGStab: Solving for T, Initial residual = 6.6876e-06, Final residual = 4.94874e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 6.10393e-10, Final residual = 6.10393e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 6.10393e-10, Final residual = 6.10393e-10, No Iterations 0 ExecutionTime = 6.49 s ClockTime = 216 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 7.56285e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 308 | t 0.00307 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003070 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003070 was stored. Time = 0.00308 DICPBiCGStab: Solving for T, Initial residual = 6.83835e-06, Final residual = 5.05805e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 6.20372e-10, Final residual = 6.20372e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 6.20372e-10, Final residual = 6.20372e-10, No Iterations 0 ExecutionTime = 6.51 s ClockTime = 217 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 7.79206e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 309 | t 0.00308 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003080 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003080 was stored. Time = 0.00309 DICPBiCGStab: Solving for T, Initial residual = 6.9987e-06, Final residual = 5.17435e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 6.31098e-10, Final residual = 6.31098e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 6.31098e-10, Final residual = 6.31098e-10, No Iterations 0 ExecutionTime = 6.53 s ClockTime = 218 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 8.02918e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 310 | t 0.00309 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003090 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003090 was stored. Time = 0.0031 DICPBiCGStab: Solving for T, Initial residual = 7.16596e-06, Final residual = 5.29612e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 6.424e-10, Final residual = 6.424e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 6.424e-10, Final residual = 6.424e-10, No Iterations 0 ExecutionTime = 6.54 s ClockTime = 218 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 8.27192e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 311 | t 0.0031 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003100 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003100 was stored. Time = 0.00311 DICPBiCGStab: Solving for T, Initial residual = 7.33269e-06, Final residual = 5.41661e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 6.53578e-10, Final residual = 6.53578e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 6.53578e-10, Final residual = 6.53578e-10, No Iterations 0 ExecutionTime = 6.55 s ClockTime = 219 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 8.51766e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 312 | t 0.00311 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003110 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003110 was stored. Time = 0.00312 DICPBiCGStab: Solving for T, Initial residual = 7.49597e-06, Final residual = 5.53516e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 6.64542e-10, Final residual = 6.64542e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 6.64542e-10, Final residual = 6.64542e-10, No Iterations 0 ExecutionTime = 6.57 s ClockTime = 220 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 8.76678e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 313 | t 0.00312 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003120 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003120 was stored. Time = 0.00313 DICPBiCGStab: Solving for T, Initial residual = 7.66092e-06, Final residual = 5.65509e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 6.75811e-10, Final residual = 6.75811e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 6.75811e-10, Final residual = 6.75811e-10, No Iterations 0 ExecutionTime = 6.58 s ClockTime = 220 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 9.02116e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 314 | t 0.00313 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003130 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003130 was stored. Time = 0.00314 DICPBiCGStab: Solving for T, Initial residual = 7.83862e-06, Final residual = 5.78479e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 6.85917e-10, Final residual = 6.85917e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 6.85917e-10, Final residual = 6.85917e-10, No Iterations 0 ExecutionTime = 6.6 s ClockTime = 221 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 9.28247e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 315 | t 0.00314 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003140 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003140 was stored. Time = 0.00315 DICPBiCGStab: Solving for T, Initial residual = 8.02457e-06, Final residual = 5.91952e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 6.98764e-10, Final residual = 6.98764e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 6.98764e-10, Final residual = 6.98764e-10, No Iterations 0 ExecutionTime = 6.62 s ClockTime = 221 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 9.54961e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 316 | t 0.00315 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003150 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003150 was stored. Time = 0.00316 DICPBiCGStab: Solving for T, Initial residual = 8.21483e-06, Final residual = 6.05697e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 7.11864e-10, Final residual = 7.11864e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 7.11864e-10, Final residual = 7.11864e-10, No Iterations 0 ExecutionTime = 6.64 s ClockTime = 222 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 9.8207e-09, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 317 | t 0.00316 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003160 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003160 was stored. Time = 0.00317 DICPBiCGStab: Solving for T, Initial residual = 8.40921e-06, Final residual = 6.19803e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 7.25377e-10, Final residual = 7.25377e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 7.25377e-10, Final residual = 7.25377e-10, No Iterations 0 ExecutionTime = 6.65 s ClockTime = 223 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.00967e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 318 | t 0.00317 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003170 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003170 was stored. Time = 0.00318 DICPBiCGStab: Solving for T, Initial residual = 8.60313e-06, Final residual = 6.33902e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 7.38947e-10, Final residual = 7.38947e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 7.38947e-10, Final residual = 7.38947e-10, No Iterations 0 ExecutionTime = 6.66 s ClockTime = 223 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.03757e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 319 | t 0.00318 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003180 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003180 was stored. Time = 0.00319 DICPBiCGStab: Solving for T, Initial residual = 8.79579e-06, Final residual = 6.47915e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 7.52417e-10, Final residual = 7.52417e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 7.52417e-10, Final residual = 7.52417e-10, No Iterations 0 ExecutionTime = 6.68 s ClockTime = 224 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.0657e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 320 | t 0.00319 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003190 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003190 was stored. Time = 0.0032 DICPBiCGStab: Solving for T, Initial residual = 9.00963e-06, Final residual = 6.63398e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 7.67265e-10, Final residual = 7.67265e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 7.67265e-10, Final residual = 7.67265e-10, No Iterations 0 ExecutionTime = 6.69 s ClockTime = 225 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.09483e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 321 | t 0.0032 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003200 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003200 was stored. Time = 0.00321 DICPBiCGStab: Solving for T, Initial residual = 9.23542e-06, Final residual = 6.79683e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 7.83087e-10, Final residual = 7.83087e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 7.83087e-10, Final residual = 7.83087e-10, No Iterations 0 ExecutionTime = 6.72 s ClockTime = 225 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.12478e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 322 | t 0.00321 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003210 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003210 was stored. Time = 0.00322 DICPBiCGStab: Solving for T, Initial residual = 9.45254e-06, Final residual = 6.95397e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 7.9824e-10, Final residual = 7.9824e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 7.9824e-10, Final residual = 7.9824e-10, No Iterations 0 ExecutionTime = 6.73 s ClockTime = 226 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.15456e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 323 | t 0.00322 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003220 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003220 was stored. Time = 0.00323 DICPBiCGStab: Solving for T, Initial residual = 9.6674e-06, Final residual = 7.12019e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 8.20764e-10, Final residual = 8.20764e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 8.20764e-10, Final residual = 8.20764e-10, No Iterations 0 ExecutionTime = 6.75 s ClockTime = 226 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.18425e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 324 | t 0.00323 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003230 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003230 was stored. Time = 0.00324 DICPBiCGStab: Solving for T, Initial residual = 9.87191e-06, Final residual = 7.26738e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 8.3464e-10, Final residual = 8.3464e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 8.3464e-10, Final residual = 8.3464e-10, No Iterations 0 ExecutionTime = 6.76 s ClockTime = 227 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.21422e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 325 | t 0.00324 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003240 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003240 was stored. Time = 0.00325 DICPBiCGStab: Solving for T, Initial residual = 1.00796e-05, Final residual = 7.41737e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 8.49348e-10, Final residual = 8.49348e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 8.49348e-10, Final residual = 8.49348e-10, No Iterations 0 ExecutionTime = 6.78 s ClockTime = 228 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.24484e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 326 | t 0.00325 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003250 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003250 was stored. Time = 0.00326 DICPBiCGStab: Solving for T, Initial residual = 1.0291e-05, Final residual = 7.56914e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 8.63317e-10, Final residual = 8.63317e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 8.63317e-10, Final residual = 8.63317e-10, No Iterations 0 ExecutionTime = 6.79 s ClockTime = 228 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.27607e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 327 | t 0.00326 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003260 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003260 was stored. Time = 0.00327 DICPBiCGStab: Solving for T, Initial residual = 1.05072e-05, Final residual = 7.7235e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 8.7825e-10, Final residual = 8.7825e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 8.7825e-10, Final residual = 8.7825e-10, No Iterations 0 ExecutionTime = 6.81 s ClockTime = 229 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.30792e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 328 | t 0.00327 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003270 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003270 was stored. Time = 0.00328 DICPBiCGStab: Solving for T, Initial residual = 1.07302e-05, Final residual = 7.88225e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 8.9384e-10, Final residual = 8.9384e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 8.9384e-10, Final residual = 8.9384e-10, No Iterations 0 ExecutionTime = 6.82 s ClockTime = 229 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.34037e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 329 | t 0.00328 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003280 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003280 was stored. Time = 0.00329 DICPBiCGStab: Solving for T, Initial residual = 1.09627e-05, Final residual = 8.04659e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 9.10019e-10, Final residual = 9.10019e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 9.10019e-10, Final residual = 9.10019e-10, No Iterations 0 ExecutionTime = 6.83 s ClockTime = 230 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.37331e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 330 | t 0.00329 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003290 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003290 was stored. Time = 0.0033 DICPBiCGStab: Solving for T, Initial residual = 1.11962e-05, Final residual = 8.21282e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 9.24868e-10, Final residual = 9.24868e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 9.24868e-10, Final residual = 9.24868e-10, No Iterations 0 ExecutionTime = 6.85 s ClockTime = 231 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.40671e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 331 | t 0.0033 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003300 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003300 was stored. Time = 0.00331 DICPBiCGStab: Solving for T, Initial residual = 1.14247e-05, Final residual = 8.37678e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 9.41102e-10, Final residual = 9.41102e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 9.41102e-10, Final residual = 9.41102e-10, No Iterations 0 ExecutionTime = 6.87 s ClockTime = 231 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.44011e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 332 | t 0.00331 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003310 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003310 was stored. Time = 0.00332 DICPBiCGStab: Solving for T, Initial residual = 1.16499e-05, Final residual = 8.5386e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 9.57257e-10, Final residual = 9.57257e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 9.57257e-10, Final residual = 9.57257e-10, No Iterations 0 ExecutionTime = 6.88 s ClockTime = 232 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.47346e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 333 | t 0.00332 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003320 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003320 was stored. Time = 0.00333 DICPBiCGStab: Solving for T, Initial residual = 1.18843e-05, Final residual = 8.70738e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 9.73829e-10, Final residual = 9.73829e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 9.73829e-10, Final residual = 9.73829e-10, No Iterations 0 ExecutionTime = 6.9 s ClockTime = 232 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.50705e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 334 | t 0.00333 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003330 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003330 was stored. Time = 0.00334 DICPBiCGStab: Solving for T, Initial residual = 1.21257e-05, Final residual = 8.88e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 9.90928e-10, Final residual = 9.90928e-10, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 9.90928e-10, Final residual = 9.90928e-10, No Iterations 0 ExecutionTime = 6.92 s ClockTime = 233 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.54097e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 335 | t 0.00334 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003340 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003340 was stored. Time = 0.00335 DICPBiCGStab: Solving for T, Initial residual = 1.23738e-05, Final residual = 9.05764e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.00838e-09, Final residual = 1.00838e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.00838e-09, Final residual = 1.00838e-09, No Iterations 0 ExecutionTime = 6.94 s ClockTime = 234 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.57539e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 336 | t 0.00335 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003350 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003350 was stored. Time = 0.00336 DICPBiCGStab: Solving for T, Initial residual = 1.26231e-05, Final residual = 9.23436e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.02579e-09, Final residual = 1.02579e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.02579e-09, Final residual = 1.02579e-09, No Iterations 0 ExecutionTime = 6.95 s ClockTime = 234 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.61019e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 337 | t 0.00336 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003360 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003360 was stored. Time = 0.00337 DICPBiCGStab: Solving for T, Initial residual = 1.28702e-05, Final residual = 9.41118e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.04348e-09, Final residual = 1.04348e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.04348e-09, Final residual = 1.04348e-09, No Iterations 0 ExecutionTime = 6.97 s ClockTime = 235 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.64514e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 338 | t 0.00337 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003370 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003370 was stored. Time = 0.00338 DICPBiCGStab: Solving for T, Initial residual = 1.31173e-05, Final residual = 9.5882e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.06064e-09, Final residual = 1.06064e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.06064e-09, Final residual = 1.06064e-09, No Iterations 0 ExecutionTime = 6.98 s ClockTime = 236 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.68007e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 339 | t 0.00338 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003380 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003380 was stored. Time = 0.00339 DICPBiCGStab: Solving for T, Initial residual = 1.33702e-05, Final residual = 9.76845e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.07905e-09, Final residual = 1.07905e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.07905e-09, Final residual = 1.07905e-09, No Iterations 0 ExecutionTime = 7 s ClockTime = 236 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.71502e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 340 | t 0.00339 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003390 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003390 was stored. Time = 0.0034 DICPBiCGStab: Solving for T, Initial residual = 1.36279e-05, Final residual = 9.95233e-10, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.09736e-09, Final residual = 1.09736e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.09736e-09, Final residual = 1.09736e-09, No Iterations 0 ExecutionTime = 7.01 s ClockTime = 237 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.75018e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 341 | t 0.0034 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003400 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003400 was stored. Time = 0.00341 DICPBiCGStab: Solving for T, Initial residual = 1.38972e-05, Final residual = 1.01496e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.16071e-09, Final residual = 1.16071e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.16071e-09, Final residual = 1.16071e-09, No Iterations 0 ExecutionTime = 7.03 s ClockTime = 237 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.78554e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 342 | t 0.00341 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003410 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003410 was stored. Time = 0.00342 DICPBiCGStab: Solving for T, Initial residual = 1.41532e-05, Final residual = 1.03318e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.17982e-09, Final residual = 1.17982e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.17982e-09, Final residual = 1.17982e-09, No Iterations 0 ExecutionTime = 7.05 s ClockTime = 238 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.82095e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 343 | t 0.00342 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003420 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003420 was stored. Time = 0.00343 DICPBiCGStab: Solving for T, Initial residual = 1.44217e-05, Final residual = 1.05293e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.24761e-09, Final residual = 1.24761e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.24761e-09, Final residual = 1.24761e-09, No Iterations 0 ExecutionTime = 7.06 s ClockTime = 239 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.8566e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 344 | t 0.00343 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003430 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003430 was stored. Time = 0.00344 DICPBiCGStab: Solving for T, Initial residual = 1.46773e-05, Final residual = 1.0712e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.26694e-09, Final residual = 1.26694e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.26694e-09, Final residual = 1.26694e-09, No Iterations 0 ExecutionTime = 7.08 s ClockTime = 239 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.89222e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 345 | t 0.00344 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003440 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003440 was stored. Time = 0.00345 DICPBiCGStab: Solving for T, Initial residual = 1.49243e-05, Final residual = 1.08889e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.28308e-09, Final residual = 1.28308e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.28308e-09, Final residual = 1.28308e-09, No Iterations 0 ExecutionTime = 7.09 s ClockTime = 240 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.92764e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 346 | t 0.00345 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003450 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003450 was stored. Time = 0.00346 DICPBiCGStab: Solving for T, Initial residual = 1.5178e-05, Final residual = 1.10702e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.29943e-09, Final residual = 1.29943e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.29943e-09, Final residual = 1.29943e-09, No Iterations 0 ExecutionTime = 7.11 s ClockTime = 240 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.96326e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 347 | t 0.00346 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003460 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003460 was stored. Time = 0.00347 DICPBiCGStab: Solving for T, Initial residual = 1.54343e-05, Final residual = 1.12528e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.31617e-09, Final residual = 1.31617e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.31617e-09, Final residual = 1.31617e-09, No Iterations 0 ExecutionTime = 7.12 s ClockTime = 241 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.99898e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 348 | t 0.00347 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003470 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003470 was stored. Time = 0.00348 DICPBiCGStab: Solving for T, Initial residual = 1.56946e-05, Final residual = 1.14399e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.33327e-09, Final residual = 1.33327e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.33327e-09, Final residual = 1.33327e-09, No Iterations 0 ExecutionTime = 7.14 s ClockTime = 242 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.03432e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 349 | t 0.00348 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003480 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003480 was stored. Time = 0.00349 DICPBiCGStab: Solving for T, Initial residual = 1.59529e-05, Final residual = 1.16249e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.34976e-09, Final residual = 1.34976e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.34976e-09, Final residual = 1.34976e-09, No Iterations 0 ExecutionTime = 7.15 s ClockTime = 242 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.06945e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 350 | t 0.00349 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003490 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003490 was stored. Time = 0.0035 DICPBiCGStab: Solving for T, Initial residual = 1.6211e-05, Final residual = 1.18112e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.36589e-09, Final residual = 1.36589e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.36589e-09, Final residual = 1.36589e-09, No Iterations 0 ExecutionTime = 7.17 s ClockTime = 243 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.10417e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 351 | t 0.0035 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003500 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003500 was stored. Time = 0.00351 DICPBiCGStab: Solving for T, Initial residual = 1.64687e-05, Final residual = 1.19973e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.382e-09, Final residual = 1.382e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.382e-09, Final residual = 1.382e-09, No Iterations 0 ExecutionTime = 7.18 s ClockTime = 244 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.13854e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 352 | t 0.00351 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003510 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003510 was stored. Time = 0.00352 DICPBiCGStab: Solving for T, Initial residual = 1.67267e-05, Final residual = 1.21828e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.39619e-09, Final residual = 1.39619e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.39619e-09, Final residual = 1.39619e-09, No Iterations 0 ExecutionTime = 7.2 s ClockTime = 244 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.17262e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 353 | t 0.00352 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003520 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003520 was stored. Time = 0.00353 DICPBiCGStab: Solving for T, Initial residual = 1.69912e-05, Final residual = 1.23751e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.41885e-09, Final residual = 1.41885e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.41885e-09, Final residual = 1.41885e-09, No Iterations 0 ExecutionTime = 7.21 s ClockTime = 245 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.20651e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 354 | t 0.00353 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003530 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003530 was stored. Time = 0.00354 DICPBiCGStab: Solving for T, Initial residual = 1.72538e-05, Final residual = 1.25631e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.43659e-09, Final residual = 1.43659e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.43659e-09, Final residual = 1.43659e-09, No Iterations 0 ExecutionTime = 7.23 s ClockTime = 245 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.24023e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 355 | t 0.00354 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003540 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003540 was stored. Time = 0.00355 DICPBiCGStab: Solving for T, Initial residual = 1.75084e-05, Final residual = 1.27455e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.45508e-09, Final residual = 1.45508e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.45508e-09, Final residual = 1.45508e-09, No Iterations 0 ExecutionTime = 7.24 s ClockTime = 246 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.27367e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 356 | t 0.00355 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003550 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003550 was stored. Time = 0.00356 DICPBiCGStab: Solving for T, Initial residual = 1.77587e-05, Final residual = 1.29251e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.47317e-09, Final residual = 1.47317e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.47317e-09, Final residual = 1.47317e-09, No Iterations 0 ExecutionTime = 7.26 s ClockTime = 247 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.30683e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 357 | t 0.00356 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003560 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003560 was stored. Time = 0.00357 DICPBiCGStab: Solving for T, Initial residual = 1.80045e-05, Final residual = 1.31019e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.49079e-09, Final residual = 1.49079e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.49079e-09, Final residual = 1.49079e-09, No Iterations 0 ExecutionTime = 7.27 s ClockTime = 247 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.33971e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 358 | t 0.00357 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003570 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003570 was stored. Time = 0.00358 DICPBiCGStab: Solving for T, Initial residual = 1.82498e-05, Final residual = 1.3277e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.50864e-09, Final residual = 1.50864e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.50864e-09, Final residual = 1.50864e-09, No Iterations 0 ExecutionTime = 7.29 s ClockTime = 248 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.37246e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 359 | t 0.00358 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003580 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003580 was stored. Time = 0.00359 DICPBiCGStab: Solving for T, Initial residual = 1.85005e-05, Final residual = 1.3455e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.52732e-09, Final residual = 1.52732e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.52732e-09, Final residual = 1.52732e-09, No Iterations 0 ExecutionTime = 7.31 s ClockTime = 249 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.40524e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 360 | t 0.00359 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003590 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003590 was stored. Time = 0.0036 DICPBiCGStab: Solving for T, Initial residual = 1.87609e-05, Final residual = 1.36414e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.54713e-09, Final residual = 1.54713e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.54713e-09, Final residual = 1.54713e-09, No Iterations 0 ExecutionTime = 7.33 s ClockTime = 249 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.43803e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 361 | t 0.0036 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003600 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003600 was stored. Time = 0.00361 DICPBiCGStab: Solving for T, Initial residual = 1.90175e-05, Final residual = 1.38246e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.56686e-09, Final residual = 1.56686e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.56686e-09, Final residual = 1.56686e-09, No Iterations 0 ExecutionTime = 7.34 s ClockTime = 250 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.47018e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 362 | t 0.00361 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003610 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003610 was stored. Time = 0.00362 DICPBiCGStab: Solving for T, Initial residual = 1.92577e-05, Final residual = 1.39957e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.58699e-09, Final residual = 1.58699e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.58699e-09, Final residual = 1.58699e-09, No Iterations 0 ExecutionTime = 7.36 s ClockTime = 251 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.50137e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 363 | t 0.00362 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003620 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003620 was stored. Time = 0.00363 DICPBiCGStab: Solving for T, Initial residual = 1.94715e-05, Final residual = 1.41476e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.6096e-09, Final residual = 1.6096e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.6096e-09, Final residual = 1.6096e-09, No Iterations 0 ExecutionTime = 7.37 s ClockTime = 251 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.53197e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 364 | t 0.00363 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003630 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003630 was stored. Time = 0.00364 DICPBiCGStab: Solving for T, Initial residual = 1.96805e-05, Final residual = 1.42972e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.63559e-09, Final residual = 1.63559e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.63559e-09, Final residual = 1.63559e-09, No Iterations 0 ExecutionTime = 7.39 s ClockTime = 252 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.5625e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 365 | t 0.00364 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003640 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003640 was stored. Time = 0.00365 DICPBiCGStab: Solving for T, Initial residual = 1.9903e-05, Final residual = 1.4457e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.66189e-09, Final residual = 1.66189e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.66189e-09, Final residual = 1.66189e-09, No Iterations 0 ExecutionTime = 7.4 s ClockTime = 252 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.59305e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 366 | t 0.00365 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003650 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003650 was stored. Time = 0.00366 DICPBiCGStab: Solving for T, Initial residual = 2.01264e-05, Final residual = 1.46167e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.6893e-09, Final residual = 1.6893e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.6893e-09, Final residual = 1.6893e-09, No Iterations 0 ExecutionTime = 7.42 s ClockTime = 253 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.62359e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 367 | t 0.00366 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003660 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003660 was stored. Time = 0.00367 DICPBiCGStab: Solving for T, Initial residual = 2.03649e-05, Final residual = 1.47888e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.71953e-09, Final residual = 1.71953e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.71953e-09, Final residual = 1.71953e-09, No Iterations 0 ExecutionTime = 7.44 s ClockTime = 254 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.6536e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 368 | t 0.00367 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003670 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003670 was stored. Time = 0.00368 DICPBiCGStab: Solving for T, Initial residual = 2.05948e-05, Final residual = 1.49545e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.74863e-09, Final residual = 1.74863e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.74863e-09, Final residual = 1.74863e-09, No Iterations 0 ExecutionTime = 7.45 s ClockTime = 254 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.6821e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 369 | t 0.00368 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003680 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003680 was stored. Time = 0.00369 DICPBiCGStab: Solving for T, Initial residual = 2.07993e-05, Final residual = 1.51019e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.77388e-09, Final residual = 1.77388e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.77388e-09, Final residual = 1.77388e-09, No Iterations 0 ExecutionTime = 7.47 s ClockTime = 255 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.70884e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 370 | t 0.00369 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003690 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003690 was stored. Time = 0.0037 DICPBiCGStab: Solving for T, Initial residual = 2.10006e-05, Final residual = 1.52497e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.79749e-09, Final residual = 1.79749e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.79749e-09, Final residual = 1.79749e-09, No Iterations 0 ExecutionTime = 7.48 s ClockTime = 256 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.7344e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 371 | t 0.0037 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003700 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003700 was stored. Time = 0.00371 DICPBiCGStab: Solving for T, Initial residual = 2.11828e-05, Final residual = 1.53819e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.81921e-09, Final residual = 1.81921e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.81921e-09, Final residual = 1.81921e-09, No Iterations 0 ExecutionTime = 7.5 s ClockTime = 256 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.75929e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 372 | t 0.00371 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003710 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003710 was stored. Time = 0.00372 DICPBiCGStab: Solving for T, Initial residual = 2.13629e-05, Final residual = 1.55131e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.8413e-09, Final residual = 1.8413e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.8413e-09, Final residual = 1.8413e-09, No Iterations 0 ExecutionTime = 7.51 s ClockTime = 257 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.78355e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 373 | t 0.00372 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003720 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003720 was stored. Time = 0.00373 DICPBiCGStab: Solving for T, Initial residual = 2.15537e-05, Final residual = 1.56534e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.86554e-09, Final residual = 1.86554e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.86554e-09, Final residual = 1.86554e-09, No Iterations 0 ExecutionTime = 7.53 s ClockTime = 257 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.80698e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 374 | t 0.00373 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003730 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003730 was stored. Time = 0.00374 DICPBiCGStab: Solving for T, Initial residual = 2.17791e-05, Final residual = 1.58205e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.89239e-09, Final residual = 1.89239e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.89239e-09, Final residual = 1.89239e-09, No Iterations 0 ExecutionTime = 7.54 s ClockTime = 258 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.82969e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 375 | t 0.00374 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003740 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003740 was stored. Time = 0.00375 DICPBiCGStab: Solving for T, Initial residual = 2.19809e-05, Final residual = 1.59668e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.90787e-09, Final residual = 1.90787e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.90787e-09, Final residual = 1.90787e-09, No Iterations 0 ExecutionTime = 7.56 s ClockTime = 259 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.8518e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 376 | t 0.00375 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003750 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003750 was stored. Time = 0.00376 DICPBiCGStab: Solving for T, Initial residual = 2.21711e-05, Final residual = 1.61061e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.92075e-09, Final residual = 1.92075e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.92075e-09, Final residual = 1.92075e-09, No Iterations 0 ExecutionTime = 7.57 s ClockTime = 259 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.87331e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 377 | t 0.00376 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003760 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003760 was stored. Time = 0.00377 DICPBiCGStab: Solving for T, Initial residual = 2.23969e-05, Final residual = 1.62722e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.93417e-09, Final residual = 1.93417e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.93417e-09, Final residual = 1.93417e-09, No Iterations 0 ExecutionTime = 7.59 s ClockTime = 260 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.89448e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 378 | t 0.00377 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003770 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003770 was stored. Time = 0.00378 DICPBiCGStab: Solving for T, Initial residual = 2.26209e-05, Final residual = 1.64334e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.94239e-09, Final residual = 1.94239e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.94239e-09, Final residual = 1.94239e-09, No Iterations 0 ExecutionTime = 7.61 s ClockTime = 261 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.91545e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 379 | t 0.00378 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003780 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003780 was stored. Time = 0.00379 DICPBiCGStab: Solving for T, Initial residual = 2.28748e-05, Final residual = 1.66182e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.95719e-09, Final residual = 1.95719e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.95719e-09, Final residual = 1.95719e-09, No Iterations 0 ExecutionTime = 7.63 s ClockTime = 261 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.9365e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 380 | t 0.00379 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003790 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003790 was stored. Time = 0.0038 DICPBiCGStab: Solving for T, Initial residual = 2.31059e-05, Final residual = 1.67874e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.97831e-09, Final residual = 1.97831e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.97831e-09, Final residual = 1.97831e-09, No Iterations 0 ExecutionTime = 7.64 s ClockTime = 262 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.95746e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 381 | t 0.0038 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003800 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003800 was stored. Time = 0.00381 DICPBiCGStab: Solving for T, Initial residual = 2.3287e-05, Final residual = 1.6921e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.00042e-09, Final residual = 2.00042e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.00042e-09, Final residual = 2.00042e-09, No Iterations 0 ExecutionTime = 7.66 s ClockTime = 263 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.97793e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 382 | t 0.00381 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003810 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003810 was stored. Time = 0.00382 DICPBiCGStab: Solving for T, Initial residual = 2.34571e-05, Final residual = 1.70449e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.02509e-09, Final residual = 2.02509e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.02509e-09, Final residual = 2.02509e-09, No Iterations 0 ExecutionTime = 7.67 s ClockTime = 263 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.99799e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 383 | t 0.00382 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003820 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003820 was stored. Time = 0.00383 DICPBiCGStab: Solving for T, Initial residual = 2.36789e-05, Final residual = 1.72089e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.05437e-09, Final residual = 2.05437e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.05437e-09, Final residual = 2.05437e-09, No Iterations 0 ExecutionTime = 7.69 s ClockTime = 264 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.01793e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 384 | t 0.00383 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003830 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003830 was stored. Time = 0.00384 DICPBiCGStab: Solving for T, Initial residual = 2.39151e-05, Final residual = 1.73831e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.07782e-09, Final residual = 2.07782e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.07782e-09, Final residual = 2.07782e-09, No Iterations 0 ExecutionTime = 7.7 s ClockTime = 264 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.03764e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 385 | t 0.00384 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003840 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003840 was stored. Time = 0.00385 DICPBiCGStab: Solving for T, Initial residual = 2.41624e-05, Final residual = 1.75637e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.08571e-09, Final residual = 2.08571e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.08571e-09, Final residual = 2.08571e-09, No Iterations 0 ExecutionTime = 7.73 s ClockTime = 265 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.05685e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 386 | t 0.00385 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003850 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003850 was stored. Time = 0.00386 DICPBiCGStab: Solving for T, Initial residual = 2.43931e-05, Final residual = 1.77288e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.08535e-09, Final residual = 2.08535e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.08535e-09, Final residual = 2.08535e-09, No Iterations 0 ExecutionTime = 7.74 s ClockTime = 266 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.07547e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 387 | t 0.00386 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003860 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003860 was stored. Time = 0.00387 DICPBiCGStab: Solving for T, Initial residual = 2.46041e-05, Final residual = 1.78822e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.08735e-09, Final residual = 2.08735e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.08735e-09, Final residual = 2.08735e-09, No Iterations 0 ExecutionTime = 7.76 s ClockTime = 266 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.09357e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 388 | t 0.00387 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003870 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003870 was stored. Time = 0.00388 DICPBiCGStab: Solving for T, Initial residual = 2.4836e-05, Final residual = 1.80547e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.08517e-09, Final residual = 2.08517e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.08517e-09, Final residual = 2.08517e-09, No Iterations 0 ExecutionTime = 7.77 s ClockTime = 267 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.11129e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 389 | t 0.00388 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003880 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003880 was stored. Time = 0.00389 DICPBiCGStab: Solving for T, Initial residual = 2.50792e-05, Final residual = 1.82368e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.08627e-09, Final residual = 2.08627e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.08627e-09, Final residual = 2.08627e-09, No Iterations 0 ExecutionTime = 7.79 s ClockTime = 268 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.12897e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 390 | t 0.00389 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003890 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003890 was stored. Time = 0.0039 DICPBiCGStab: Solving for T, Initial residual = 2.53115e-05, Final residual = 1.8408e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.08735e-09, Final residual = 2.08735e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.08735e-09, Final residual = 2.08735e-09, No Iterations 0 ExecutionTime = 7.8 s ClockTime = 268 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.14651e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 391 | t 0.0039 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003900 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003900 was stored. Time = 0.00391 DICPBiCGStab: Solving for T, Initial residual = 2.55269e-05, Final residual = 1.85686e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.08902e-09, Final residual = 2.08902e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.08902e-09, Final residual = 2.08902e-09, No Iterations 0 ExecutionTime = 7.82 s ClockTime = 269 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.16344e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 392 | t 0.00391 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003910 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003910 was stored. Time = 0.00392 DICPBiCGStab: Solving for T, Initial residual = 2.57248e-05, Final residual = 1.8715e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.08638e-09, Final residual = 2.08638e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.08638e-09, Final residual = 2.08638e-09, No Iterations 0 ExecutionTime = 7.83 s ClockTime = 270 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.17941e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 393 | t 0.00392 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003920 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003920 was stored. Time = 0.00393 DICPBiCGStab: Solving for T, Initial residual = 2.59108e-05, Final residual = 1.88552e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.08148e-09, Final residual = 2.08148e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.08148e-09, Final residual = 2.08148e-09, No Iterations 0 ExecutionTime = 7.86 s ClockTime = 270 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.19477e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 394 | t 0.00393 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003930 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003930 was stored. Time = 0.00394 DICPBiCGStab: Solving for T, Initial residual = 2.61386e-05, Final residual = 1.90264e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.0828e-09, Final residual = 2.0828e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.0828e-09, Final residual = 2.0828e-09, No Iterations 0 ExecutionTime = 7.87 s ClockTime = 271 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.21084e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 395 | t 0.00394 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003940 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003940 was stored. Time = 0.00395 DICPBiCGStab: Solving for T, Initial residual = 2.63867e-05, Final residual = 1.92139e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.08862e-09, Final residual = 2.08862e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.08862e-09, Final residual = 2.08862e-09, No Iterations 0 ExecutionTime = 7.89 s ClockTime = 272 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.22814e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 396 | t 0.00395 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003950 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003950 was stored. Time = 0.00396 DICPBiCGStab: Solving for T, Initial residual = 2.66028e-05, Final residual = 1.93772e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.08563e-09, Final residual = 2.08563e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.08563e-09, Final residual = 2.08563e-09, No Iterations 0 ExecutionTime = 7.9 s ClockTime = 272 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.24523e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 397 | t 0.00396 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003960 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003960 was stored. Time = 0.00397 DICPBiCGStab: Solving for T, Initial residual = 2.68174e-05, Final residual = 1.95455e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.08023e-09, Final residual = 2.08023e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.08023e-09, Final residual = 2.08023e-09, No Iterations 0 ExecutionTime = 7.92 s ClockTime = 273 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.26138e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 398 | t 0.00397 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003970 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003970 was stored. Time = 0.00398 DICPBiCGStab: Solving for T, Initial residual = 2.70189e-05, Final residual = 1.97132e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.08087e-09, Final residual = 2.08087e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.08087e-09, Final residual = 2.08087e-09, No Iterations 0 ExecutionTime = 7.93 s ClockTime = 274 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.27659e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 399 | t 0.00398 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003980 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003980 was stored. Time = 0.00399 DICPBiCGStab: Solving for T, Initial residual = 2.72306e-05, Final residual = 1.9898e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.0874e-09, Final residual = 2.0874e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.0874e-09, Final residual = 2.0874e-09, No Iterations 0 ExecutionTime = 7.95 s ClockTime = 274 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.29115e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 400 | t 0.00399 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.003990 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.003990 was stored. Time = 0.004 DICPBiCGStab: Solving for T, Initial residual = 2.74513e-05, Final residual = 2.00919e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.09826e-09, Final residual = 2.09826e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.09826e-09, Final residual = 2.09826e-09, No Iterations 0 ExecutionTime = 8.05 s ClockTime = 275 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.30524e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 401 | t 0.004 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004000 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004000 was stored. ---[preciceAdapter] The coupling timestep completed. Writing the updated results. Time = 0.00401 DICPBiCGStab: Solving for T, Initial residual = 2.76804e-05, Final residual = 2.02936e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.11057e-09, Final residual = 2.11057e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.11057e-09, Final residual = 2.11057e-09, No Iterations 0 ExecutionTime = 8.08 s ClockTime = 277 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.31946e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 402 | t 0.00401 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004010 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004010 was stored. Time = 0.00402 DICPBiCGStab: Solving for T, Initial residual = 2.79094e-05, Final residual = 2.04954e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.12511e-09, Final residual = 2.12511e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.12511e-09, Final residual = 2.12511e-09, No Iterations 0 ExecutionTime = 8.1 s ClockTime = 277 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.33368e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 403 | t 0.00402 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004020 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004020 was stored. Time = 0.00403 DICPBiCGStab: Solving for T, Initial residual = 2.81379e-05, Final residual = 2.06975e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.14257e-09, Final residual = 2.14257e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.14257e-09, Final residual = 2.14257e-09, No Iterations 0 ExecutionTime = 8.11 s ClockTime = 278 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.34771e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 404 | t 0.00403 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004030 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004030 was stored. Time = 0.00404 DICPBiCGStab: Solving for T, Initial residual = 2.83506e-05, Final residual = 2.08891e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.16285e-09, Final residual = 2.16285e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.16285e-09, Final residual = 2.16285e-09, No Iterations 0 ExecutionTime = 8.13 s ClockTime = 279 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.36091e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 405 | t 0.00404 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004040 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004040 was stored. Time = 0.00405 DICPBiCGStab: Solving for T, Initial residual = 2.85421e-05, Final residual = 2.10658e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.1838e-09, Final residual = 2.1838e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.1838e-09, Final residual = 2.1838e-09, No Iterations 0 ExecutionTime = 8.14 s ClockTime = 279 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.37317e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 406 | t 0.00405 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004050 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004050 was stored. Time = 0.00406 DICPBiCGStab: Solving for T, Initial residual = 2.87312e-05, Final residual = 2.12404e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.20271e-09, Final residual = 2.20271e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.20271e-09, Final residual = 2.20271e-09, No Iterations 0 ExecutionTime = 8.16 s ClockTime = 280 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.38514e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 407 | t 0.00406 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004060 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004060 was stored. Time = 0.00407 DICPBiCGStab: Solving for T, Initial residual = 2.89231e-05, Final residual = 2.14173e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.2222e-09, Final residual = 2.2222e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.2222e-09, Final residual = 2.2222e-09, No Iterations 0 ExecutionTime = 8.17 s ClockTime = 281 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.39693e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 408 | t 0.00407 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004070 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004070 was stored. Time = 0.00408 DICPBiCGStab: Solving for T, Initial residual = 2.9105e-05, Final residual = 2.15869e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.24151e-09, Final residual = 2.24151e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.24151e-09, Final residual = 2.24151e-09, No Iterations 0 ExecutionTime = 8.2 s ClockTime = 281 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.40795e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 409 | t 0.00408 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004080 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004080 was stored. Time = 0.00409 DICPBiCGStab: Solving for T, Initial residual = 2.92824e-05, Final residual = 2.17531e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.26034e-09, Final residual = 2.26034e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.26034e-09, Final residual = 2.26034e-09, No Iterations 0 ExecutionTime = 8.21 s ClockTime = 282 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.41812e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 410 | t 0.00409 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004090 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004090 was stored. Time = 0.0041 DICPBiCGStab: Solving for T, Initial residual = 2.9446e-05, Final residual = 2.19074e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.2788e-09, Final residual = 2.2788e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.2788e-09, Final residual = 2.2788e-09, No Iterations 0 ExecutionTime = 8.22 s ClockTime = 282 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.4279e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 411 | t 0.0041 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004100 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004100 was stored. Time = 0.00411 DICPBiCGStab: Solving for T, Initial residual = 2.96077e-05, Final residual = 2.20646e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.29715e-09, Final residual = 2.29715e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.29715e-09, Final residual = 2.29715e-09, No Iterations 0 ExecutionTime = 8.24 s ClockTime = 283 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.43761e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 412 | t 0.00411 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004110 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004110 was stored. Time = 0.00412 DICPBiCGStab: Solving for T, Initial residual = 2.97544e-05, Final residual = 2.22152e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.31304e-09, Final residual = 2.31304e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.31304e-09, Final residual = 2.31304e-09, No Iterations 0 ExecutionTime = 8.25 s ClockTime = 284 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.44722e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 413 | t 0.00412 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004120 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004120 was stored. Time = 0.00413 DICPBiCGStab: Solving for T, Initial residual = 2.98898e-05, Final residual = 2.23598e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.32591e-09, Final residual = 2.32591e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.32591e-09, Final residual = 2.32591e-09, No Iterations 0 ExecutionTime = 8.27 s ClockTime = 284 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.45625e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 414 | t 0.00413 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004130 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004130 was stored. Time = 0.00414 DICPBiCGStab: Solving for T, Initial residual = 3.00182e-05, Final residual = 2.24988e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.33682e-09, Final residual = 2.33682e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.33682e-09, Final residual = 2.33682e-09, No Iterations 0 ExecutionTime = 8.29 s ClockTime = 285 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.4643e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 415 | t 0.00414 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004140 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004140 was stored. Time = 0.00415 DICPBiCGStab: Solving for T, Initial residual = 3.01373e-05, Final residual = 2.26298e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.34654e-09, Final residual = 2.34654e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.34654e-09, Final residual = 2.34654e-09, No Iterations 0 ExecutionTime = 8.3 s ClockTime = 286 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.47161e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 416 | t 0.00415 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004150 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004150 was stored. Time = 0.00416 DICPBiCGStab: Solving for T, Initial residual = 3.02583e-05, Final residual = 2.27623e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.35691e-09, Final residual = 2.35691e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.35691e-09, Final residual = 2.35691e-09, No Iterations 0 ExecutionTime = 8.32 s ClockTime = 286 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.47817e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 417 | t 0.00416 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004160 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004160 was stored. Time = 0.00417 DICPBiCGStab: Solving for T, Initial residual = 3.03676e-05, Final residual = 2.28858e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.36758e-09, Final residual = 2.36758e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.36758e-09, Final residual = 2.36758e-09, No Iterations 0 ExecutionTime = 8.33 s ClockTime = 287 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.48386e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 418 | t 0.00417 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004170 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004170 was stored. Time = 0.00418 DICPBiCGStab: Solving for T, Initial residual = 3.04721e-05, Final residual = 2.30048e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.37806e-09, Final residual = 2.37806e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.37806e-09, Final residual = 2.37806e-09, No Iterations 0 ExecutionTime = 8.35 s ClockTime = 288 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.48922e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 419 | t 0.00418 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004180 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004180 was stored. Time = 0.00419 DICPBiCGStab: Solving for T, Initial residual = 3.05667e-05, Final residual = 2.31156e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.38744e-09, Final residual = 2.38744e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.38744e-09, Final residual = 2.38744e-09, No Iterations 0 ExecutionTime = 8.36 s ClockTime = 288 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.49411e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 420 | t 0.00419 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004190 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004190 was stored. Time = 0.0042 DICPBiCGStab: Solving for T, Initial residual = 3.06457e-05, Final residual = 2.32141e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.39498e-09, Final residual = 2.39498e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.39498e-09, Final residual = 2.39498e-09, No Iterations 0 ExecutionTime = 8.38 s ClockTime = 289 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.49818e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 421 | t 0.0042 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004200 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004200 was stored. Time = 0.00421 DICPBiCGStab: Solving for T, Initial residual = 3.07271e-05, Final residual = 2.33153e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.40297e-09, Final residual = 2.40297e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.40297e-09, Final residual = 2.40297e-09, No Iterations 0 ExecutionTime = 8.4 s ClockTime = 289 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.50166e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 422 | t 0.00421 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004210 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004210 was stored. Time = 0.00422 DICPBiCGStab: Solving for T, Initial residual = 3.07901e-05, Final residual = 2.34013e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.40936e-09, Final residual = 2.40936e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.40936e-09, Final residual = 2.40936e-09, No Iterations 0 ExecutionTime = 8.41 s ClockTime = 290 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.50473e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 423 | t 0.00422 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004220 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004220 was stored. Time = 0.00423 DICPBiCGStab: Solving for T, Initial residual = 3.08463e-05, Final residual = 2.34805e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.41442e-09, Final residual = 2.41442e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.41442e-09, Final residual = 2.41442e-09, No Iterations 0 ExecutionTime = 8.43 s ClockTime = 291 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.50749e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 424 | t 0.00423 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004230 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004230 was stored. Time = 0.00424 DICPBiCGStab: Solving for T, Initial residual = 3.08994e-05, Final residual = 2.35558e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.41821e-09, Final residual = 2.41821e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.41821e-09, Final residual = 2.41821e-09, No Iterations 0 ExecutionTime = 8.44 s ClockTime = 291 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.51028e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 425 | t 0.00424 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004240 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004240 was stored. Time = 0.00425 DICPBiCGStab: Solving for T, Initial residual = 3.09651e-05, Final residual = 2.36404e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.42435e-09, Final residual = 2.42435e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.42435e-09, Final residual = 2.42435e-09, No Iterations 0 ExecutionTime = 8.46 s ClockTime = 292 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.51256e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 426 | t 0.00425 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004250 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004250 was stored. Time = 0.00426 DICPBiCGStab: Solving for T, Initial residual = 3.10008e-05, Final residual = 2.37004e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.42778e-09, Final residual = 2.42778e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.42778e-09, Final residual = 2.42778e-09, No Iterations 0 ExecutionTime = 8.47 s ClockTime = 293 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.51389e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 427 | t 0.00426 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004260 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004260 was stored. Time = 0.00427 DICPBiCGStab: Solving for T, Initial residual = 3.10322e-05, Final residual = 2.37554e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.43175e-09, Final residual = 2.43175e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.43175e-09, Final residual = 2.43175e-09, No Iterations 0 ExecutionTime = 8.49 s ClockTime = 293 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.51497e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 428 | t 0.00427 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004270 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004270 was stored. Time = 0.00428 DICPBiCGStab: Solving for T, Initial residual = 3.10675e-05, Final residual = 2.38127e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.43743e-09, Final residual = 2.43743e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.43743e-09, Final residual = 2.43743e-09, No Iterations 0 ExecutionTime = 8.51 s ClockTime = 294 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.51571e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 429 | t 0.00428 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004280 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004280 was stored. Time = 0.00429 DICPBiCGStab: Solving for T, Initial residual = 3.11238e-05, Final residual = 2.3898e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.44634e-09, Final residual = 2.44634e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.44634e-09, Final residual = 2.44634e-09, No Iterations 0 ExecutionTime = 8.52 s ClockTime = 295 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.51651e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 430 | t 0.00429 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004290 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004290 was stored. Time = 0.0043 DICPBiCGStab: Solving for T, Initial residual = 3.11344e-05, Final residual = 2.39455e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.45269e-09, Final residual = 2.45269e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.45269e-09, Final residual = 2.45269e-09, No Iterations 0 ExecutionTime = 8.54 s ClockTime = 295 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.51722e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 431 | t 0.0043 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004300 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004300 was stored. Time = 0.00431 DICPBiCGStab: Solving for T, Initial residual = 3.1162e-05, Final residual = 2.40075e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.46124e-09, Final residual = 2.46124e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.46124e-09, Final residual = 2.46124e-09, No Iterations 0 ExecutionTime = 8.56 s ClockTime = 296 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.51719e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 432 | t 0.00431 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004310 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004310 was stored. Time = 0.00432 DICPBiCGStab: Solving for T, Initial residual = 3.11693e-05, Final residual = 2.40516e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.46563e-09, Final residual = 2.46563e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.46563e-09, Final residual = 2.46563e-09, No Iterations 0 ExecutionTime = 8.58 s ClockTime = 296 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.51639e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 433 | t 0.00432 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004320 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004320 was stored. Time = 0.00433 DICPBiCGStab: Solving for T, Initial residual = 3.11809e-05, Final residual = 2.40965e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.46851e-09, Final residual = 2.46851e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.46851e-09, Final residual = 2.46851e-09, No Iterations 0 ExecutionTime = 8.59 s ClockTime = 297 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.51583e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 434 | t 0.00433 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004330 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004330 was stored. Time = 0.00434 DICPBiCGStab: Solving for T, Initial residual = 3.12034e-05, Final residual = 2.41483e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.47243e-09, Final residual = 2.47243e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.47243e-09, Final residual = 2.47243e-09, No Iterations 0 ExecutionTime = 8.61 s ClockTime = 298 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.51515e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 435 | t 0.00434 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004340 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004340 was stored. Time = 0.00435 DICPBiCGStab: Solving for T, Initial residual = 3.12251e-05, Final residual = 2.41973e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.47639e-09, Final residual = 2.47639e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.47639e-09, Final residual = 2.47639e-09, No Iterations 0 ExecutionTime = 8.62 s ClockTime = 298 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.514e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 436 | t 0.00435 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004350 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004350 was stored. Time = 0.00436 DICPBiCGStab: Solving for T, Initial residual = 3.12236e-05, Final residual = 2.42281e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.47918e-09, Final residual = 2.47918e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.47918e-09, Final residual = 2.47918e-09, No Iterations 0 ExecutionTime = 8.64 s ClockTime = 299 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.51213e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 437 | t 0.00436 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004360 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004360 was stored. Time = 0.00437 DICPBiCGStab: Solving for T, Initial residual = 3.12074e-05, Final residual = 2.42465e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.48226e-09, Final residual = 2.48226e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.48226e-09, Final residual = 2.48226e-09, No Iterations 0 ExecutionTime = 8.65 s ClockTime = 300 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.5097e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 438 | t 0.00437 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004370 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004370 was stored. Time = 0.00438 DICPBiCGStab: Solving for T, Initial residual = 3.11951e-05, Final residual = 2.42668e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.48762e-09, Final residual = 2.48762e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.48762e-09, Final residual = 2.48762e-09, No Iterations 0 ExecutionTime = 8.67 s ClockTime = 300 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.50731e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 439 | t 0.00438 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004380 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004380 was stored. Time = 0.00439 DICPBiCGStab: Solving for T, Initial residual = 3.12295e-05, Final residual = 2.43201e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.49676e-09, Final residual = 2.49676e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.49676e-09, Final residual = 2.49676e-09, No Iterations 0 ExecutionTime = 8.68 s ClockTime = 301 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.50552e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 440 | t 0.00439 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004390 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004390 was stored. Time = 0.0044 DICPBiCGStab: Solving for T, Initial residual = 3.12512e-05, Final residual = 2.43652e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.50429e-09, Final residual = 2.50429e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.50429e-09, Final residual = 2.50429e-09, No Iterations 0 ExecutionTime = 8.7 s ClockTime = 302 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.50475e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 441 | t 0.0044 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004400 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004400 was stored. Time = 0.00441 DICPBiCGStab: Solving for T, Initial residual = 3.12508e-05, Final residual = 2.43922e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.50849e-09, Final residual = 2.50849e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.50849e-09, Final residual = 2.50849e-09, No Iterations 0 ExecutionTime = 8.71 s ClockTime = 302 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.50421e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 442 | t 0.00441 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004410 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004410 was stored. Time = 0.00442 DICPBiCGStab: Solving for T, Initial residual = 3.12459e-05, Final residual = 2.4415e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.51052e-09, Final residual = 2.51052e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.51052e-09, Final residual = 2.51052e-09, No Iterations 0 ExecutionTime = 8.73 s ClockTime = 303 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.50239e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 443 | t 0.00442 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004420 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004420 was stored. Time = 0.00443 DICPBiCGStab: Solving for T, Initial residual = 3.12276e-05, Final residual = 2.44251e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.50974e-09, Final residual = 2.50974e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.50974e-09, Final residual = 2.50974e-09, No Iterations 0 ExecutionTime = 8.75 s ClockTime = 303 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.49934e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 444 | t 0.00443 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004430 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004430 was stored. Time = 0.00444 DICPBiCGStab: Solving for T, Initial residual = 3.12213e-05, Final residual = 2.44446e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.50933e-09, Final residual = 2.50933e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.50933e-09, Final residual = 2.50933e-09, No Iterations 0 ExecutionTime = 8.77 s ClockTime = 304 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.49587e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 445 | t 0.00444 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004440 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004440 was stored. Time = 0.00445 DICPBiCGStab: Solving for T, Initial residual = 3.11909e-05, Final residual = 2.44419e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.50652e-09, Final residual = 2.50652e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.50652e-09, Final residual = 2.50652e-09, No Iterations 0 ExecutionTime = 8.79 s ClockTime = 305 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.49268e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 446 | t 0.00445 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004450 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004450 was stored. Time = 0.00446 DICPBiCGStab: Solving for T, Initial residual = 3.11466e-05, Final residual = 2.4427e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.50267e-09, Final residual = 2.50267e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.50267e-09, Final residual = 2.50267e-09, No Iterations 0 ExecutionTime = 8.81 s ClockTime = 305 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.48882e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 447 | t 0.00446 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004460 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004460 was stored. Time = 0.00447 DICPBiCGStab: Solving for T, Initial residual = 3.10956e-05, Final residual = 2.44052e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.49768e-09, Final residual = 2.49768e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.49768e-09, Final residual = 2.49768e-09, No Iterations 0 ExecutionTime = 8.82 s ClockTime = 306 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.48427e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 448 | t 0.00447 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004470 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004470 was stored. Time = 0.00448 DICPBiCGStab: Solving for T, Initial residual = 3.10371e-05, Final residual = 2.43758e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.4916e-09, Final residual = 2.4916e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.4916e-09, Final residual = 2.4916e-09, No Iterations 0 ExecutionTime = 8.83 s ClockTime = 307 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.47899e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 449 | t 0.00448 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004480 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004480 was stored. Time = 0.00449 DICPBiCGStab: Solving for T, Initial residual = 3.09799e-05, Final residual = 2.43448e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.48638e-09, Final residual = 2.48638e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.48638e-09, Final residual = 2.48638e-09, No Iterations 0 ExecutionTime = 8.85 s ClockTime = 307 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.47344e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 450 | t 0.00449 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004490 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004490 was stored. Time = 0.0045 DICPBiCGStab: Solving for T, Initial residual = 3.0933e-05, Final residual = 2.432e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.48263e-09, Final residual = 2.48263e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.48263e-09, Final residual = 2.48263e-09, No Iterations 0 ExecutionTime = 8.86 s ClockTime = 308 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.46813e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 451 | t 0.0045 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004500 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004500 was stored. Time = 0.00451 DICPBiCGStab: Solving for T, Initial residual = 3.08798e-05, Final residual = 2.42852e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.47831e-09, Final residual = 2.47831e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.47831e-09, Final residual = 2.47831e-09, No Iterations 0 ExecutionTime = 8.88 s ClockTime = 309 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.46317e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 452 | t 0.00451 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004510 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004510 was stored. Time = 0.00452 DICPBiCGStab: Solving for T, Initial residual = 3.08381e-05, Final residual = 2.42543e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.47457e-09, Final residual = 2.47457e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.47457e-09, Final residual = 2.47457e-09, No Iterations 0 ExecutionTime = 8.9 s ClockTime = 309 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.4588e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 453 | t 0.00452 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004520 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004520 was stored. Time = 0.00453 DICPBiCGStab: Solving for T, Initial residual = 3.08052e-05, Final residual = 2.42275e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.47145e-09, Final residual = 2.47145e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.47145e-09, Final residual = 2.47145e-09, No Iterations 0 ExecutionTime = 8.91 s ClockTime = 310 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.45466e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 454 | t 0.00453 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004530 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004530 was stored. Time = 0.00454 DICPBiCGStab: Solving for T, Initial residual = 3.07834e-05, Final residual = 2.42064e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.46798e-09, Final residual = 2.46798e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.46798e-09, Final residual = 2.46798e-09, No Iterations 0 ExecutionTime = 8.93 s ClockTime = 311 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.45144e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 455 | t 0.00454 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004540 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004540 was stored. Time = 0.00455 DICPBiCGStab: Solving for T, Initial residual = 3.07766e-05, Final residual = 2.41918e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.46466e-09, Final residual = 2.46466e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.46466e-09, Final residual = 2.46466e-09, No Iterations 0 ExecutionTime = 8.95 s ClockTime = 311 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.44922e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 456 | t 0.00455 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004550 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004550 was stored. Time = 0.00456 DICPBiCGStab: Solving for T, Initial residual = 3.07569e-05, Final residual = 2.41641e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.46055e-09, Final residual = 2.46055e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.46055e-09, Final residual = 2.46055e-09, No Iterations 0 ExecutionTime = 8.97 s ClockTime = 312 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.44674e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 457 | t 0.00456 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004560 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004560 was stored. Time = 0.00457 DICPBiCGStab: Solving for T, Initial residual = 3.072e-05, Final residual = 2.41274e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.4561e-09, Final residual = 2.4561e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.4561e-09, Final residual = 2.4561e-09, No Iterations 0 ExecutionTime = 8.98 s ClockTime = 312 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.44323e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 458 | t 0.00457 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004570 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004570 was stored. Time = 0.00458 DICPBiCGStab: Solving for T, Initial residual = 3.06608e-05, Final residual = 2.40765e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.45019e-09, Final residual = 2.45019e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.45019e-09, Final residual = 2.45019e-09, No Iterations 0 ExecutionTime = 9 s ClockTime = 313 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.4383e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 459 | t 0.00458 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004580 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004580 was stored. Time = 0.00459 DICPBiCGStab: Solving for T, Initial residual = 3.05945e-05, Final residual = 2.40169e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.44351e-09, Final residual = 2.44351e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.44351e-09, Final residual = 2.44351e-09, No Iterations 0 ExecutionTime = 9.01 s ClockTime = 314 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.43309e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 460 | t 0.00459 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004590 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004590 was stored. Time = 0.0046 DICPBiCGStab: Solving for T, Initial residual = 3.05231e-05, Final residual = 2.39488e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.43612e-09, Final residual = 2.43612e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.43612e-09, Final residual = 2.43612e-09, No Iterations 0 ExecutionTime = 9.03 s ClockTime = 314 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.42735e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 461 | t 0.0046 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004600 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004600 was stored. Time = 0.00461 DICPBiCGStab: Solving for T, Initial residual = 3.04716e-05, Final residual = 2.39091e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.43237e-09, Final residual = 2.43237e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.43237e-09, Final residual = 2.43237e-09, No Iterations 0 ExecutionTime = 9.04 s ClockTime = 315 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.42304e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 462 | t 0.00461 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004610 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004610 was stored. Time = 0.00462 DICPBiCGStab: Solving for T, Initial residual = 3.04208e-05, Final residual = 2.38793e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.43083e-09, Final residual = 2.43083e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.43083e-09, Final residual = 2.43083e-09, No Iterations 0 ExecutionTime = 9.06 s ClockTime = 316 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.41826e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 463 | t 0.00462 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004620 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004620 was stored. Time = 0.00463 DICPBiCGStab: Solving for T, Initial residual = 3.03521e-05, Final residual = 2.38371e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.42808e-09, Final residual = 2.42808e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.42808e-09, Final residual = 2.42808e-09, No Iterations 0 ExecutionTime = 9.07 s ClockTime = 316 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.41239e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 464 | t 0.00463 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004630 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004630 was stored. Time = 0.00464 DICPBiCGStab: Solving for T, Initial residual = 3.02785e-05, Final residual = 2.37892e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.42519e-09, Final residual = 2.42519e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.42519e-09, Final residual = 2.42519e-09, No Iterations 0 ExecutionTime = 9.09 s ClockTime = 317 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.40621e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 465 | t 0.00464 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004640 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004640 was stored. Time = 0.00465 DICPBiCGStab: Solving for T, Initial residual = 3.02132e-05, Final residual = 2.37437e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.42256e-09, Final residual = 2.42256e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.42256e-09, Final residual = 2.42256e-09, No Iterations 0 ExecutionTime = 9.11 s ClockTime = 318 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.40035e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 466 | t 0.00465 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004650 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004650 was stored. Time = 0.00466 DICPBiCGStab: Solving for T, Initial residual = 3.01703e-05, Final residual = 2.37225e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.44112e-09, Final residual = 2.44112e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.44112e-09, Final residual = 2.44112e-09, No Iterations 0 ExecutionTime = 9.13 s ClockTime = 318 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.39441e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 467 | t 0.00466 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004660 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004660 was stored. Time = 0.00467 DICPBiCGStab: Solving for T, Initial residual = 3.01134e-05, Final residual = 2.36804e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.44621e-09, Final residual = 2.44621e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.44621e-09, Final residual = 2.44621e-09, No Iterations 0 ExecutionTime = 9.14 s ClockTime = 319 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.38811e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 468 | t 0.00467 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004670 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004670 was stored. Time = 0.00468 DICPBiCGStab: Solving for T, Initial residual = 3.00622e-05, Final residual = 2.36539e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.4365e-09, Final residual = 2.4365e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.4365e-09, Final residual = 2.4365e-09, No Iterations 0 ExecutionTime = 9.16 s ClockTime = 320 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.38308e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 469 | t 0.00468 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004680 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004680 was stored. Time = 0.00469 DICPBiCGStab: Solving for T, Initial residual = 3.00016e-05, Final residual = 2.36212e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.44235e-09, Final residual = 2.44235e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.44235e-09, Final residual = 2.44235e-09, No Iterations 0 ExecutionTime = 9.17 s ClockTime = 320 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.37855e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 470 | t 0.00469 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004690 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004690 was stored. Time = 0.0047 DICPBiCGStab: Solving for T, Initial residual = 2.99266e-05, Final residual = 2.35706e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.43018e-09, Final residual = 2.43018e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.43018e-09, Final residual = 2.43018e-09, No Iterations 0 ExecutionTime = 9.19 s ClockTime = 321 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.37351e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 471 | t 0.0047 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004700 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004700 was stored. Time = 0.00471 DICPBiCGStab: Solving for T, Initial residual = 2.98518e-05, Final residual = 2.35159e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.42293e-09, Final residual = 2.42293e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.42293e-09, Final residual = 2.42293e-09, No Iterations 0 ExecutionTime = 9.21 s ClockTime = 322 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.36767e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 472 | t 0.00471 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004710 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004710 was stored. Time = 0.00472 DICPBiCGStab: Solving for T, Initial residual = 2.97699e-05, Final residual = 2.34524e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.41533e-09, Final residual = 2.41533e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.41533e-09, Final residual = 2.41533e-09, No Iterations 0 ExecutionTime = 9.22 s ClockTime = 322 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.36157e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 473 | t 0.00472 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004720 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004720 was stored. Time = 0.00473 DICPBiCGStab: Solving for T, Initial residual = 2.96905e-05, Final residual = 2.33867e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.40788e-09, Final residual = 2.40788e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.40788e-09, Final residual = 2.40788e-09, No Iterations 0 ExecutionTime = 9.24 s ClockTime = 323 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.35573e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 474 | t 0.00473 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004730 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004730 was stored. Time = 0.00474 DICPBiCGStab: Solving for T, Initial residual = 2.96164e-05, Final residual = 2.33252e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.40056e-09, Final residual = 2.40056e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.40056e-09, Final residual = 2.40056e-09, No Iterations 0 ExecutionTime = 9.25 s ClockTime = 323 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.3501e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 475 | t 0.00474 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004740 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004740 was stored. Time = 0.00475 DICPBiCGStab: Solving for T, Initial residual = 2.95548e-05, Final residual = 2.32851e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.43258e-09, Final residual = 2.43258e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.43258e-09, Final residual = 2.43258e-09, No Iterations 0 ExecutionTime = 9.27 s ClockTime = 324 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.34448e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 476 | t 0.00475 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004750 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004750 was stored. Time = 0.00476 DICPBiCGStab: Solving for T, Initial residual = 2.94962e-05, Final residual = 2.32363e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.39346e-09, Final residual = 2.39346e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.39346e-09, Final residual = 2.39346e-09, No Iterations 0 ExecutionTime = 9.28 s ClockTime = 325 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.33887e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 477 | t 0.00476 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004760 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004760 was stored. Time = 0.00477 DICPBiCGStab: Solving for T, Initial residual = 2.94268e-05, Final residual = 2.31769e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.39302e-09, Final residual = 2.39302e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.39302e-09, Final residual = 2.39302e-09, No Iterations 0 ExecutionTime = 9.3 s ClockTime = 325 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.33375e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 478 | t 0.00477 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004770 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004770 was stored. Time = 0.00478 DICPBiCGStab: Solving for T, Initial residual = 2.93603e-05, Final residual = 2.31156e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.38352e-09, Final residual = 2.38352e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.38352e-09, Final residual = 2.38352e-09, No Iterations 0 ExecutionTime = 9.32 s ClockTime = 326 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.32719e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 479 | t 0.00478 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004780 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004780 was stored. Time = 0.00479 DICPBiCGStab: Solving for T, Initial residual = 2.92886e-05, Final residual = 2.30491e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.3755e-09, Final residual = 2.3755e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.3755e-09, Final residual = 2.3755e-09, No Iterations 0 ExecutionTime = 9.33 s ClockTime = 327 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.32033e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 480 | t 0.00479 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004790 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004790 was stored. Time = 0.0048 DICPBiCGStab: Solving for T, Initial residual = 2.92149e-05, Final residual = 2.29806e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.36748e-09, Final residual = 2.36748e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.36748e-09, Final residual = 2.36748e-09, No Iterations 0 ExecutionTime = 9.34 s ClockTime = 327 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.31333e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 481 | t 0.0048 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004800 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004800 was stored. Time = 0.00481 DICPBiCGStab: Solving for T, Initial residual = 2.91473e-05, Final residual = 2.29261e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.36059e-09, Final residual = 2.36059e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.36059e-09, Final residual = 2.36059e-09, No Iterations 0 ExecutionTime = 9.36 s ClockTime = 328 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.30701e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 482 | t 0.00481 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004810 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004810 was stored. Time = 0.00482 DICPBiCGStab: Solving for T, Initial residual = 2.90724e-05, Final residual = 2.28673e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.35338e-09, Final residual = 2.35338e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.35338e-09, Final residual = 2.35338e-09, No Iterations 0 ExecutionTime = 9.38 s ClockTime = 329 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.30046e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 483 | t 0.00482 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004820 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004820 was stored. Time = 0.00483 DICPBiCGStab: Solving for T, Initial residual = 2.89989e-05, Final residual = 2.28064e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.34612e-09, Final residual = 2.34612e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.34612e-09, Final residual = 2.34612e-09, No Iterations 0 ExecutionTime = 9.39 s ClockTime = 329 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.29424e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 484 | t 0.00483 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004830 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004830 was stored. Time = 0.00484 DICPBiCGStab: Solving for T, Initial residual = 2.89186e-05, Final residual = 2.27419e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.33875e-09, Final residual = 2.33875e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.33875e-09, Final residual = 2.33875e-09, No Iterations 0 ExecutionTime = 9.41 s ClockTime = 330 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.28791e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 485 | t 0.00484 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004840 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004840 was stored. Time = 0.00485 DICPBiCGStab: Solving for T, Initial residual = 2.88327e-05, Final residual = 2.26725e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.33079e-09, Final residual = 2.33079e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.33079e-09, Final residual = 2.33079e-09, No Iterations 0 ExecutionTime = 9.42 s ClockTime = 330 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.28125e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 486 | t 0.00485 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004850 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004850 was stored. Time = 0.00486 DICPBiCGStab: Solving for T, Initial residual = 2.87483e-05, Final residual = 2.26078e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.32136e-09, Final residual = 2.32136e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.32136e-09, Final residual = 2.32136e-09, No Iterations 0 ExecutionTime = 9.45 s ClockTime = 331 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.27407e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 487 | t 0.00486 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004860 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004860 was stored. Time = 0.00487 DICPBiCGStab: Solving for T, Initial residual = 2.86533e-05, Final residual = 2.25293e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.31979e-09, Final residual = 2.31979e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.31979e-09, Final residual = 2.31979e-09, No Iterations 0 ExecutionTime = 9.47 s ClockTime = 332 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.26645e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 488 | t 0.00487 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004870 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004870 was stored. Time = 0.00488 DICPBiCGStab: Solving for T, Initial residual = 2.85667e-05, Final residual = 2.24565e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.30845e-09, Final residual = 2.30845e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.30845e-09, Final residual = 2.30845e-09, No Iterations 0 ExecutionTime = 9.49 s ClockTime = 332 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.25913e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 489 | t 0.00488 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004880 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004880 was stored. Time = 0.00489 DICPBiCGStab: Solving for T, Initial residual = 2.84913e-05, Final residual = 2.23885e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.30063e-09, Final residual = 2.30063e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.30063e-09, Final residual = 2.30063e-09, No Iterations 0 ExecutionTime = 9.5 s ClockTime = 333 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.25246e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 490 | t 0.00489 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004890 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004890 was stored. Time = 0.0049 DICPBiCGStab: Solving for T, Initial residual = 2.84048e-05, Final residual = 2.23321e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.2938e-09, Final residual = 2.2938e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.2938e-09, Final residual = 2.2938e-09, No Iterations 0 ExecutionTime = 9.52 s ClockTime = 334 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.24463e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 491 | t 0.0049 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004900 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004900 was stored. Time = 0.00491 DICPBiCGStab: Solving for T, Initial residual = 2.82948e-05, Final residual = 2.22711e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.28669e-09, Final residual = 2.28669e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.28669e-09, Final residual = 2.28669e-09, No Iterations 0 ExecutionTime = 9.53 s ClockTime = 334 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.23536e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 492 | t 0.00491 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004910 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004910 was stored. Time = 0.00492 DICPBiCGStab: Solving for T, Initial residual = 2.81719e-05, Final residual = 2.21977e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.27834e-09, Final residual = 2.27834e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.27834e-09, Final residual = 2.27834e-09, No Iterations 0 ExecutionTime = 9.55 s ClockTime = 335 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.22574e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 493 | t 0.00492 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004920 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004920 was stored. Time = 0.00493 DICPBiCGStab: Solving for T, Initial residual = 2.80563e-05, Final residual = 2.2127e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.27014e-09, Final residual = 2.27014e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.27014e-09, Final residual = 2.27014e-09, No Iterations 0 ExecutionTime = 9.56 s ClockTime = 335 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.217e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 494 | t 0.00493 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004930 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004930 was stored. Time = 0.00494 DICPBiCGStab: Solving for T, Initial residual = 2.79403e-05, Final residual = 2.20545e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.262e-09, Final residual = 2.262e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.262e-09, Final residual = 2.262e-09, No Iterations 0 ExecutionTime = 9.58 s ClockTime = 336 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.20805e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 495 | t 0.00494 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004940 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004940 was stored. Time = 0.00495 DICPBiCGStab: Solving for T, Initial residual = 2.78148e-05, Final residual = 2.19693e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.25286e-09, Final residual = 2.25286e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.25286e-09, Final residual = 2.25286e-09, No Iterations 0 ExecutionTime = 9.6 s ClockTime = 337 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.19873e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 496 | t 0.00495 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004950 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004950 was stored. Time = 0.00496 DICPBiCGStab: Solving for T, Initial residual = 2.76897e-05, Final residual = 2.18857e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.24383e-09, Final residual = 2.24383e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.24383e-09, Final residual = 2.24383e-09, No Iterations 0 ExecutionTime = 9.61 s ClockTime = 337 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.18899e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 497 | t 0.00496 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004960 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004960 was stored. Time = 0.00497 DICPBiCGStab: Solving for T, Initial residual = 2.75611e-05, Final residual = 2.18143e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.23596e-09, Final residual = 2.23596e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.23596e-09, Final residual = 2.23596e-09, No Iterations 0 ExecutionTime = 9.62 s ClockTime = 338 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.17914e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 498 | t 0.00497 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004970 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004970 was stored. Time = 0.00498 DICPBiCGStab: Solving for T, Initial residual = 2.74313e-05, Final residual = 2.17546e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.22943e-09, Final residual = 2.22943e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.22943e-09, Final residual = 2.22943e-09, No Iterations 0 ExecutionTime = 9.64 s ClockTime = 339 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.1696e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 499 | t 0.00498 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004980 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004980 was stored. Time = 0.00499 DICPBiCGStab: Solving for T, Initial residual = 2.73034e-05, Final residual = 2.16874e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.22215e-09, Final residual = 2.22215e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.22215e-09, Final residual = 2.22215e-09, No Iterations 0 ExecutionTime = 9.66 s ClockTime = 339 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.1602e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 500 | t 0.00499 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.004990 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.004990 was stored. Time = 0.005 DICPBiCGStab: Solving for T, Initial residual = 2.71711e-05, Final residual = 2.1615e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.21436e-09, Final residual = 2.21436e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.21436e-09, Final residual = 2.21436e-09, No Iterations 0 ExecutionTime = 9.76 s ClockTime = 340 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.15041e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 501 | t 0.005 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005000 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005000 was stored. ---[preciceAdapter] The coupling timestep completed. Writing the updated results. Time = 0.00501 DICPBiCGStab: Solving for T, Initial residual = 2.70473e-05, Final residual = 2.15554e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.20811e-09, Final residual = 2.20811e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.20811e-09, Final residual = 2.20811e-09, No Iterations 0 ExecutionTime = 9.79 s ClockTime = 342 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.1408e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 502 | t 0.00501 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005010 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005010 was stored. Time = 0.00502 DICPBiCGStab: Solving for T, Initial residual = 2.69331e-05, Final residual = 2.15106e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.2035e-09, Final residual = 2.2035e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.2035e-09, Final residual = 2.2035e-09, No Iterations 0 ExecutionTime = 9.81 s ClockTime = 342 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.13196e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 503 | t 0.00502 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005020 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005020 was stored. Time = 0.00503 DICPBiCGStab: Solving for T, Initial residual = 2.68336e-05, Final residual = 2.14756e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.19974e-09, Final residual = 2.19974e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.19974e-09, Final residual = 2.19974e-09, No Iterations 0 ExecutionTime = 9.83 s ClockTime = 343 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.12345e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 504 | t 0.00503 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005030 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005030 was stored. Time = 0.00504 DICPBiCGStab: Solving for T, Initial residual = 2.67148e-05, Final residual = 2.14268e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.19454e-09, Final residual = 2.19454e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.19454e-09, Final residual = 2.19454e-09, No Iterations 0 ExecutionTime = 9.84 s ClockTime = 343 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.11336e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 505 | t 0.00504 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005040 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005040 was stored. Time = 0.00505 DICPBiCGStab: Solving for T, Initial residual = 2.65807e-05, Final residual = 2.13694e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.18835e-09, Final residual = 2.18835e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.18835e-09, Final residual = 2.18835e-09, No Iterations 0 ExecutionTime = 9.86 s ClockTime = 344 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.10208e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 506 | t 0.00505 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005050 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005050 was stored. Time = 0.00506 DICPBiCGStab: Solving for T, Initial residual = 2.64514e-05, Final residual = 2.13124e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.18244e-09, Final residual = 2.18244e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.18244e-09, Final residual = 2.18244e-09, No Iterations 0 ExecutionTime = 9.87 s ClockTime = 345 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.09156e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 507 | t 0.00506 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005060 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005060 was stored. Time = 0.00507 DICPBiCGStab: Solving for T, Initial residual = 2.63484e-05, Final residual = 2.12728e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.17837e-09, Final residual = 2.17837e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.17837e-09, Final residual = 2.17837e-09, No Iterations 0 ExecutionTime = 9.88 s ClockTime = 345 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.08252e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 508 | t 0.00507 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005070 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005070 was stored. Time = 0.00508 DICPBiCGStab: Solving for T, Initial residual = 2.6245e-05, Final residual = 2.12377e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.17443e-09, Final residual = 2.17443e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.17443e-09, Final residual = 2.17443e-09, No Iterations 0 ExecutionTime = 9.9 s ClockTime = 346 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.07249e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 509 | t 0.00508 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005080 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005080 was stored. Time = 0.00509 DICPBiCGStab: Solving for T, Initial residual = 2.61302e-05, Final residual = 2.11928e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.16957e-09, Final residual = 2.16957e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.16957e-09, Final residual = 2.16957e-09, No Iterations 0 ExecutionTime = 9.92 s ClockTime = 347 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.06211e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 510 | t 0.00509 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005090 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005090 was stored. Time = 0.0051 DICPBiCGStab: Solving for T, Initial residual = 2.60326e-05, Final residual = 2.11595e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.1659e-09, Final residual = 2.1659e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.1659e-09, Final residual = 2.1659e-09, No Iterations 0 ExecutionTime = 9.94 s ClockTime = 347 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.05187e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 511 | t 0.0051 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005100 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005100 was stored. Time = 0.00511 DICPBiCGStab: Solving for T, Initial residual = 2.59463e-05, Final residual = 2.11268e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.16233e-09, Final residual = 2.16233e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.16233e-09, Final residual = 2.16233e-09, No Iterations 0 ExecutionTime = 9.96 s ClockTime = 348 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.0422e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 512 | t 0.00511 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005110 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005110 was stored. Time = 0.00512 DICPBiCGStab: Solving for T, Initial residual = 2.58512e-05, Final residual = 2.10867e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.1581e-09, Final residual = 2.1581e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.1581e-09, Final residual = 2.1581e-09, No Iterations 0 ExecutionTime = 9.97 s ClockTime = 349 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.03266e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 513 | t 0.00512 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005120 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005120 was stored. Time = 0.00513 DICPBiCGStab: Solving for T, Initial residual = 2.57523e-05, Final residual = 2.10422e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.15339e-09, Final residual = 2.15339e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.15339e-09, Final residual = 2.15339e-09, No Iterations 0 ExecutionTime = 9.98 s ClockTime = 349 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.02276e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 514 | t 0.00513 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005130 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005130 was stored. Time = 0.00514 DICPBiCGStab: Solving for T, Initial residual = 2.56503e-05, Final residual = 2.09981e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.14859e-09, Final residual = 2.14859e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.14859e-09, Final residual = 2.14859e-09, No Iterations 0 ExecutionTime = 10 s ClockTime = 350 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.01207e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 515 | t 0.00514 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005140 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005140 was stored. Time = 0.00515 DICPBiCGStab: Solving for T, Initial residual = 2.55449e-05, Final residual = 2.09517e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.1433e-09, Final residual = 2.1433e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.1433e-09, Final residual = 2.1433e-09, No Iterations 0 ExecutionTime = 10.02 s ClockTime = 350 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.00103e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 516 | t 0.00515 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005150 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005150 was stored. Time = 0.00516 DICPBiCGStab: Solving for T, Initial residual = 2.54569e-05, Final residual = 2.09154e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.13891e-09, Final residual = 2.13891e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.13891e-09, Final residual = 2.13891e-09, No Iterations 0 ExecutionTime = 10.04 s ClockTime = 351 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.99051e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 517 | t 0.00516 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005160 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005160 was stored. Time = 0.00517 DICPBiCGStab: Solving for T, Initial residual = 2.5388e-05, Final residual = 2.0889e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.13558e-09, Final residual = 2.13558e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.13558e-09, Final residual = 2.13558e-09, No Iterations 0 ExecutionTime = 10.05 s ClockTime = 352 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.98065e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 518 | t 0.00517 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005170 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005170 was stored. Time = 0.00518 DICPBiCGStab: Solving for T, Initial residual = 2.53325e-05, Final residual = 2.08592e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.13213e-09, Final residual = 2.13213e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.13213e-09, Final residual = 2.13213e-09, No Iterations 0 ExecutionTime = 10.07 s ClockTime = 352 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.97155e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 519 | t 0.00518 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005180 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005180 was stored. Time = 0.00519 DICPBiCGStab: Solving for T, Initial residual = 2.52709e-05, Final residual = 2.08273e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.12854e-09, Final residual = 2.12854e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.12854e-09, Final residual = 2.12854e-09, No Iterations 0 ExecutionTime = 10.09 s ClockTime = 353 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.96218e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 520 | t 0.00519 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005190 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005190 was stored. Time = 0.0052 DICPBiCGStab: Solving for T, Initial residual = 2.5207e-05, Final residual = 2.07959e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.12506e-09, Final residual = 2.12506e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.12506e-09, Final residual = 2.12506e-09, No Iterations 0 ExecutionTime = 10.1 s ClockTime = 354 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.95239e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 521 | t 0.0052 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005200 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005200 was stored. Time = 0.00521 DICPBiCGStab: Solving for T, Initial residual = 2.51753e-05, Final residual = 2.07936e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.12442e-09, Final residual = 2.12442e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.12442e-09, Final residual = 2.12442e-09, No Iterations 0 ExecutionTime = 10.13 s ClockTime = 354 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.94388e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 522 | t 0.00521 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005210 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005210 was stored. Time = 0.00522 DICPBiCGStab: Solving for T, Initial residual = 2.51643e-05, Final residual = 2.08187e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.12632e-09, Final residual = 2.12632e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.12632e-09, Final residual = 2.12632e-09, No Iterations 0 ExecutionTime = 10.14 s ClockTime = 355 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.93608e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 523 | t 0.00522 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005220 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005220 was stored. Time = 0.00523 DICPBiCGStab: Solving for T, Initial residual = 2.51347e-05, Final residual = 2.08399e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.1277e-09, Final residual = 2.1277e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.1277e-09, Final residual = 2.1277e-09, No Iterations 0 ExecutionTime = 10.15 s ClockTime = 356 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.92775e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 524 | t 0.00523 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005230 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005230 was stored. Time = 0.00524 DICPBiCGStab: Solving for T, Initial residual = 2.50971e-05, Final residual = 2.08605e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.12896e-09, Final residual = 2.12896e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.12896e-09, Final residual = 2.12896e-09, No Iterations 0 ExecutionTime = 10.17 s ClockTime = 356 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.91903e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 525 | t 0.00524 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005240 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005240 was stored. Time = 0.00525 DICPBiCGStab: Solving for T, Initial residual = 2.50653e-05, Final residual = 2.08903e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.13109e-09, Final residual = 2.13109e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.13109e-09, Final residual = 2.13109e-09, No Iterations 0 ExecutionTime = 10.19 s ClockTime = 357 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.91044e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 526 | t 0.00525 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005250 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005250 was stored. Time = 0.00526 DICPBiCGStab: Solving for T, Initial residual = 2.50441e-05, Final residual = 2.09256e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.13382e-09, Final residual = 2.13382e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.13382e-09, Final residual = 2.13382e-09, No Iterations 0 ExecutionTime = 10.2 s ClockTime = 358 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.90222e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 527 | t 0.00526 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005260 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005260 was stored. Time = 0.00527 DICPBiCGStab: Solving for T, Initial residual = 2.50664e-05, Final residual = 2.09855e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.13901e-09, Final residual = 2.13901e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.13901e-09, Final residual = 2.13901e-09, No Iterations 0 ExecutionTime = 10.21 s ClockTime = 358 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.89611e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 528 | t 0.00527 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005270 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005270 was stored. Time = 0.00528 DICPBiCGStab: Solving for T, Initial residual = 2.50949e-05, Final residual = 2.1046e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.14413e-09, Final residual = 2.14413e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.14413e-09, Final residual = 2.14413e-09, No Iterations 0 ExecutionTime = 10.24 s ClockTime = 359 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.89086e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 529 | t 0.00528 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005280 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005280 was stored. Time = 0.00529 DICPBiCGStab: Solving for T, Initial residual = 2.51113e-05, Final residual = 2.10947e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.14805e-09, Final residual = 2.14805e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.14805e-09, Final residual = 2.14805e-09, No Iterations 0 ExecutionTime = 10.25 s ClockTime = 360 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.88416e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 530 | t 0.00529 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005290 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005290 was stored. Time = 0.0053 DICPBiCGStab: Solving for T, Initial residual = 2.51356e-05, Final residual = 2.11499e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.15274e-09, Final residual = 2.15274e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.15274e-09, Final residual = 2.15274e-09, No Iterations 0 ExecutionTime = 10.27 s ClockTime = 360 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.87805e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 531 | t 0.0053 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005300 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005300 was stored. Time = 0.00531 DICPBiCGStab: Solving for T, Initial residual = 2.51729e-05, Final residual = 2.12053e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.15759e-09, Final residual = 2.15759e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.15759e-09, Final residual = 2.15759e-09, No Iterations 0 ExecutionTime = 10.28 s ClockTime = 361 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.87255e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 532 | t 0.00531 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005310 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005310 was stored. Time = 0.00532 DICPBiCGStab: Solving for T, Initial residual = 2.52251e-05, Final residual = 2.12646e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.16256e-09, Final residual = 2.16256e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.16256e-09, Final residual = 2.16256e-09, No Iterations 0 ExecutionTime = 10.3 s ClockTime = 361 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.8674e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 533 | t 0.00532 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005320 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005320 was stored. Time = 0.00533 DICPBiCGStab: Solving for T, Initial residual = 2.53068e-05, Final residual = 2.13406e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.16941e-09, Final residual = 2.16941e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.16941e-09, Final residual = 2.16941e-09, No Iterations 0 ExecutionTime = 10.31 s ClockTime = 362 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.8637e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 534 | t 0.00533 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005330 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005330 was stored. Time = 0.00534 DICPBiCGStab: Solving for T, Initial residual = 2.54103e-05, Final residual = 2.14269e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.20469e-09, Final residual = 2.20469e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.20469e-09, Final residual = 2.20469e-09, No Iterations 0 ExecutionTime = 10.33 s ClockTime = 363 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.86079e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 535 | t 0.00534 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005340 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005340 was stored. Time = 0.00535 DICPBiCGStab: Solving for T, Initial residual = 2.55215e-05, Final residual = 2.15114e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.21034e-09, Final residual = 2.21034e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.21034e-09, Final residual = 2.21034e-09, No Iterations 0 ExecutionTime = 10.34 s ClockTime = 363 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.85914e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 536 | t 0.00535 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005350 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005350 was stored. Time = 0.00536 DICPBiCGStab: Solving for T, Initial residual = 2.56453e-05, Final residual = 2.1603e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.22173e-09, Final residual = 2.22173e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.22173e-09, Final residual = 2.22173e-09, No Iterations 0 ExecutionTime = 10.36 s ClockTime = 364 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.85832e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 537 | t 0.00536 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005360 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005360 was stored. Time = 0.00537 DICPBiCGStab: Solving for T, Initial residual = 2.57582e-05, Final residual = 2.16791e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.22649e-09, Final residual = 2.22649e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.22649e-09, Final residual = 2.22649e-09, No Iterations 0 ExecutionTime = 10.38 s ClockTime = 365 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.85714e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 538 | t 0.00537 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005370 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005370 was stored. Time = 0.00538 DICPBiCGStab: Solving for T, Initial residual = 2.58731e-05, Final residual = 2.17607e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.2337e-09, Final residual = 2.2337e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.2337e-09, Final residual = 2.2337e-09, No Iterations 0 ExecutionTime = 10.4 s ClockTime = 365 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.85626e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 539 | t 0.00538 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005380 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005380 was stored. Time = 0.00539 DICPBiCGStab: Solving for T, Initial residual = 2.60175e-05, Final residual = 2.18556e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.24215e-09, Final residual = 2.24215e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.24215e-09, Final residual = 2.24215e-09, No Iterations 0 ExecutionTime = 10.41 s ClockTime = 366 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.85722e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 540 | t 0.00539 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005390 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005390 was stored. Time = 0.0054 DICPBiCGStab: Solving for T, Initial residual = 2.61755e-05, Final residual = 2.1956e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.25116e-09, Final residual = 2.25116e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.25116e-09, Final residual = 2.25116e-09, No Iterations 0 ExecutionTime = 10.43 s ClockTime = 366 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.85981e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 541 | t 0.0054 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005400 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005400 was stored. Time = 0.00541 DICPBiCGStab: Solving for T, Initial residual = 2.63356e-05, Final residual = 2.20618e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.26074e-09, Final residual = 2.26074e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.26074e-09, Final residual = 2.26074e-09, No Iterations 0 ExecutionTime = 10.44 s ClockTime = 367 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.86223e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 542 | t 0.00541 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005410 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005410 was stored. Time = 0.00542 DICPBiCGStab: Solving for T, Initial residual = 2.65408e-05, Final residual = 2.22104e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.2746e-09, Final residual = 2.2746e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.2746e-09, Final residual = 2.2746e-09, No Iterations 0 ExecutionTime = 10.46 s ClockTime = 368 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.86776e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 543 | t 0.00542 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005420 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005420 was stored. Time = 0.00543 DICPBiCGStab: Solving for T, Initial residual = 2.67509e-05, Final residual = 2.23767e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.29022e-09, Final residual = 2.29022e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.29022e-09, Final residual = 2.29022e-09, No Iterations 0 ExecutionTime = 10.47 s ClockTime = 368 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.87364e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 544 | t 0.00543 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005430 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005430 was stored. Time = 0.00544 DICPBiCGStab: Solving for T, Initial residual = 2.69478e-05, Final residual = 2.25316e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.30469e-09, Final residual = 2.30469e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.30469e-09, Final residual = 2.30469e-09, No Iterations 0 ExecutionTime = 10.49 s ClockTime = 369 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.87959e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 545 | t 0.00544 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005440 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005440 was stored. Time = 0.00545 DICPBiCGStab: Solving for T, Initial residual = 2.71337e-05, Final residual = 2.26797e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.31859e-09, Final residual = 2.31859e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.31859e-09, Final residual = 2.31859e-09, No Iterations 0 ExecutionTime = 10.5 s ClockTime = 370 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.8859e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 546 | t 0.00545 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005450 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005450 was stored. Time = 0.00546 DICPBiCGStab: Solving for T, Initial residual = 2.73212e-05, Final residual = 2.28267e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.33227e-09, Final residual = 2.33227e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.33227e-09, Final residual = 2.33227e-09, No Iterations 0 ExecutionTime = 10.52 s ClockTime = 370 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.89362e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 547 | t 0.00546 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005460 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005460 was stored. Time = 0.00547 DICPBiCGStab: Solving for T, Initial residual = 2.75532e-05, Final residual = 2.29978e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.34634e-09, Final residual = 2.34634e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.34634e-09, Final residual = 2.34634e-09, No Iterations 0 ExecutionTime = 10.54 s ClockTime = 371 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.90358e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 548 | t 0.00547 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005470 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005470 was stored. Time = 0.00548 DICPBiCGStab: Solving for T, Initial residual = 2.78109e-05, Final residual = 2.31883e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.36895e-09, Final residual = 2.36895e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.36895e-09, Final residual = 2.36895e-09, No Iterations 0 ExecutionTime = 10.55 s ClockTime = 372 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.91572e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 549 | t 0.00548 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005480 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005480 was stored. Time = 0.00549 DICPBiCGStab: Solving for T, Initial residual = 2.80639e-05, Final residual = 2.33784e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.38608e-09, Final residual = 2.38608e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.38608e-09, Final residual = 2.38608e-09, No Iterations 0 ExecutionTime = 10.56 s ClockTime = 372 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.92904e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 550 | t 0.00549 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005490 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005490 was stored. Time = 0.0055 DICPBiCGStab: Solving for T, Initial residual = 2.83284e-05, Final residual = 2.35747e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.40485e-09, Final residual = 2.40485e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.40485e-09, Final residual = 2.40485e-09, No Iterations 0 ExecutionTime = 10.58 s ClockTime = 373 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.9441e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 551 | t 0.0055 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005500 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005500 was stored. Time = 0.00551 DICPBiCGStab: Solving for T, Initial residual = 2.86017e-05, Final residual = 2.37865e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.42453e-09, Final residual = 2.42453e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.42453e-09, Final residual = 2.42453e-09, No Iterations 0 ExecutionTime = 10.6 s ClockTime = 373 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.96141e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 552 | t 0.00551 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005510 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005510 was stored. Time = 0.00552 DICPBiCGStab: Solving for T, Initial residual = 2.88851e-05, Final residual = 2.40111e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.44739e-09, Final residual = 2.44739e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.44739e-09, Final residual = 2.44739e-09, No Iterations 0 ExecutionTime = 10.61 s ClockTime = 374 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.98014e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 553 | t 0.00552 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005520 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005520 was stored. Time = 0.00553 DICPBiCGStab: Solving for T, Initial residual = 2.91685e-05, Final residual = 2.42415e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.46921e-09, Final residual = 2.46921e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.46921e-09, Final residual = 2.46921e-09, No Iterations 0 ExecutionTime = 10.63 s ClockTime = 375 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.00045e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 554 | t 0.00553 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005530 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005530 was stored. Time = 0.00554 DICPBiCGStab: Solving for T, Initial residual = 2.95007e-05, Final residual = 2.45014e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.4944e-09, Final residual = 2.4944e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.4944e-09, Final residual = 2.4944e-09, No Iterations 0 ExecutionTime = 10.65 s ClockTime = 375 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.02409e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 555 | t 0.00554 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005540 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005540 was stored. Time = 0.00555 DICPBiCGStab: Solving for T, Initial residual = 2.98411e-05, Final residual = 2.47664e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.52e-09, Final residual = 2.52e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.52e-09, Final residual = 2.52e-09, No Iterations 0 ExecutionTime = 10.67 s ClockTime = 376 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.04982e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 556 | t 0.00555 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005550 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005550 was stored. Time = 0.00556 DICPBiCGStab: Solving for T, Initial residual = 3.01728e-05, Final residual = 2.5031e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.54562e-09, Final residual = 2.54562e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.54562e-09, Final residual = 2.54562e-09, No Iterations 0 ExecutionTime = 10.68 s ClockTime = 377 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.07658e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 557 | t 0.00556 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005560 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005560 was stored. Time = 0.00557 DICPBiCGStab: Solving for T, Initial residual = 3.04954e-05, Final residual = 2.52885e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.57054e-09, Final residual = 2.57054e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.57054e-09, Final residual = 2.57054e-09, No Iterations 0 ExecutionTime = 10.7 s ClockTime = 377 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.10467e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 558 | t 0.00557 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005570 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005570 was stored. Time = 0.00558 DICPBiCGStab: Solving for T, Initial residual = 3.08404e-05, Final residual = 2.55768e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.5986e-09, Final residual = 2.5986e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.5986e-09, Final residual = 2.5986e-09, No Iterations 0 ExecutionTime = 10.71 s ClockTime = 378 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.13554e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 559 | t 0.00558 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005580 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005580 was stored. Time = 0.00559 DICPBiCGStab: Solving for T, Initial residual = 3.12136e-05, Final residual = 2.58834e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.62841e-09, Final residual = 2.62841e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.62841e-09, Final residual = 2.62841e-09, No Iterations 0 ExecutionTime = 10.73 s ClockTime = 378 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.16993e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 560 | t 0.00559 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005590 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005590 was stored. Time = 0.0056 DICPBiCGStab: Solving for T, Initial residual = 3.1597e-05, Final residual = 2.61951e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.65885e-09, Final residual = 2.65885e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.65885e-09, Final residual = 2.65885e-09, No Iterations 0 ExecutionTime = 10.74 s ClockTime = 379 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.20678e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 561 | t 0.0056 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005600 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005600 was stored. Time = 0.00561 DICPBiCGStab: Solving for T, Initial residual = 3.20019e-05, Final residual = 2.65328e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.69184e-09, Final residual = 2.69184e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.69184e-09, Final residual = 2.69184e-09, No Iterations 0 ExecutionTime = 10.76 s ClockTime = 380 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.24671e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 562 | t 0.00561 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005610 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005610 was stored. Time = 0.00562 DICPBiCGStab: Solving for T, Initial residual = 3.24235e-05, Final residual = 2.68867e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.72649e-09, Final residual = 2.72649e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.72649e-09, Final residual = 2.72649e-09, No Iterations 0 ExecutionTime = 10.77 s ClockTime = 380 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.28971e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 563 | t 0.00562 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005620 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005620 was stored. Time = 0.00563 DICPBiCGStab: Solving for T, Initial residual = 3.29023e-05, Final residual = 2.72947e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.76653e-09, Final residual = 2.76653e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.76653e-09, Final residual = 2.76653e-09, No Iterations 0 ExecutionTime = 10.78 s ClockTime = 381 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.33674e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 564 | t 0.00563 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005630 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005630 was stored. Time = 0.00564 DICPBiCGStab: Solving for T, Initial residual = 3.33942e-05, Final residual = 2.77106e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.80748e-09, Final residual = 2.80748e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.80748e-09, Final residual = 2.80748e-09, No Iterations 0 ExecutionTime = 10.8 s ClockTime = 382 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.38749e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 565 | t 0.00564 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005640 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005640 was stored. Time = 0.00565 DICPBiCGStab: Solving for T, Initial residual = 3.38904e-05, Final residual = 2.81189e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.84757e-09, Final residual = 2.84757e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.84757e-09, Final residual = 2.84757e-09, No Iterations 0 ExecutionTime = 10.82 s ClockTime = 382 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.44084e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 566 | t 0.00565 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005650 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005650 was stored. Time = 0.00566 DICPBiCGStab: Solving for T, Initial residual = 3.43976e-05, Final residual = 2.85309e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.88812e-09, Final residual = 2.88812e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.88812e-09, Final residual = 2.88812e-09, No Iterations 0 ExecutionTime = 10.83 s ClockTime = 383 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.49657e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 567 | t 0.00566 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005660 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005660 was stored. Time = 0.00567 DICPBiCGStab: Solving for T, Initial residual = 3.49309e-05, Final residual = 2.89568e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.93008e-09, Final residual = 2.93008e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.93008e-09, Final residual = 2.93008e-09, No Iterations 0 ExecutionTime = 10.85 s ClockTime = 383 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.55578e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 568 | t 0.00567 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005670 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005670 was stored. Time = 0.00568 DICPBiCGStab: Solving for T, Initial residual = 3.55177e-05, Final residual = 2.94117e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 2.97491e-09, Final residual = 2.97491e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 2.97491e-09, Final residual = 2.97491e-09, No Iterations 0 ExecutionTime = 10.86 s ClockTime = 384 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.61789e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 569 | t 0.00568 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005680 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005680 was stored. Time = 0.00569 DICPBiCGStab: Solving for T, Initial residual = 3.61206e-05, Final residual = 2.98727e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.02028e-09, Final residual = 3.02028e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.02028e-09, Final residual = 3.02028e-09, No Iterations 0 ExecutionTime = 10.88 s ClockTime = 385 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.68346e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 570 | t 0.00569 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005690 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005690 was stored. Time = 0.0057 DICPBiCGStab: Solving for T, Initial residual = 3.67164e-05, Final residual = 3.03537e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.06765e-09, Final residual = 3.06765e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.06765e-09, Final residual = 3.06765e-09, No Iterations 0 ExecutionTime = 10.9 s ClockTime = 385 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.75264e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 571 | t 0.0057 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005700 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005700 was stored. Time = 0.00571 DICPBiCGStab: Solving for T, Initial residual = 3.72976e-05, Final residual = 3.08306e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.11466e-09, Final residual = 3.11466e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.11466e-09, Final residual = 3.11466e-09, No Iterations 0 ExecutionTime = 10.92 s ClockTime = 386 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.82268e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 572 | t 0.00571 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005710 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005710 was stored. Time = 0.00572 DICPBiCGStab: Solving for T, Initial residual = 3.79084e-05, Final residual = 3.13304e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.16381e-09, Final residual = 3.16381e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.16381e-09, Final residual = 3.16381e-09, No Iterations 0 ExecutionTime = 10.93 s ClockTime = 387 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.89616e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 573 | t 0.00572 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005720 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005720 was stored. Time = 0.00573 DICPBiCGStab: Solving for T, Initial residual = 3.85742e-05, Final residual = 3.18627e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.21624e-09, Final residual = 3.21624e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.21624e-09, Final residual = 3.21624e-09, No Iterations 0 ExecutionTime = 10.95 s ClockTime = 387 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.97483e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 574 | t 0.00573 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005730 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005730 was stored. Time = 0.00574 DICPBiCGStab: Solving for T, Initial residual = 3.92581e-05, Final residual = 3.23954e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.26184e-09, Final residual = 3.26184e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.26184e-09, Final residual = 3.26184e-09, No Iterations 0 ExecutionTime = 10.97 s ClockTime = 388 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 4.05661e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 575 | t 0.00574 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005740 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005740 was stored. Time = 0.00575 DICPBiCGStab: Solving for T, Initial residual = 4.00023e-05, Final residual = 3.2966e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.32963e-09, Final residual = 3.32963e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.32963e-09, Final residual = 3.32963e-09, No Iterations 0 ExecutionTime = 10.99 s ClockTime = 389 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 4.14362e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 576 | t 0.00575 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005750 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005750 was stored. Time = 0.00576 DICPBiCGStab: Solving for T, Initial residual = 4.07672e-05, Final residual = 3.35427e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.38345e-09, Final residual = 3.38345e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.38345e-09, Final residual = 3.38345e-09, No Iterations 0 ExecutionTime = 11.01 s ClockTime = 389 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 4.23567e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 577 | t 0.00576 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005760 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005760 was stored. Time = 0.00577 DICPBiCGStab: Solving for T, Initial residual = 4.1564e-05, Final residual = 3.41272e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.44136e-09, Final residual = 3.44136e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.44136e-09, Final residual = 3.44136e-09, No Iterations 0 ExecutionTime = 11.02 s ClockTime = 390 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 4.33157e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 578 | t 0.00577 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005770 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005770 was stored. Time = 0.00578 DICPBiCGStab: Solving for T, Initial residual = 4.2372e-05, Final residual = 3.47122e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.49907e-09, Final residual = 3.49907e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.49907e-09, Final residual = 3.49907e-09, No Iterations 0 ExecutionTime = 11.04 s ClockTime = 391 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 4.42985e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 579 | t 0.00578 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005780 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005780 was stored. Time = 0.00579 DICPBiCGStab: Solving for T, Initial residual = 4.32165e-05, Final residual = 3.53129e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.55865e-09, Final residual = 3.55865e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.55865e-09, Final residual = 3.55865e-09, No Iterations 0 ExecutionTime = 11.05 s ClockTime = 391 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 4.53226e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 580 | t 0.00579 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005790 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005790 was stored. Time = 0.0058 DICPBiCGStab: Solving for T, Initial residual = 4.40829e-05, Final residual = 3.59133e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.61806e-09, Final residual = 3.61806e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.61806e-09, Final residual = 3.61806e-09, No Iterations 0 ExecutionTime = 11.07 s ClockTime = 392 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 4.63603e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 581 | t 0.0058 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005800 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005800 was stored. Time = 0.00581 DICPBiCGStab: Solving for T, Initial residual = 4.50211e-05, Final residual = 3.65673e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.68282e-09, Final residual = 3.68282e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.68282e-09, Final residual = 3.68282e-09, No Iterations 0 ExecutionTime = 11.08 s ClockTime = 392 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 4.74576e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 582 | t 0.00581 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005810 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005810 was stored. Time = 0.00582 DICPBiCGStab: Solving for T, Initial residual = 4.59667e-05, Final residual = 3.72196e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.74741e-09, Final residual = 3.74741e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.74741e-09, Final residual = 3.74741e-09, No Iterations 0 ExecutionTime = 11.1 s ClockTime = 393 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 4.85969e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 583 | t 0.00582 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005820 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005820 was stored. Time = 0.00583 DICPBiCGStab: Solving for T, Initial residual = 4.69195e-05, Final residual = 3.78767e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.81245e-09, Final residual = 3.81245e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.81245e-09, Final residual = 3.81245e-09, No Iterations 0 ExecutionTime = 11.12 s ClockTime = 394 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 4.97581e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 584 | t 0.00583 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005830 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005830 was stored. Time = 0.00584 DICPBiCGStab: Solving for T, Initial residual = 4.78895e-05, Final residual = 3.855e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.87916e-09, Final residual = 3.87916e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.87916e-09, Final residual = 3.87916e-09, No Iterations 0 ExecutionTime = 11.13 s ClockTime = 394 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 5.09472e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 585 | t 0.00584 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005840 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005840 was stored. Time = 0.00585 DICPBiCGStab: Solving for T, Initial residual = 4.89009e-05, Final residual = 3.92624e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 3.94959e-09, Final residual = 3.94959e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 3.94959e-09, Final residual = 3.94959e-09, No Iterations 0 ExecutionTime = 11.15 s ClockTime = 395 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 5.2166e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 586 | t 0.00585 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005850 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005850 was stored. Time = 0.00586 DICPBiCGStab: Solving for T, Initial residual = 4.99675e-05, Final residual = 4.00105e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 4.02382e-09, Final residual = 4.02382e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 4.02382e-09, Final residual = 4.02382e-09, No Iterations 0 ExecutionTime = 11.17 s ClockTime = 396 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 5.34327e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 587 | t 0.00586 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005860 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005860 was stored. Time = 0.00587 DICPBiCGStab: Solving for T, Initial residual = 5.10339e-05, Final residual = 4.07565e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 4.09796e-09, Final residual = 4.09796e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 4.09796e-09, Final residual = 4.09796e-09, No Iterations 0 ExecutionTime = 11.18 s ClockTime = 396 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 5.47295e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 588 | t 0.00587 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005870 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005870 was stored. Time = 0.00588 DICPBiCGStab: Solving for T, Initial residual = 5.21252e-05, Final residual = 4.1526e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 4.17417e-09, Final residual = 4.17417e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 4.17417e-09, Final residual = 4.17417e-09, No Iterations 0 ExecutionTime = 11.2 s ClockTime = 397 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 5.60394e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 589 | t 0.00588 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005880 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005880 was stored. Time = 0.00589 DICPBiCGStab: Solving for T, Initial residual = 5.324e-05, Final residual = 4.23089e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 4.25182e-09, Final residual = 4.25182e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 4.25182e-09, Final residual = 4.25182e-09, No Iterations 0 ExecutionTime = 11.21 s ClockTime = 398 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 5.73874e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 590 | t 0.00589 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005890 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005890 was stored. Time = 0.0059 DICPBiCGStab: Solving for T, Initial residual = 5.43926e-05, Final residual = 4.31142e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 4.32439e-09, Final residual = 4.32439e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 4.32439e-09, Final residual = 4.32439e-09, No Iterations 0 ExecutionTime = 11.23 s ClockTime = 398 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 5.8767e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 591 | t 0.0059 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005900 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005900 was stored. Time = 0.00591 DICPBiCGStab: Solving for T, Initial residual = 5.55886e-05, Final residual = 4.3952e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 4.42373e-09, Final residual = 4.42373e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 4.42373e-09, Final residual = 4.42373e-09, No Iterations 0 ExecutionTime = 11.24 s ClockTime = 399 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 6.01864e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 592 | t 0.00591 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005910 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005910 was stored. Time = 0.00592 DICPBiCGStab: Solving for T, Initial residual = 5.68114e-05, Final residual = 4.4808e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 4.50328e-09, Final residual = 4.50328e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 4.50328e-09, Final residual = 4.50328e-09, No Iterations 0 ExecutionTime = 11.26 s ClockTime = 399 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 6.16275e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 593 | t 0.00592 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005920 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005920 was stored. Time = 0.00593 DICPBiCGStab: Solving for T, Initial residual = 5.80695e-05, Final residual = 4.56872e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 4.59045e-09, Final residual = 4.59045e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 4.59045e-09, Final residual = 4.59045e-09, No Iterations 0 ExecutionTime = 11.28 s ClockTime = 400 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 6.31037e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 594 | t 0.00593 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005930 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005930 was stored. Time = 0.00594 DICPBiCGStab: Solving for T, Initial residual = 5.9345e-05, Final residual = 4.65866e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 4.67974e-09, Final residual = 4.67974e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 4.67974e-09, Final residual = 4.67974e-09, No Iterations 0 ExecutionTime = 11.29 s ClockTime = 401 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 6.46107e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 595 | t 0.00594 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005940 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005940 was stored. Time = 0.00595 DICPBiCGStab: Solving for T, Initial residual = 6.06705e-05, Final residual = 4.7511e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 4.77159e-09, Final residual = 4.77159e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 4.77159e-09, Final residual = 4.77159e-09, No Iterations 0 ExecutionTime = 11.31 s ClockTime = 401 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 6.61484e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 596 | t 0.00595 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005950 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005950 was stored. Time = 0.00596 DICPBiCGStab: Solving for T, Initial residual = 6.20305e-05, Final residual = 4.84591e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 4.86573e-09, Final residual = 4.86573e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 4.86573e-09, Final residual = 4.86573e-09, No Iterations 0 ExecutionTime = 11.32 s ClockTime = 402 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 6.77144e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 597 | t 0.00596 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005960 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005960 was stored. Time = 0.00597 DICPBiCGStab: Solving for T, Initial residual = 6.33862e-05, Final residual = 4.93838e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 4.95751e-09, Final residual = 4.95751e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 4.95751e-09, Final residual = 4.95751e-09, No Iterations 0 ExecutionTime = 11.34 s ClockTime = 403 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 6.92688e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 598 | t 0.00597 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005970 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005970 was stored. Time = 0.00598 DICPBiCGStab: Solving for T, Initial residual = 6.47471e-05, Final residual = 5.03081e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 5.04925e-09, Final residual = 5.04925e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 5.04925e-09, Final residual = 5.04925e-09, No Iterations 0 ExecutionTime = 11.35 s ClockTime = 403 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 7.0828e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 599 | t 0.00598 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005980 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005980 was stored. Time = 0.00599 DICPBiCGStab: Solving for T, Initial residual = 6.61235e-05, Final residual = 5.12335e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 5.14112e-09, Final residual = 5.14112e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 5.14112e-09, Final residual = 5.14112e-09, No Iterations 0 ExecutionTime = 11.37 s ClockTime = 404 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 7.24104e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 600 | t 0.00599 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.005990 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.005990 was stored. Time = 0.006 DICPBiCGStab: Solving for T, Initial residual = 6.75351e-05, Final residual = 5.21809e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 5.23525e-09, Final residual = 5.23525e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 5.23525e-09, Final residual = 5.23525e-09, No Iterations 0 ExecutionTime = 11.48 s ClockTime = 405 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 7.40225e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 601 | t 0.006 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006000 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006000 was stored. ---[preciceAdapter] The coupling timestep completed. Writing the updated results. Time = 0.00601 DICPBiCGStab: Solving for T, Initial residual = 6.89889e-05, Final residual = 5.31691e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 5.33342e-09, Final residual = 5.33342e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 5.33342e-09, Final residual = 5.33342e-09, No Iterations 0 ExecutionTime = 11.5 s ClockTime = 406 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 7.56691e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 602 | t 0.00601 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006010 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006010 was stored. Time = 0.00602 DICPBiCGStab: Solving for T, Initial residual = 7.04827e-05, Final residual = 5.41896e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 5.43474e-09, Final residual = 5.43474e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 5.43474e-09, Final residual = 5.43474e-09, No Iterations 0 ExecutionTime = 11.52 s ClockTime = 407 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 7.73469e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 603 | t 0.00602 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006020 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006020 was stored. Time = 0.00603 DICPBiCGStab: Solving for T, Initial residual = 7.19847e-05, Final residual = 5.52059e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 5.53555e-09, Final residual = 5.53555e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 5.53555e-09, Final residual = 5.53555e-09, No Iterations 0 ExecutionTime = 11.54 s ClockTime = 408 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 7.90399e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 604 | t 0.00603 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006030 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006030 was stored. Time = 0.00604 DICPBiCGStab: Solving for T, Initial residual = 7.35044e-05, Final residual = 5.62335e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 5.63773e-09, Final residual = 5.63773e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 5.63773e-09, Final residual = 5.63773e-09, No Iterations 0 ExecutionTime = 11.55 s ClockTime = 408 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 8.07462e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 605 | t 0.00604 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006040 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006040 was stored. Time = 0.00605 DICPBiCGStab: Solving for T, Initial residual = 7.507e-05, Final residual = 5.72883e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 5.74273e-09, Final residual = 5.74273e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 5.74273e-09, Final residual = 5.74273e-09, No Iterations 0 ExecutionTime = 11.57 s ClockTime = 409 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 8.24755e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 606 | t 0.00605 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006050 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006050 was stored. Time = 0.00606 DICPBiCGStab: Solving for T, Initial residual = 7.66612e-05, Final residual = 5.83535e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 5.84869e-09, Final residual = 5.84869e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 5.84869e-09, Final residual = 5.84869e-09, No Iterations 0 ExecutionTime = 11.59 s ClockTime = 410 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 8.42255e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 607 | t 0.00606 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006060 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006060 was stored. Time = 0.00607 DICPBiCGStab: Solving for T, Initial residual = 7.82528e-05, Final residual = 5.94084e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 5.95364e-09, Final residual = 5.95364e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 5.95364e-09, Final residual = 5.95364e-09, No Iterations 0 ExecutionTime = 11.6 s ClockTime = 410 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 8.59608e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 608 | t 0.00607 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006070 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006070 was stored. Time = 0.00608 DICPBiCGStab: Solving for T, Initial residual = 7.98945e-05, Final residual = 6.04968e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 6.06195e-09, Final residual = 6.06195e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 6.06195e-09, Final residual = 6.06195e-09, No Iterations 0 ExecutionTime = 11.62 s ClockTime = 411 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 8.77313e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 609 | t 0.00608 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006080 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006080 was stored. Time = 0.00609 DICPBiCGStab: Solving for T, Initial residual = 8.15643e-05, Final residual = 6.1598e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 6.17145e-09, Final residual = 6.17145e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 6.17145e-09, Final residual = 6.17145e-09, No Iterations 0 ExecutionTime = 11.64 s ClockTime = 411 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 8.95257e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 610 | t 0.00609 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006090 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006090 was stored. Time = 0.0061 DICPBiCGStab: Solving for T, Initial residual = 8.32439e-05, Final residual = 6.26926e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 6.28036e-09, Final residual = 6.28036e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 6.28036e-09, Final residual = 6.28036e-09, No Iterations 0 ExecutionTime = 11.65 s ClockTime = 412 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 9.13156e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 611 | t 0.0061 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006100 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006100 was stored. Time = 0.00611 DICPBiCGStab: Solving for T, Initial residual = 8.49511e-05, Final residual = 6.38269e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 6.39323e-09, Final residual = 6.39323e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 6.39323e-09, Final residual = 6.39323e-09, No Iterations 0 ExecutionTime = 11.67 s ClockTime = 413 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 9.31231e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 612 | t 0.00611 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006110 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006110 was stored. Time = 0.00612 DICPBiCGStab: Solving for T, Initial residual = 8.66827e-05, Final residual = 6.49781e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 6.50793e-09, Final residual = 6.50793e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 6.50793e-09, Final residual = 6.50793e-09, No Iterations 0 ExecutionTime = 11.68 s ClockTime = 413 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 9.49477e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 613 | t 0.00612 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006120 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006120 was stored. Time = 0.00613 DICPBiCGStab: Solving for T, Initial residual = 8.84278e-05, Final residual = 6.61536e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 6.62505e-09, Final residual = 6.62505e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 6.62505e-09, Final residual = 6.62505e-09, No Iterations 0 ExecutionTime = 11.7 s ClockTime = 414 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 9.67625e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 614 | t 0.00613 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006130 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006130 was stored. Time = 0.00614 DICPBiCGStab: Solving for T, Initial residual = 9.01832e-05, Final residual = 6.73473e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 6.74389e-09, Final residual = 6.74389e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 6.74389e-09, Final residual = 6.74389e-09, No Iterations 0 ExecutionTime = 11.71 s ClockTime = 415 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 9.85715e-08, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 615 | t 0.00614 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006140 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006140 was stored. Time = 0.00615 DICPBiCGStab: Solving for T, Initial residual = 9.19675e-05, Final residual = 6.85672e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 6.86547e-09, Final residual = 6.86547e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 6.86547e-09, Final residual = 6.86547e-09, No Iterations 0 ExecutionTime = 11.73 s ClockTime = 415 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.00395e-07, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 616 | t 0.00615 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006150 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006150 was stored. Time = 0.00616 DICPBiCGStab: Solving for T, Initial residual = 9.37651e-05, Final residual = 6.98009e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 6.98835e-09, Final residual = 6.98835e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 6.98835e-09, Final residual = 6.98835e-09, No Iterations 0 ExecutionTime = 11.75 s ClockTime = 416 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.02228e-07, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 617 | t 0.00616 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006160 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006160 was stored. Time = 0.00617 DICPBiCGStab: Solving for T, Initial residual = 9.55804e-05, Final residual = 7.10767e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 7.11542e-09, Final residual = 7.11542e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 7.11542e-09, Final residual = 7.11542e-09, No Iterations 0 ExecutionTime = 11.76 s ClockTime = 417 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.04073e-07, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 618 | t 0.00617 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006170 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006170 was stored. Time = 0.00618 DICPBiCGStab: Solving for T, Initial residual = 9.74118e-05, Final residual = 7.23694e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 7.24429e-09, Final residual = 7.24429e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 7.24429e-09, Final residual = 7.24429e-09, No Iterations 0 ExecutionTime = 11.78 s ClockTime = 417 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.05902e-07, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 619 | t 0.00618 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006180 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006180 was stored. Time = 0.00619 DICPBiCGStab: Solving for T, Initial residual = 9.92695e-05, Final residual = 7.36748e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 7.37435e-09, Final residual = 7.37435e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 7.37435e-09, Final residual = 7.37435e-09, No Iterations 0 ExecutionTime = 11.8 s ClockTime = 418 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.07745e-07, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 620 | t 0.00619 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006190 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006190 was stored. Time = 0.0062 DICPBiCGStab: Solving for T, Initial residual = 0.00010111, Final residual = 7.4958e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 7.50218e-09, Final residual = 7.50218e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 7.50218e-09, Final residual = 7.50218e-09, No Iterations 0 ExecutionTime = 11.81 s ClockTime = 418 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.0957e-07, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 621 | t 0.0062 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006200 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006200 was stored. Time = 0.00621 DICPBiCGStab: Solving for T, Initial residual = 0.000102951, Final residual = 7.62313e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 7.62914e-09, Final residual = 7.62914e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 7.62914e-09, Final residual = 7.62914e-09, No Iterations 0 ExecutionTime = 11.83 s ClockTime = 419 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.11394e-07, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 622 | t 0.00621 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006210 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006210 was stored. Time = 0.00622 DICPBiCGStab: Solving for T, Initial residual = 0.000104814, Final residual = 7.75191e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 7.75753e-09, Final residual = 7.75753e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 7.75753e-09, Final residual = 7.75753e-09, No Iterations 0 ExecutionTime = 11.84 s ClockTime = 420 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.1322e-07, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 623 | t 0.00622 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006220 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006220 was stored. Time = 0.00623 DICPBiCGStab: Solving for T, Initial residual = 0.000106711, Final residual = 7.88225e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 7.88741e-09, Final residual = 7.88741e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 7.88741e-09, Final residual = 7.88741e-09, No Iterations 0 ExecutionTime = 11.86 s ClockTime = 420 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.15058e-07, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 624 | t 0.00623 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006230 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006230 was stored. Time = 0.00624 DICPBiCGStab: Solving for T, Initial residual = 0.000108631, Final residual = 8.01344e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 8.01821e-09, Final residual = 8.01821e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 8.01821e-09, Final residual = 8.01821e-09, No Iterations 0 ExecutionTime = 11.87 s ClockTime = 421 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.16898e-07, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 625 | t 0.00624 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006240 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006240 was stored. Time = 0.00625 DICPBiCGStab: Solving for T, Initial residual = 0.000110571, Final residual = 8.14947e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 8.1539e-09, Final residual = 8.1539e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 8.1539e-09, Final residual = 8.1539e-09, No Iterations 0 ExecutionTime = 11.89 s ClockTime = 422 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.18738e-07, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 626 | t 0.00625 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006250 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006250 was stored. Time = 0.00626 DICPBiCGStab: Solving for T, Initial residual = 0.00011248, Final residual = 8.28618e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 8.29037e-09, Final residual = 8.29037e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 8.29037e-09, Final residual = 8.29037e-09, No Iterations 0 ExecutionTime = 11.9 s ClockTime = 422 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.205e-07, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 627 | t 0.00626 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006260 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006260 was stored. Time = 0.00627 DICPBiCGStab: Solving for T, Initial residual = 0.000114423, Final residual = 8.42602e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 8.42988e-09, Final residual = 8.42988e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 8.42988e-09, Final residual = 8.42988e-09, No Iterations 0 ExecutionTime = 11.92 s ClockTime = 423 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.22304e-07, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 628 | t 0.00627 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006270 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006270 was stored. Time = 0.00628 DICPBiCGStab: Solving for T, Initial residual = 0.000116364, Final residual = 8.5655e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 8.56905e-09, Final residual = 8.56905e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 8.56905e-09, Final residual = 8.56905e-09, No Iterations 0 ExecutionTime = 11.94 s ClockTime = 424 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.24102e-07, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 629 | t 0.00628 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006280 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006280 was stored. Time = 0.00629 DICPBiCGStab: Solving for T, Initial residual = 0.000118289, Final residual = 8.70447e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 8.70773e-09, Final residual = 8.70773e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 8.70773e-09, Final residual = 8.70773e-09, No Iterations 0 ExecutionTime = 11.96 s ClockTime = 424 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.25867e-07, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 630 | t 0.00629 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006290 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006290 was stored. Time = 0.0063 DICPBiCGStab: Solving for T, Initial residual = 0.000120226, Final residual = 8.84592e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 8.84881e-09, Final residual = 8.84881e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 8.84881e-09, Final residual = 8.84881e-09, No Iterations 0 ExecutionTime = 11.97 s ClockTime = 425 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.27633e-07, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 631 | t 0.0063 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006300 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006300 was stored. Time = 0.00631 DICPBiCGStab: Solving for T, Initial residual = 0.000122166, Final residual = 8.98663e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 8.98925e-09, Final residual = 8.98925e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 8.98925e-09, Final residual = 8.98925e-09, No Iterations 0 ExecutionTime = 11.99 s ClockTime = 425 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.29375e-07, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 632 | t 0.00631 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006310 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006310 was stored. Time = 0.00632 DICPBiCGStab: Solving for T, Initial residual = 0.000124115, Final residual = 9.12658e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 9.12897e-09, Final residual = 9.12897e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 9.12897e-09, Final residual = 9.12897e-09, No Iterations 0 ExecutionTime = 12 s ClockTime = 426 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.31105e-07, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 633 | t 0.00632 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006320 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006320 was stored. Time = 0.00633 DICPBiCGStab: Solving for T, Initial residual = 0.000126104, Final residual = 9.26959e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 9.27171e-09, Final residual = 9.27171e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 9.27171e-09, Final residual = 9.27171e-09, No Iterations 0 ExecutionTime = 12.02 s ClockTime = 427 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.32851e-07, limit = 1e-06, normalization = 27179.4, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 634 | t 0.00633 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006330 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006330 was stored. Time = 0.00634 DICPBiCGStab: Solving for T, Initial residual = 0.000128102, Final residual = 9.41274e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 9.41444e-09, Final residual = 9.41444e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 9.41444e-09, Final residual = 9.41444e-09, No Iterations 0 ExecutionTime = 12.03 s ClockTime = 427 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.34581e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 635 | t 0.00634 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006340 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006340 was stored. Time = 0.00635 DICPBiCGStab: Solving for T, Initial residual = 0.000130098, Final residual = 9.55534e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 9.55684e-09, Final residual = 9.55684e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 9.55684e-09, Final residual = 9.55684e-09, No Iterations 0 ExecutionTime = 12.05 s ClockTime = 428 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.36302e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 636 | t 0.00635 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006350 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006350 was stored. Time = 0.00636 DICPBiCGStab: Solving for T, Initial residual = 0.000132088, Final residual = 9.69564e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 9.69701e-09, Final residual = 9.69701e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 9.69701e-09, Final residual = 9.69701e-09, No Iterations 0 ExecutionTime = 12.06 s ClockTime = 429 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.38007e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 637 | t 0.00636 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006360 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006360 was stored. Time = 0.00637 DICPBiCGStab: Solving for T, Initial residual = 0.000134066, Final residual = 9.83442e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 9.8356e-09, Final residual = 9.8356e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 9.8356e-09, Final residual = 9.8356e-09, No Iterations 0 ExecutionTime = 12.08 s ClockTime = 429 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.39671e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 638 | t 0.00637 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006370 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006370 was stored. Time = 0.00638 DICPBiCGStab: Solving for T, Initial residual = 0.000136061, Final residual = 9.97512e-09, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 9.97623e-09, Final residual = 9.97623e-09, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 9.97623e-09, Final residual = 9.97623e-09, No Iterations 0 ExecutionTime = 12.1 s ClockTime = 430 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.41337e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 639 | t 0.00638 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006380 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006380 was stored. Time = 0.00639 DICPBiCGStab: Solving for T, Initial residual = 0.000138067, Final residual = 1.01158e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.01167e-08, Final residual = 1.01167e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.01167e-08, Final residual = 1.01167e-08, No Iterations 0 ExecutionTime = 12.12 s ClockTime = 431 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.42999e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 640 | t 0.00639 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006390 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006390 was stored. Time = 0.0064 DICPBiCGStab: Solving for T, Initial residual = 0.000140078, Final residual = 1.02555e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.02564e-08, Final residual = 1.02564e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.02564e-08, Final residual = 1.02564e-08, No Iterations 0 ExecutionTime = 12.13 s ClockTime = 431 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.44645e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 641 | t 0.0064 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006400 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006400 was stored. Time = 0.00641 DICPBiCGStab: Solving for T, Initial residual = 0.000142086, Final residual = 1.03938e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.03945e-08, Final residual = 1.03945e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.03945e-08, Final residual = 1.03945e-08, No Iterations 0 ExecutionTime = 12.15 s ClockTime = 432 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.46271e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 642 | t 0.00641 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006410 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006410 was stored. Time = 0.00642 DICPBiCGStab: Solving for T, Initial residual = 0.000144088, Final residual = 1.05321e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.05327e-08, Final residual = 1.05327e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.05327e-08, Final residual = 1.05327e-08, No Iterations 0 ExecutionTime = 12.16 s ClockTime = 433 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.47875e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 643 | t 0.00642 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006420 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006420 was stored. Time = 0.00643 DICPBiCGStab: Solving for T, Initial residual = 0.000146062, Final residual = 1.06692e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.06696e-08, Final residual = 1.06696e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.06696e-08, Final residual = 1.06696e-08, No Iterations 0 ExecutionTime = 12.18 s ClockTime = 433 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.49427e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 644 | t 0.00643 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006430 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006430 was stored. Time = 0.00644 DICPBiCGStab: Solving for T, Initial residual = 0.000148031, Final residual = 1.08084e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.0808e-08, Final residual = 1.0808e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.0808e-08, Final residual = 1.0808e-08, No Iterations 0 ExecutionTime = 12.2 s ClockTime = 434 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.50971e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 645 | t 0.00644 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006440 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006440 was stored. Time = 0.00645 DICPBiCGStab: Solving for T, Initial residual = 0.000149943, Final residual = 1.09452e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.09441e-08, Final residual = 1.09441e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.09441e-08, Final residual = 1.09441e-08, No Iterations 0 ExecutionTime = 12.21 s ClockTime = 434 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.52432e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 646 | t 0.00645 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006450 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006450 was stored. Time = 0.00646 DICPBiCGStab: Solving for T, Initial residual = 0.000151864, Final residual = 1.10819e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.10807e-08, Final residual = 1.10807e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.10807e-08, Final residual = 1.10807e-08, No Iterations 0 ExecutionTime = 12.23 s ClockTime = 435 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.53901e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 647 | t 0.00646 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006460 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006460 was stored. Time = 0.00647 DICPBiCGStab: Solving for T, Initial residual = 0.000153796, Final residual = 1.12187e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.12174e-08, Final residual = 1.12174e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.12174e-08, Final residual = 1.12174e-08, No Iterations 0 ExecutionTime = 12.24 s ClockTime = 436 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.55371e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 648 | t 0.00647 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006470 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006470 was stored. Time = 0.00648 DICPBiCGStab: Solving for T, Initial residual = 0.00015569, Final residual = 1.13523e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.13509e-08, Final residual = 1.13509e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.13509e-08, Final residual = 1.13509e-08, No Iterations 0 ExecutionTime = 12.26 s ClockTime = 436 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.56777e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 649 | t 0.00648 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006480 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006480 was stored. Time = 0.00649 DICPBiCGStab: Solving for T, Initial residual = 0.000157603, Final residual = 1.14862e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.14847e-08, Final residual = 1.14847e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.14847e-08, Final residual = 1.14847e-08, No Iterations 0 ExecutionTime = 12.27 s ClockTime = 437 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.58186e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 650 | t 0.00649 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006490 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006490 was stored. Time = 0.0065 DICPBiCGStab: Solving for T, Initial residual = 0.000159525, Final residual = 1.16206e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.1619e-08, Final residual = 1.1619e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.1619e-08, Final residual = 1.1619e-08, No Iterations 0 ExecutionTime = 12.28 s ClockTime = 438 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.5959e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 651 | t 0.0065 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006500 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006500 was stored. Time = 0.00651 DICPBiCGStab: Solving for T, Initial residual = 0.000161429, Final residual = 1.17534e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.17519e-08, Final residual = 1.17519e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.17519e-08, Final residual = 1.17519e-08, No Iterations 0 ExecutionTime = 12.3 s ClockTime = 438 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.60952e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 652 | t 0.00651 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006510 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006510 was stored. Time = 0.00652 DICPBiCGStab: Solving for T, Initial residual = 0.000163337, Final residual = 1.18858e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.18843e-08, Final residual = 1.18843e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.18843e-08, Final residual = 1.18843e-08, No Iterations 0 ExecutionTime = 12.32 s ClockTime = 439 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.6231e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 653 | t 0.00652 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006520 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006520 was stored. Time = 0.00653 DICPBiCGStab: Solving for T, Initial residual = 0.000165227, Final residual = 1.20168e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.20154e-08, Final residual = 1.20154e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.20154e-08, Final residual = 1.20154e-08, No Iterations 0 ExecutionTime = 12.33 s ClockTime = 440 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.63634e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 654 | t 0.00653 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006530 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006530 was stored. Time = 0.00654 DICPBiCGStab: Solving for T, Initial residual = 0.000167095, Final residual = 1.21465e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.21453e-08, Final residual = 1.21453e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.21453e-08, Final residual = 1.21453e-08, No Iterations 0 ExecutionTime = 12.35 s ClockTime = 440 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.6492e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 655 | t 0.00654 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006540 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006540 was stored. Time = 0.00655 DICPBiCGStab: Solving for T, Initial residual = 0.000168962, Final residual = 1.22763e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.22736e-08, Final residual = 1.22736e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.22736e-08, Final residual = 1.22736e-08, No Iterations 0 ExecutionTime = 12.37 s ClockTime = 441 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.66198e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 656 | t 0.00655 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006550 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006550 was stored. Time = 0.00656 DICPBiCGStab: Solving for T, Initial residual = 0.000170819, Final residual = 1.24036e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.24061e-08, Final residual = 1.24061e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.24061e-08, Final residual = 1.24061e-08, No Iterations 0 ExecutionTime = 12.38 s ClockTime = 442 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.67444e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 657 | t 0.00656 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006560 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006560 was stored. Time = 0.00657 DICPBiCGStab: Solving for T, Initial residual = 0.000172643, Final residual = 1.25282e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.25282e-08, Final residual = 1.25282e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.25282e-08, Final residual = 1.25282e-08, No Iterations 0 ExecutionTime = 12.4 s ClockTime = 442 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.6865e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 658 | t 0.00657 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006570 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006570 was stored. Time = 0.00658 DICPBiCGStab: Solving for T, Initial residual = 0.000174415, Final residual = 1.26488e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.26486e-08, Final residual = 1.26486e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.26486e-08, Final residual = 1.26486e-08, No Iterations 0 ExecutionTime = 12.41 s ClockTime = 443 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.69786e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 659 | t 0.00658 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006580 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006580 was stored. Time = 0.00659 DICPBiCGStab: Solving for T, Initial residual = 0.000176189, Final residual = 1.27694e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.27694e-08, Final residual = 1.27694e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.27694e-08, Final residual = 1.27694e-08, No Iterations 0 ExecutionTime = 12.43 s ClockTime = 443 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.7093e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 660 | t 0.00659 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006590 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006590 was stored. Time = 0.0066 DICPBiCGStab: Solving for T, Initial residual = 0.000177967, Final residual = 1.28906e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.28905e-08, Final residual = 1.28905e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.28905e-08, Final residual = 1.28905e-08, No Iterations 0 ExecutionTime = 12.45 s ClockTime = 444 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.7207e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 661 | t 0.0066 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006600 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006600 was stored. Time = 0.00661 DICPBiCGStab: Solving for T, Initial residual = 0.000179721, Final residual = 1.30101e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.301e-08, Final residual = 1.301e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.301e-08, Final residual = 1.301e-08, No Iterations 0 ExecutionTime = 12.46 s ClockTime = 445 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.73167e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 662 | t 0.00661 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006610 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006610 was stored. Time = 0.00662 DICPBiCGStab: Solving for T, Initial residual = 0.000181443, Final residual = 1.31262e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.31262e-08, Final residual = 1.31262e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.31262e-08, Final residual = 1.31262e-08, No Iterations 0 ExecutionTime = 12.48 s ClockTime = 445 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.74208e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 663 | t 0.00662 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006620 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006620 was stored. Time = 0.00663 DICPBiCGStab: Solving for T, Initial residual = 0.000183161, Final residual = 1.32429e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.32429e-08, Final residual = 1.32429e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.32429e-08, Final residual = 1.32429e-08, No Iterations 0 ExecutionTime = 12.5 s ClockTime = 446 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.75252e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 664 | t 0.00663 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006630 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006630 was stored. Time = 0.00664 DICPBiCGStab: Solving for T, Initial residual = 0.000184867, Final residual = 1.33586e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.33586e-08, Final residual = 1.33586e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.33586e-08, Final residual = 1.33586e-08, No Iterations 0 ExecutionTime = 12.51 s ClockTime = 447 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.76284e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 665 | t 0.00664 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006640 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006640 was stored. Time = 0.00665 DICPBiCGStab: Solving for T, Initial residual = 0.000186537, Final residual = 1.34744e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.34746e-08, Final residual = 1.34746e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.34746e-08, Final residual = 1.34746e-08, No Iterations 0 ExecutionTime = 12.53 s ClockTime = 447 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.77269e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 666 | t 0.00665 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006650 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006650 was stored. Time = 0.00666 DICPBiCGStab: Solving for T, Initial residual = 0.000188162, Final residual = 1.35882e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.35885e-08, Final residual = 1.35885e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.35885e-08, Final residual = 1.35885e-08, No Iterations 0 ExecutionTime = 12.54 s ClockTime = 448 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.78192e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 667 | t 0.00666 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006660 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006660 was stored. Time = 0.00667 DICPBiCGStab: Solving for T, Initial residual = 0.000189792, Final residual = 1.37029e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.37033e-08, Final residual = 1.37033e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.37033e-08, Final residual = 1.37033e-08, No Iterations 0 ExecutionTime = 12.56 s ClockTime = 449 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.79123e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 668 | t 0.00667 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006670 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006670 was stored. Time = 0.00668 DICPBiCGStab: Solving for T, Initial residual = 0.000191398, Final residual = 1.38165e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.3817e-08, Final residual = 1.3817e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.3817e-08, Final residual = 1.3817e-08, No Iterations 0 ExecutionTime = 12.58 s ClockTime = 449 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.80024e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 669 | t 0.00668 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006680 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006680 was stored. Time = 0.00669 DICPBiCGStab: Solving for T, Initial residual = 0.000192981, Final residual = 1.3929e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.39296e-08, Final residual = 1.39296e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.39296e-08, Final residual = 1.39296e-08, No Iterations 0 ExecutionTime = 12.59 s ClockTime = 450 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.80892e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 670 | t 0.00669 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006690 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006690 was stored. Time = 0.0067 DICPBiCGStab: Solving for T, Initial residual = 0.000194557, Final residual = 1.40405e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.40412e-08, Final residual = 1.40412e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.40412e-08, Final residual = 1.40412e-08, No Iterations 0 ExecutionTime = 12.6 s ClockTime = 451 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.81751e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 671 | t 0.0067 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006700 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006700 was stored. Time = 0.00671 DICPBiCGStab: Solving for T, Initial residual = 0.000196114, Final residual = 1.415e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.41508e-08, Final residual = 1.41508e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.41508e-08, Final residual = 1.41508e-08, No Iterations 0 ExecutionTime = 12.62 s ClockTime = 451 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.82593e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 672 | t 0.00671 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006710 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006710 was stored. Time = 0.00672 DICPBiCGStab: Solving for T, Initial residual = 0.000197643, Final residual = 1.42582e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.42592e-08, Final residual = 1.42592e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.42592e-08, Final residual = 1.42592e-08, No Iterations 0 ExecutionTime = 12.64 s ClockTime = 452 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.83407e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 673 | t 0.00672 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006720 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006720 was stored. Time = 0.00673 DICPBiCGStab: Solving for T, Initial residual = 0.000199146, Final residual = 1.43649e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.4366e-08, Final residual = 1.4366e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.4366e-08, Final residual = 1.4366e-08, No Iterations 0 ExecutionTime = 12.66 s ClockTime = 452 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.84194e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 674 | t 0.00673 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006730 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006730 was stored. Time = 0.00674 DICPBiCGStab: Solving for T, Initial residual = 0.000200631, Final residual = 1.44705e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.44717e-08, Final residual = 1.44717e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.44717e-08, Final residual = 1.44717e-08, No Iterations 0 ExecutionTime = 12.67 s ClockTime = 453 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.84958e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 675 | t 0.00674 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006740 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006740 was stored. Time = 0.00675 DICPBiCGStab: Solving for T, Initial residual = 0.000202103, Final residual = 1.45752e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.45766e-08, Final residual = 1.45766e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.45766e-08, Final residual = 1.45766e-08, No Iterations 0 ExecutionTime = 12.69 s ClockTime = 454 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.85703e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 676 | t 0.00675 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006750 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006750 was stored. Time = 0.00676 DICPBiCGStab: Solving for T, Initial residual = 0.000203541, Final residual = 1.46765e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.46781e-08, Final residual = 1.46781e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.46781e-08, Final residual = 1.46781e-08, No Iterations 0 ExecutionTime = 12.7 s ClockTime = 454 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.86401e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 677 | t 0.00676 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006760 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006760 was stored. Time = 0.00677 DICPBiCGStab: Solving for T, Initial residual = 0.00020496, Final residual = 1.47761e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.47777e-08, Final residual = 1.47777e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.47777e-08, Final residual = 1.47777e-08, No Iterations 0 ExecutionTime = 12.72 s ClockTime = 455 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.87088e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 678 | t 0.00677 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006770 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006770 was stored. Time = 0.00678 DICPBiCGStab: Solving for T, Initial residual = 0.000206353, Final residual = 1.48741e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.48759e-08, Final residual = 1.48759e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.48759e-08, Final residual = 1.48759e-08, No Iterations 0 ExecutionTime = 12.73 s ClockTime = 456 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.87754e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 679 | t 0.00678 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006780 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006780 was stored. Time = 0.00679 DICPBiCGStab: Solving for T, Initial residual = 0.000207714, Final residual = 1.49699e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.49718e-08, Final residual = 1.49718e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.49718e-08, Final residual = 1.49718e-08, No Iterations 0 ExecutionTime = 12.75 s ClockTime = 456 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.88394e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 680 | t 0.00679 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006790 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006790 was stored. Time = 0.0068 DICPBiCGStab: Solving for T, Initial residual = 0.000208997, Final residual = 1.50623e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.50644e-08, Final residual = 1.50644e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.50644e-08, Final residual = 1.50644e-08, No Iterations 0 ExecutionTime = 12.76 s ClockTime = 457 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.88947e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 681 | t 0.0068 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006800 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006800 was stored. Time = 0.00681 DICPBiCGStab: Solving for T, Initial residual = 0.000210269, Final residual = 1.51538e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.5156e-08, Final residual = 1.5156e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.5156e-08, Final residual = 1.5156e-08, No Iterations 0 ExecutionTime = 12.78 s ClockTime = 458 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.89498e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 682 | t 0.00681 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006810 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006810 was stored. Time = 0.00682 DICPBiCGStab: Solving for T, Initial residual = 0.000211504, Final residual = 1.52428e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.52451e-08, Final residual = 1.52451e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.52451e-08, Final residual = 1.52451e-08, No Iterations 0 ExecutionTime = 12.8 s ClockTime = 458 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.90019e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 683 | t 0.00682 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006820 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006820 was stored. Time = 0.00683 DICPBiCGStab: Solving for T, Initial residual = 0.000212665, Final residual = 1.53281e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.53305e-08, Final residual = 1.53305e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.53305e-08, Final residual = 1.53305e-08, No Iterations 0 ExecutionTime = 12.81 s ClockTime = 459 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.90458e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 684 | t 0.00683 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006830 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006830 was stored. Time = 0.00684 DICPBiCGStab: Solving for T, Initial residual = 0.000213841, Final residual = 1.54167e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.54192e-08, Final residual = 1.54192e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.54192e-08, Final residual = 1.54192e-08, No Iterations 0 ExecutionTime = 12.83 s ClockTime = 459 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.90931e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 685 | t 0.00684 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006840 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006840 was stored. Time = 0.00685 DICPBiCGStab: Solving for T, Initial residual = 0.000215021, Final residual = 1.5505e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.55076e-08, Final residual = 1.55076e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.55076e-08, Final residual = 1.55076e-08, No Iterations 0 ExecutionTime = 12.84 s ClockTime = 460 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.91417e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 686 | t 0.00685 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006850 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006850 was stored. Time = 0.00686 DICPBiCGStab: Solving for T, Initial residual = 0.000216183, Final residual = 1.55916e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.55943e-08, Final residual = 1.55943e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.55943e-08, Final residual = 1.55943e-08, No Iterations 0 ExecutionTime = 12.86 s ClockTime = 461 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.91881e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 687 | t 0.00686 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006860 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006860 was stored. Time = 0.00687 DICPBiCGStab: Solving for T, Initial residual = 0.000217303, Final residual = 1.56752e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.56781e-08, Final residual = 1.56781e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.56781e-08, Final residual = 1.56781e-08, No Iterations 0 ExecutionTime = 12.87 s ClockTime = 461 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.92304e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 688 | t 0.00687 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006870 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006870 was stored. Time = 0.00688 DICPBiCGStab: Solving for T, Initial residual = 0.000218391, Final residual = 1.5756e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.57589e-08, Final residual = 1.57589e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.57589e-08, Final residual = 1.57589e-08, No Iterations 0 ExecutionTime = 12.89 s ClockTime = 462 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.92701e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 689 | t 0.00688 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006880 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006880 was stored. Time = 0.00689 DICPBiCGStab: Solving for T, Initial residual = 0.000219428, Final residual = 1.58326e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.58357e-08, Final residual = 1.58357e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.58357e-08, Final residual = 1.58357e-08, No Iterations 0 ExecutionTime = 12.91 s ClockTime = 463 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.93053e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 690 | t 0.00689 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006890 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006890 was stored. Time = 0.0069 DICPBiCGStab: Solving for T, Initial residual = 0.000220404, Final residual = 1.59039e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.59071e-08, Final residual = 1.59071e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.59071e-08, Final residual = 1.59071e-08, No Iterations 0 ExecutionTime = 12.93 s ClockTime = 463 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.93353e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 691 | t 0.0069 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006900 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006900 was stored. Time = 0.00691 DICPBiCGStab: Solving for T, Initial residual = 0.000221373, Final residual = 1.59741e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.59774e-08, Final residual = 1.59774e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.59774e-08, Final residual = 1.59774e-08, No Iterations 0 ExecutionTime = 12.94 s ClockTime = 464 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.93666e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 692 | t 0.00691 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006910 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006910 was stored. Time = 0.00692 DICPBiCGStab: Solving for T, Initial residual = 0.000222329, Final residual = 1.60432e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.60466e-08, Final residual = 1.60466e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.60466e-08, Final residual = 1.60466e-08, No Iterations 0 ExecutionTime = 12.96 s ClockTime = 465 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.93979e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 693 | t 0.00692 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006920 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006920 was stored. Time = 0.00693 DICPBiCGStab: Solving for T, Initial residual = 0.000223263, Final residual = 1.61111e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.61146e-08, Final residual = 1.61146e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.61146e-08, Final residual = 1.61146e-08, No Iterations 0 ExecutionTime = 12.97 s ClockTime = 465 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.94277e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 694 | t 0.00693 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006930 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006930 was stored. Time = 0.00694 DICPBiCGStab: Solving for T, Initial residual = 0.000224184, Final residual = 1.61783e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.61819e-08, Final residual = 1.61819e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.61819e-08, Final residual = 1.61819e-08, No Iterations 0 ExecutionTime = 12.99 s ClockTime = 466 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.94564e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 695 | t 0.00694 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006940 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006940 was stored. Time = 0.00695 DICPBiCGStab: Solving for T, Initial residual = 0.000225087, Final residual = 1.62438e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.62474e-08, Final residual = 1.62474e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.62474e-08, Final residual = 1.62474e-08, No Iterations 0 ExecutionTime = 13 s ClockTime = 466 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.94846e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 696 | t 0.00695 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006950 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006950 was stored. Time = 0.00696 DICPBiCGStab: Solving for T, Initial residual = 0.00022596, Final residual = 1.63076e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.63113e-08, Final residual = 1.63113e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.63113e-08, Final residual = 1.63113e-08, No Iterations 0 ExecutionTime = 13.02 s ClockTime = 467 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.95109e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 697 | t 0.00696 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006960 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006960 was stored. Time = 0.00697 DICPBiCGStab: Solving for T, Initial residual = 0.0002268, Final residual = 1.63693e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.63732e-08, Final residual = 1.63732e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.63732e-08, Final residual = 1.63732e-08, No Iterations 0 ExecutionTime = 13.04 s ClockTime = 468 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.95351e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 698 | t 0.00697 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006970 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006970 was stored. Time = 0.00698 DICPBiCGStab: Solving for T, Initial residual = 0.000227571, Final residual = 1.64256e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.64296e-08, Final residual = 1.64296e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.64296e-08, Final residual = 1.64296e-08, No Iterations 0 ExecutionTime = 13.05 s ClockTime = 468 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.95526e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 699 | t 0.00698 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006980 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006980 was stored. Time = 0.00699 DICPBiCGStab: Solving for T, Initial residual = 0.000228308, Final residual = 1.64799e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.6484e-08, Final residual = 1.6484e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.6484e-08, Final residual = 1.6484e-08, No Iterations 0 ExecutionTime = 13.07 s ClockTime = 469 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.95679e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 700 | t 0.00699 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.006990 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.006990 was stored. Time = 0.007 DICPBiCGStab: Solving for T, Initial residual = 0.00022902, Final residual = 1.65325e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.65367e-08, Final residual = 1.65367e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.65367e-08, Final residual = 1.65367e-08, No Iterations 0 ExecutionTime = 13.18 s ClockTime = 470 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.95817e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 701 | t 0.007 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007000 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007000 was stored. ---[preciceAdapter] The coupling timestep completed. Writing the updated results. Time = 0.00701 DICPBiCGStab: Solving for T, Initial residual = 0.000229717, Final residual = 1.65838e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.65881e-08, Final residual = 1.65881e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.65881e-08, Final residual = 1.65881e-08, No Iterations 0 ExecutionTime = 13.21 s ClockTime = 472 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.95957e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 702 | t 0.00701 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007010 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007010 was stored. Time = 0.00702 DICPBiCGStab: Solving for T, Initial residual = 0.000230366, Final residual = 1.66308e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.66351e-08, Final residual = 1.66351e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.66351e-08, Final residual = 1.66351e-08, No Iterations 0 ExecutionTime = 13.22 s ClockTime = 472 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.96053e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 703 | t 0.00702 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007020 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007020 was stored. Time = 0.00703 DICPBiCGStab: Solving for T, Initial residual = 0.000230982, Final residual = 1.66749e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.66791e-08, Final residual = 1.66791e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.66791e-08, Final residual = 1.66791e-08, No Iterations 0 ExecutionTime = 13.24 s ClockTime = 473 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.96132e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 704 | t 0.00703 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007030 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007030 was stored. Time = 0.00704 DICPBiCGStab: Solving for T, Initial residual = 0.000231593, Final residual = 1.67189e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.67231e-08, Final residual = 1.67231e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.67231e-08, Final residual = 1.67231e-08, No Iterations 0 ExecutionTime = 13.25 s ClockTime = 473 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.96225e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 705 | t 0.00704 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007040 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007040 was stored. Time = 0.00705 DICPBiCGStab: Solving for T, Initial residual = 0.000232181, Final residual = 1.67607e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.67651e-08, Final residual = 1.67651e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.67651e-08, Final residual = 1.67651e-08, No Iterations 0 ExecutionTime = 13.27 s ClockTime = 474 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.96306e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 706 | t 0.00705 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007050 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007050 was stored. Time = 0.00706 DICPBiCGStab: Solving for T, Initial residual = 0.000232758, Final residual = 1.6802e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.68063e-08, Final residual = 1.68063e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.68063e-08, Final residual = 1.68063e-08, No Iterations 0 ExecutionTime = 13.29 s ClockTime = 475 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.96388e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 707 | t 0.00706 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007060 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007060 was stored. Time = 0.00707 DICPBiCGStab: Solving for T, Initial residual = 0.000233297, Final residual = 1.68408e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.68451e-08, Final residual = 1.68451e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.68451e-08, Final residual = 1.68451e-08, No Iterations 0 ExecutionTime = 13.3 s ClockTime = 475 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.96445e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 708 | t 0.00707 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007070 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007070 was stored. Time = 0.00708 DICPBiCGStab: Solving for T, Initial residual = 0.000233778, Final residual = 1.68746e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.6879e-08, Final residual = 1.6879e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.6879e-08, Final residual = 1.6879e-08, No Iterations 0 ExecutionTime = 13.32 s ClockTime = 476 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.96456e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 709 | t 0.00708 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007080 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007080 was stored. Time = 0.00709 DICPBiCGStab: Solving for T, Initial residual = 0.000234193, Final residual = 1.69033e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.69077e-08, Final residual = 1.69077e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.69077e-08, Final residual = 1.69077e-08, No Iterations 0 ExecutionTime = 13.34 s ClockTime = 477 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.96413e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 710 | t 0.00709 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007090 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007090 was stored. Time = 0.0071 DICPBiCGStab: Solving for T, Initial residual = 0.00023461, Final residual = 1.69324e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.69369e-08, Final residual = 1.69369e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.69369e-08, Final residual = 1.69369e-08, No Iterations 0 ExecutionTime = 13.35 s ClockTime = 477 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.96393e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 711 | t 0.0071 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007100 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007100 was stored. Time = 0.00711 DICPBiCGStab: Solving for T, Initial residual = 0.000235025, Final residual = 1.6962e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.69664e-08, Final residual = 1.69664e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.69664e-08, Final residual = 1.69664e-08, No Iterations 0 ExecutionTime = 13.37 s ClockTime = 478 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.96391e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 712 | t 0.00711 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007110 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007110 was stored. Time = 0.00712 DICPBiCGStab: Solving for T, Initial residual = 0.000235407, Final residual = 1.69887e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.69931e-08, Final residual = 1.69931e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.69931e-08, Final residual = 1.69931e-08, No Iterations 0 ExecutionTime = 13.38 s ClockTime = 479 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.96362e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 713 | t 0.00712 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007120 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007120 was stored. Time = 0.00713 DICPBiCGStab: Solving for T, Initial residual = 0.000235779, Final residual = 1.70139e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.70183e-08, Final residual = 1.70183e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.70183e-08, Final residual = 1.70183e-08, No Iterations 0 ExecutionTime = 13.4 s ClockTime = 479 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.96338e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 714 | t 0.00713 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007130 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007130 was stored. Time = 0.00714 DICPBiCGStab: Solving for T, Initial residual = 0.000236115, Final residual = 1.70375e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.70418e-08, Final residual = 1.70418e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.70418e-08, Final residual = 1.70418e-08, No Iterations 0 ExecutionTime = 13.41 s ClockTime = 480 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.9629e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 715 | t 0.00714 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007140 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007140 was stored. Time = 0.00715 DICPBiCGStab: Solving for T, Initial residual = 0.000236434, Final residual = 1.70595e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.70638e-08, Final residual = 1.70638e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.70638e-08, Final residual = 1.70638e-08, No Iterations 0 ExecutionTime = 13.43 s ClockTime = 480 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.96243e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 716 | t 0.00715 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007150 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007150 was stored. Time = 0.00716 DICPBiCGStab: Solving for T, Initial residual = 0.000236708, Final residual = 1.70789e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.70832e-08, Final residual = 1.70832e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.70832e-08, Final residual = 1.70832e-08, No Iterations 0 ExecutionTime = 13.45 s ClockTime = 481 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.96155e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 717 | t 0.00716 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007160 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007160 was stored. Time = 0.00717 DICPBiCGStab: Solving for T, Initial residual = 0.000236983, Final residual = 1.70985e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.71029e-08, Final residual = 1.71029e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.71029e-08, Final residual = 1.71029e-08, No Iterations 0 ExecutionTime = 13.46 s ClockTime = 482 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.96089e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 718 | t 0.00717 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007170 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007170 was stored. Time = 0.00718 DICPBiCGStab: Solving for T, Initial residual = 0.000237244, Final residual = 1.71169e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.71212e-08, Final residual = 1.71212e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.71212e-08, Final residual = 1.71212e-08, No Iterations 0 ExecutionTime = 13.47 s ClockTime = 482 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.96025e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 719 | t 0.00718 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007180 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007180 was stored. Time = 0.00719 DICPBiCGStab: Solving for T, Initial residual = 0.000237452, Final residual = 1.71312e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.71354e-08, Final residual = 1.71354e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.71354e-08, Final residual = 1.71354e-08, No Iterations 0 ExecutionTime = 13.5 s ClockTime = 483 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.95917e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 720 | t 0.00719 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007190 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007190 was stored. Time = 0.0072 DICPBiCGStab: Solving for T, Initial residual = 0.000237631, Final residual = 1.71428e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.7147e-08, Final residual = 1.7147e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.7147e-08, Final residual = 1.7147e-08, No Iterations 0 ExecutionTime = 13.51 s ClockTime = 484 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.95798e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 721 | t 0.0072 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007200 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007200 was stored. Time = 0.00721 DICPBiCGStab: Solving for T, Initial residual = 0.000237767, Final residual = 1.71511e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.71552e-08, Final residual = 1.71552e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.71552e-08, Final residual = 1.71552e-08, No Iterations 0 ExecutionTime = 13.52 s ClockTime = 484 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.95651e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 722 | t 0.00721 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007210 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007210 was stored. Time = 0.00722 DICPBiCGStab: Solving for T, Initial residual = 0.000237889, Final residual = 1.71581e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.71622e-08, Final residual = 1.71622e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.71622e-08, Final residual = 1.71622e-08, No Iterations 0 ExecutionTime = 13.54 s ClockTime = 485 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.955e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 723 | t 0.00722 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007220 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007220 was stored. Time = 0.00723 DICPBiCGStab: Solving for T, Initial residual = 0.000237996, Final residual = 1.71638e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.71677e-08, Final residual = 1.71677e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.71677e-08, Final residual = 1.71677e-08, No Iterations 0 ExecutionTime = 13.56 s ClockTime = 485 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.95346e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 724 | t 0.00723 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007230 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007230 was stored. Time = 0.00724 DICPBiCGStab: Solving for T, Initial residual = 0.000238103, Final residual = 1.71691e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.71729e-08, Final residual = 1.71729e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.71729e-08, Final residual = 1.71729e-08, No Iterations 0 ExecutionTime = 13.58 s ClockTime = 486 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.95209e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 725 | t 0.00724 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007240 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007240 was stored. Time = 0.00725 DICPBiCGStab: Solving for T, Initial residual = 0.000238201, Final residual = 1.71741e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.71778e-08, Final residual = 1.71778e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.71778e-08, Final residual = 1.71778e-08, No Iterations 0 ExecutionTime = 13.59 s ClockTime = 487 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.95076e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 726 | t 0.00725 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007250 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007250 was stored. Time = 0.00726 DICPBiCGStab: Solving for T, Initial residual = 0.000238288, Final residual = 1.71784e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.7182e-08, Final residual = 1.7182e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.7182e-08, Final residual = 1.7182e-08, No Iterations 0 ExecutionTime = 13.6 s ClockTime = 487 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.94946e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 727 | t 0.00726 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007260 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007260 was stored. Time = 0.00727 DICPBiCGStab: Solving for T, Initial residual = 0.000238336, Final residual = 1.71789e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.71824e-08, Final residual = 1.71824e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.71824e-08, Final residual = 1.71824e-08, No Iterations 0 ExecutionTime = 13.62 s ClockTime = 488 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.9479e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 728 | t 0.00727 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007270 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007270 was stored. Time = 0.00728 DICPBiCGStab: Solving for T, Initial residual = 0.00023837, Final residual = 1.71792e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.71825e-08, Final residual = 1.71825e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.71825e-08, Final residual = 1.71825e-08, No Iterations 0 ExecutionTime = 13.64 s ClockTime = 489 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.94633e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 729 | t 0.00728 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007280 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007280 was stored. Time = 0.00729 DICPBiCGStab: Solving for T, Initial residual = 0.000238394, Final residual = 1.71783e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.71816e-08, Final residual = 1.71816e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.71816e-08, Final residual = 1.71816e-08, No Iterations 0 ExecutionTime = 13.65 s ClockTime = 489 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.94478e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 730 | t 0.00729 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007290 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007290 was stored. Time = 0.0073 DICPBiCGStab: Solving for T, Initial residual = 0.000238406, Final residual = 1.71764e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.71797e-08, Final residual = 1.71797e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.71797e-08, Final residual = 1.71797e-08, No Iterations 0 ExecutionTime = 13.67 s ClockTime = 490 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.94325e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 731 | t 0.0073 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007300 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007300 was stored. Time = 0.00731 DICPBiCGStab: Solving for T, Initial residual = 0.000238378, Final residual = 1.71713e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.71744e-08, Final residual = 1.71744e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.71744e-08, Final residual = 1.71744e-08, No Iterations 0 ExecutionTime = 13.68 s ClockTime = 491 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.94141e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 732 | t 0.00731 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007310 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007310 was stored. Time = 0.00732 DICPBiCGStab: Solving for T, Initial residual = 0.000238339, Final residual = 1.7165e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.71679e-08, Final residual = 1.71679e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.71679e-08, Final residual = 1.71679e-08, No Iterations 0 ExecutionTime = 13.7 s ClockTime = 491 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.93957e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 733 | t 0.00732 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007320 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007320 was stored. Time = 0.00733 DICPBiCGStab: Solving for T, Initial residual = 0.000238289, Final residual = 1.71577e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.71605e-08, Final residual = 1.71605e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.71605e-08, Final residual = 1.71605e-08, No Iterations 0 ExecutionTime = 13.71 s ClockTime = 492 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.93778e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 734 | t 0.00733 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007330 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007330 was stored. Time = 0.00734 DICPBiCGStab: Solving for T, Initial residual = 0.000238189, Final residual = 1.71473e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.715e-08, Final residual = 1.715e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.715e-08, Final residual = 1.715e-08, No Iterations 0 ExecutionTime = 13.73 s ClockTime = 493 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.93559e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 735 | t 0.00734 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007340 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007340 was stored. Time = 0.00735 DICPBiCGStab: Solving for T, Initial residual = 0.000238065, Final residual = 1.71355e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.71379e-08, Final residual = 1.71379e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.71379e-08, Final residual = 1.71379e-08, No Iterations 0 ExecutionTime = 13.75 s ClockTime = 493 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.93323e-07, limit = 1e-06, normalization = 27179.3, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 736 | t 0.00735 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007350 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007350 was stored. Time = 0.00736 DICPBiCGStab: Solving for T, Initial residual = 0.000237893, Final residual = 1.71193e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.71215e-08, Final residual = 1.71215e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.71215e-08, Final residual = 1.71215e-08, No Iterations 0 ExecutionTime = 13.77 s ClockTime = 494 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.93053e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 737 | t 0.00736 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007360 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007360 was stored. Time = 0.00737 DICPBiCGStab: Solving for T, Initial residual = 0.000237727, Final residual = 1.71039e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.71058e-08, Final residual = 1.71058e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.71058e-08, Final residual = 1.71058e-08, No Iterations 0 ExecutionTime = 13.78 s ClockTime = 494 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.92804e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 738 | t 0.00737 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007370 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007370 was stored. Time = 0.00738 DICPBiCGStab: Solving for T, Initial residual = 0.000237519, Final residual = 1.70848e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.70865e-08, Final residual = 1.70865e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.70865e-08, Final residual = 1.70865e-08, No Iterations 0 ExecutionTime = 13.8 s ClockTime = 495 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.92524e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 739 | t 0.00738 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007380 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007380 was stored. Time = 0.00739 DICPBiCGStab: Solving for T, Initial residual = 0.000237302, Final residual = 1.7065e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.70664e-08, Final residual = 1.70664e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.70664e-08, Final residual = 1.70664e-08, No Iterations 0 ExecutionTime = 13.81 s ClockTime = 496 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.92246e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 740 | t 0.00739 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007390 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007390 was stored. Time = 0.0074 DICPBiCGStab: Solving for T, Initial residual = 0.000237111, Final residual = 1.70469e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.70482e-08, Final residual = 1.70482e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.70482e-08, Final residual = 1.70482e-08, No Iterations 0 ExecutionTime = 13.83 s ClockTime = 496 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.92008e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 741 | t 0.0074 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007400 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007400 was stored. Time = 0.00741 DICPBiCGStab: Solving for T, Initial residual = 0.000236892, Final residual = 1.70273e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.70283e-08, Final residual = 1.70283e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.70283e-08, Final residual = 1.70283e-08, No Iterations 0 ExecutionTime = 13.85 s ClockTime = 497 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.91751e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 742 | t 0.00741 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007410 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007410 was stored. Time = 0.00742 DICPBiCGStab: Solving for T, Initial residual = 0.000236679, Final residual = 1.70088e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.70095e-08, Final residual = 1.70095e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.70095e-08, Final residual = 1.70095e-08, No Iterations 0 ExecutionTime = 13.86 s ClockTime = 498 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.91511e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 743 | t 0.00742 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007420 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007420 was stored. Time = 0.00743 DICPBiCGStab: Solving for T, Initial residual = 0.000236443, Final residual = 1.69883e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.69888e-08, Final residual = 1.69888e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.69888e-08, Final residual = 1.69888e-08, No Iterations 0 ExecutionTime = 13.88 s ClockTime = 498 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.9126e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 744 | t 0.00743 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007430 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007430 was stored. Time = 0.00744 DICPBiCGStab: Solving for T, Initial residual = 0.000236188, Final residual = 1.69664e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.69668e-08, Final residual = 1.69668e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.69668e-08, Final residual = 1.69668e-08, No Iterations 0 ExecutionTime = 13.89 s ClockTime = 499 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.91001e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 745 | t 0.00744 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007440 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007440 was stored. Time = 0.00745 DICPBiCGStab: Solving for T, Initial residual = 0.000235911, Final residual = 1.69434e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.69434e-08, Final residual = 1.69434e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.69434e-08, Final residual = 1.69434e-08, No Iterations 0 ExecutionTime = 13.91 s ClockTime = 500 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.90731e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 746 | t 0.00745 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007450 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007450 was stored. Time = 0.00746 DICPBiCGStab: Solving for T, Initial residual = 0.000235611, Final residual = 1.69185e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.69183e-08, Final residual = 1.69183e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.69183e-08, Final residual = 1.69183e-08, No Iterations 0 ExecutionTime = 13.93 s ClockTime = 500 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.90446e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 747 | t 0.00746 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007460 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007460 was stored. Time = 0.00747 DICPBiCGStab: Solving for T, Initial residual = 0.000235311, Final residual = 1.6895e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.68946e-08, Final residual = 1.68946e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.68946e-08, Final residual = 1.68946e-08, No Iterations 0 ExecutionTime = 13.94 s ClockTime = 501 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.90171e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 748 | t 0.00747 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007470 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007470 was stored. Time = 0.00748 DICPBiCGStab: Solving for T, Initial residual = 0.000234994, Final residual = 1.68699e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.68692e-08, Final residual = 1.68692e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.68692e-08, Final residual = 1.68692e-08, No Iterations 0 ExecutionTime = 13.96 s ClockTime = 501 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.8989e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 749 | t 0.00748 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007480 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007480 was stored. Time = 0.00749 DICPBiCGStab: Solving for T, Initial residual = 0.000234653, Final residual = 1.68435e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.68425e-08, Final residual = 1.68425e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.68425e-08, Final residual = 1.68425e-08, No Iterations 0 ExecutionTime = 13.97 s ClockTime = 502 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.89596e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 750 | t 0.00749 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007490 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007490 was stored. Time = 0.0075 DICPBiCGStab: Solving for T, Initial residual = 0.000234311, Final residual = 1.68172e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.68159e-08, Final residual = 1.68159e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.68159e-08, Final residual = 1.68159e-08, No Iterations 0 ExecutionTime = 13.98 s ClockTime = 503 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.89309e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 751 | t 0.0075 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007500 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007500 was stored. Time = 0.00751 DICPBiCGStab: Solving for T, Initial residual = 0.000233949, Final residual = 1.679e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.67884e-08, Final residual = 1.67884e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.67884e-08, Final residual = 1.67884e-08, No Iterations 0 ExecutionTime = 14 s ClockTime = 503 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.89013e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 752 | t 0.00751 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007510 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007510 was stored. Time = 0.00752 DICPBiCGStab: Solving for T, Initial residual = 0.000233588, Final residual = 1.6763e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.67611e-08, Final residual = 1.67611e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.67611e-08, Final residual = 1.67611e-08, No Iterations 0 ExecutionTime = 14.02 s ClockTime = 504 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.88724e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 753 | t 0.00752 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007520 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007520 was stored. Time = 0.00753 DICPBiCGStab: Solving for T, Initial residual = 0.000233201, Final residual = 1.67354e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.67332e-08, Final residual = 1.67332e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.67332e-08, Final residual = 1.67332e-08, No Iterations 0 ExecutionTime = 14.04 s ClockTime = 505 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.88421e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 754 | t 0.00753 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007530 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007530 was stored. Time = 0.00754 DICPBiCGStab: Solving for T, Initial residual = 0.000232819, Final residual = 1.67091e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.67069e-08, Final residual = 1.67069e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.67069e-08, Final residual = 1.67069e-08, No Iterations 0 ExecutionTime = 14.05 s ClockTime = 505 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.8813e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 755 | t 0.00754 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007540 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007540 was stored. Time = 0.00755 DICPBiCGStab: Solving for T, Initial residual = 0.000232447, Final residual = 1.66841e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.6682e-08, Final residual = 1.6682e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.6682e-08, Final residual = 1.6682e-08, No Iterations 0 ExecutionTime = 14.07 s ClockTime = 506 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.87855e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 756 | t 0.00755 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007550 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007550 was stored. Time = 0.00756 DICPBiCGStab: Solving for T, Initial residual = 0.000232054, Final residual = 1.66574e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.66553e-08, Final residual = 1.66553e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.66553e-08, Final residual = 1.66553e-08, No Iterations 0 ExecutionTime = 14.09 s ClockTime = 507 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.87566e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 757 | t 0.00756 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007560 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007560 was stored. Time = 0.00757 DICPBiCGStab: Solving for T, Initial residual = 0.000231618, Final residual = 1.663e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.66278e-08, Final residual = 1.66278e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.66278e-08, Final residual = 1.66278e-08, No Iterations 0 ExecutionTime = 14.1 s ClockTime = 507 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.87244e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 758 | t 0.00757 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007570 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007570 was stored. Time = 0.00758 DICPBiCGStab: Solving for T, Initial residual = 0.000231169, Final residual = 1.66015e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.65993e-08, Final residual = 1.65993e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.65993e-08, Final residual = 1.65993e-08, No Iterations 0 ExecutionTime = 14.12 s ClockTime = 508 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.86912e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 759 | t 0.00758 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007580 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007580 was stored. Time = 0.00759 DICPBiCGStab: Solving for T, Initial residual = 0.000230729, Final residual = 1.6573e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.65708e-08, Final residual = 1.65708e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.65708e-08, Final residual = 1.65708e-08, No Iterations 0 ExecutionTime = 14.13 s ClockTime = 509 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.86597e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 760 | t 0.00759 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007590 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007590 was stored. Time = 0.0076 DICPBiCGStab: Solving for T, Initial residual = 0.000230292, Final residual = 1.65442e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.65419e-08, Final residual = 1.65419e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.65419e-08, Final residual = 1.65419e-08, No Iterations 0 ExecutionTime = 14.14 s ClockTime = 509 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.86293e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 761 | t 0.0076 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007600 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007600 was stored. Time = 0.00761 DICPBiCGStab: Solving for T, Initial residual = 0.000229855, Final residual = 1.65155e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.65131e-08, Final residual = 1.65131e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.65131e-08, Final residual = 1.65131e-08, No Iterations 0 ExecutionTime = 14.16 s ClockTime = 510 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.85996e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 762 | t 0.00761 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007610 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007610 was stored. Time = 0.00762 DICPBiCGStab: Solving for T, Initial residual = 0.000229415, Final residual = 1.64868e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.64844e-08, Final residual = 1.64844e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.64844e-08, Final residual = 1.64844e-08, No Iterations 0 ExecutionTime = 14.17 s ClockTime = 510 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.85702e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 763 | t 0.00762 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007620 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007620 was stored. Time = 0.00763 DICPBiCGStab: Solving for T, Initial residual = 0.000228956, Final residual = 1.64564e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.64541e-08, Final residual = 1.64541e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.64541e-08, Final residual = 1.64541e-08, No Iterations 0 ExecutionTime = 14.19 s ClockTime = 511 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.85397e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 764 | t 0.00763 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007630 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007630 was stored. Time = 0.00764 DICPBiCGStab: Solving for T, Initial residual = 0.000228499, Final residual = 1.64255e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.64231e-08, Final residual = 1.64231e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.64231e-08, Final residual = 1.64231e-08, No Iterations 0 ExecutionTime = 14.21 s ClockTime = 512 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.85097e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 765 | t 0.00764 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007640 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007640 was stored. Time = 0.00765 DICPBiCGStab: Solving for T, Initial residual = 0.000228038, Final residual = 1.63957e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.63932e-08, Final residual = 1.63932e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.63932e-08, Final residual = 1.63932e-08, No Iterations 0 ExecutionTime = 14.22 s ClockTime = 512 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.84795e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 766 | t 0.00765 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007650 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007650 was stored. Time = 0.00766 DICPBiCGStab: Solving for T, Initial residual = 0.000227538, Final residual = 1.63622e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.63597e-08, Final residual = 1.63597e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.63597e-08, Final residual = 1.63597e-08, No Iterations 0 ExecutionTime = 14.24 s ClockTime = 513 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.84467e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 767 | t 0.00766 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007660 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007660 was stored. Time = 0.00767 DICPBiCGStab: Solving for T, Initial residual = 0.000227012, Final residual = 1.6327e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.63244e-08, Final residual = 1.63244e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.63244e-08, Final residual = 1.63244e-08, No Iterations 0 ExecutionTime = 14.25 s ClockTime = 514 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.84122e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 768 | t 0.00767 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007670 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007670 was stored. Time = 0.00768 DICPBiCGStab: Solving for T, Initial residual = 0.000226482, Final residual = 1.62903e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.62877e-08, Final residual = 1.62877e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.62877e-08, Final residual = 1.62877e-08, No Iterations 0 ExecutionTime = 14.27 s ClockTime = 514 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.83777e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 769 | t 0.00768 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007680 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007680 was stored. Time = 0.00769 DICPBiCGStab: Solving for T, Initial residual = 0.000225969, Final residual = 1.62552e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.62527e-08, Final residual = 1.62527e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.62527e-08, Final residual = 1.62527e-08, No Iterations 0 ExecutionTime = 14.29 s ClockTime = 515 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.83451e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 770 | t 0.00769 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007690 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007690 was stored. Time = 0.0077 DICPBiCGStab: Solving for T, Initial residual = 0.000225446, Final residual = 1.62198e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.62173e-08, Final residual = 1.62173e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.62173e-08, Final residual = 1.62173e-08, No Iterations 0 ExecutionTime = 14.3 s ClockTime = 516 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.83123e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 771 | t 0.0077 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007700 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007700 was stored. Time = 0.00771 DICPBiCGStab: Solving for T, Initial residual = 0.000224909, Final residual = 1.61839e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.61813e-08, Final residual = 1.61813e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.61813e-08, Final residual = 1.61813e-08, No Iterations 0 ExecutionTime = 14.32 s ClockTime = 516 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.82788e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 772 | t 0.00771 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007710 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007710 was stored. Time = 0.00772 DICPBiCGStab: Solving for T, Initial residual = 0.000224367, Final residual = 1.61472e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.61445e-08, Final residual = 1.61445e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.61445e-08, Final residual = 1.61445e-08, No Iterations 0 ExecutionTime = 14.34 s ClockTime = 517 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.82449e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 773 | t 0.00772 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007720 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007720 was stored. Time = 0.00773 DICPBiCGStab: Solving for T, Initial residual = 0.000223834, Final residual = 1.61109e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.61081e-08, Final residual = 1.61081e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.61081e-08, Final residual = 1.61081e-08, No Iterations 0 ExecutionTime = 14.36 s ClockTime = 517 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.82122e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 774 | t 0.00773 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007730 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007730 was stored. Time = 0.00774 DICPBiCGStab: Solving for T, Initial residual = 0.000223306, Final residual = 1.60746e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.60718e-08, Final residual = 1.60718e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.60718e-08, Final residual = 1.60718e-08, No Iterations 0 ExecutionTime = 14.37 s ClockTime = 518 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.81804e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 775 | t 0.00774 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007740 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007740 was stored. Time = 0.00775 DICPBiCGStab: Solving for T, Initial residual = 0.000222759, Final residual = 1.60399e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.60372e-08, Final residual = 1.60372e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.60372e-08, Final residual = 1.60372e-08, No Iterations 0 ExecutionTime = 14.39 s ClockTime = 519 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.81477e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 776 | t 0.00775 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007750 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007750 was stored. Time = 0.00776 DICPBiCGStab: Solving for T, Initial residual = 0.00022222, Final residual = 1.60072e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.60044e-08, Final residual = 1.60044e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.60044e-08, Final residual = 1.60044e-08, No Iterations 0 ExecutionTime = 14.4 s ClockTime = 519 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.81158e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 777 | t 0.00776 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007760 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007760 was stored. Time = 0.00777 DICPBiCGStab: Solving for T, Initial residual = 0.000221648, Final residual = 1.5972e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.59692e-08, Final residual = 1.59692e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.59692e-08, Final residual = 1.59692e-08, No Iterations 0 ExecutionTime = 14.41 s ClockTime = 520 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.80818e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 778 | t 0.00777 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007770 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007770 was stored. Time = 0.00778 DICPBiCGStab: Solving for T, Initial residual = 0.000221093, Final residual = 1.59375e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.59347e-08, Final residual = 1.59347e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.59347e-08, Final residual = 1.59347e-08, No Iterations 0 ExecutionTime = 14.44 s ClockTime = 521 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.80487e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 779 | t 0.00778 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007780 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007780 was stored. Time = 0.00779 DICPBiCGStab: Solving for T, Initial residual = 0.00022051, Final residual = 1.59005e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.58976e-08, Final residual = 1.58976e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.58976e-08, Final residual = 1.58976e-08, No Iterations 0 ExecutionTime = 14.45 s ClockTime = 521 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.80139e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 780 | t 0.00779 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007790 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007790 was stored. Time = 0.0078 DICPBiCGStab: Solving for T, Initial residual = 0.000219936, Final residual = 1.58638e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.58609e-08, Final residual = 1.58609e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.58609e-08, Final residual = 1.58609e-08, No Iterations 0 ExecutionTime = 14.47 s ClockTime = 522 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.798e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 781 | t 0.0078 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007800 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007800 was stored. Time = 0.00781 DICPBiCGStab: Solving for T, Initial residual = 0.000219326, Final residual = 1.58252e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.58222e-08, Final residual = 1.58222e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.58222e-08, Final residual = 1.58222e-08, No Iterations 0 ExecutionTime = 14.48 s ClockTime = 523 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.79442e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 782 | t 0.00781 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007810 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007810 was stored. Time = 0.00782 DICPBiCGStab: Solving for T, Initial residual = 0.000218744, Final residual = 1.57905e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.57876e-08, Final residual = 1.57876e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.57876e-08, Final residual = 1.57876e-08, No Iterations 0 ExecutionTime = 14.49 s ClockTime = 523 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.79103e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 783 | t 0.00782 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007820 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007820 was stored. Time = 0.00783 DICPBiCGStab: Solving for T, Initial residual = 0.000218168, Final residual = 1.5758e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.57549e-08, Final residual = 1.57549e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.57549e-08, Final residual = 1.57549e-08, No Iterations 0 ExecutionTime = 14.51 s ClockTime = 524 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.7877e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 784 | t 0.00783 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007830 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007830 was stored. Time = 0.00784 DICPBiCGStab: Solving for T, Initial residual = 0.00021759, Final residual = 1.57263e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.57233e-08, Final residual = 1.57233e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.57233e-08, Final residual = 1.57233e-08, No Iterations 0 ExecutionTime = 14.53 s ClockTime = 525 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.7844e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 785 | t 0.00784 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007840 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007840 was stored. Time = 0.00785 DICPBiCGStab: Solving for T, Initial residual = 0.000216998, Final residual = 1.5696e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.5693e-08, Final residual = 1.5693e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.5693e-08, Final residual = 1.5693e-08, No Iterations 0 ExecutionTime = 14.54 s ClockTime = 525 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.78105e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 786 | t 0.00785 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007850 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007850 was stored. Time = 0.00786 DICPBiCGStab: Solving for T, Initial residual = 0.000216408, Final residual = 1.56672e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.56641e-08, Final residual = 1.56641e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.56641e-08, Final residual = 1.56641e-08, No Iterations 0 ExecutionTime = 14.56 s ClockTime = 526 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.77774e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 787 | t 0.00786 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007860 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007860 was stored. Time = 0.00787 DICPBiCGStab: Solving for T, Initial residual = 0.000215821, Final residual = 1.56383e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.56353e-08, Final residual = 1.56353e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.56353e-08, Final residual = 1.56353e-08, No Iterations 0 ExecutionTime = 14.58 s ClockTime = 526 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.77444e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 788 | t 0.00787 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007870 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007870 was stored. Time = 0.00788 DICPBiCGStab: Solving for T, Initial residual = 0.000215207, Final residual = 1.56076e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.56045e-08, Final residual = 1.56045e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.56045e-08, Final residual = 1.56045e-08, No Iterations 0 ExecutionTime = 14.59 s ClockTime = 527 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.77098e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 789 | t 0.00788 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007880 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007880 was stored. Time = 0.00789 DICPBiCGStab: Solving for T, Initial residual = 0.000214577, Final residual = 1.55763e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.55731e-08, Final residual = 1.55731e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.55731e-08, Final residual = 1.55731e-08, No Iterations 0 ExecutionTime = 14.61 s ClockTime = 528 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.76743e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 790 | t 0.00789 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007890 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007890 was stored. Time = 0.0079 DICPBiCGStab: Solving for T, Initial residual = 0.000213963, Final residual = 1.55459e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.55427e-08, Final residual = 1.55427e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.55427e-08, Final residual = 1.55427e-08, No Iterations 0 ExecutionTime = 14.62 s ClockTime = 528 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.76397e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 791 | t 0.0079 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007900 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007900 was stored. Time = 0.00791 DICPBiCGStab: Solving for T, Initial residual = 0.000213365, Final residual = 1.55168e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.55136e-08, Final residual = 1.55136e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.55136e-08, Final residual = 1.55136e-08, No Iterations 0 ExecutionTime = 14.63 s ClockTime = 529 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.76069e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 792 | t 0.00791 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007910 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007910 was stored. Time = 0.00792 DICPBiCGStab: Solving for T, Initial residual = 0.000212779, Final residual = 1.54907e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.54875e-08, Final residual = 1.54875e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.54875e-08, Final residual = 1.54875e-08, No Iterations 0 ExecutionTime = 14.65 s ClockTime = 530 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.75752e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 793 | t 0.00792 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007920 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007920 was stored. Time = 0.00793 DICPBiCGStab: Solving for T, Initial residual = 0.000212134, Final residual = 1.54606e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.54575e-08, Final residual = 1.54575e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.54575e-08, Final residual = 1.54575e-08, No Iterations 0 ExecutionTime = 14.67 s ClockTime = 530 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.75402e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 794 | t 0.00793 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007930 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007930 was stored. Time = 0.00794 DICPBiCGStab: Solving for T, Initial residual = 0.000211492, Final residual = 1.54312e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.54281e-08, Final residual = 1.54281e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.54281e-08, Final residual = 1.54281e-08, No Iterations 0 ExecutionTime = 14.69 s ClockTime = 531 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.75049e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 795 | t 0.00794 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007940 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007940 was stored. Time = 0.00795 DICPBiCGStab: Solving for T, Initial residual = 0.000210826, Final residual = 1.53994e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.53963e-08, Final residual = 1.53963e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.53963e-08, Final residual = 1.53963e-08, No Iterations 0 ExecutionTime = 14.7 s ClockTime = 532 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.74679e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 796 | t 0.00795 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007950 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007950 was stored. Time = 0.00796 DICPBiCGStab: Solving for T, Initial residual = 0.000210154, Final residual = 1.53667e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.53634e-08, Final residual = 1.53634e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.53634e-08, Final residual = 1.53634e-08, No Iterations 0 ExecutionTime = 14.72 s ClockTime = 532 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.74301e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 797 | t 0.00796 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007960 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007960 was stored. Time = 0.00797 DICPBiCGStab: Solving for T, Initial residual = 0.000209483, Final residual = 1.53331e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.53298e-08, Final residual = 1.53298e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.53298e-08, Final residual = 1.53298e-08, No Iterations 0 ExecutionTime = 14.74 s ClockTime = 533 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.73925e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 798 | t 0.00797 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007970 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007970 was stored. Time = 0.00798 DICPBiCGStab: Solving for T, Initial residual = 0.000208824, Final residual = 1.52999e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.52966e-08, Final residual = 1.52966e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.52966e-08, Final residual = 1.52966e-08, No Iterations 0 ExecutionTime = 14.75 s ClockTime = 534 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.73561e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 799 | t 0.00798 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007980 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007980 was stored. Time = 0.00799 DICPBiCGStab: Solving for T, Initial residual = 0.000208163, Final residual = 1.52661e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.52628e-08, Final residual = 1.52628e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.52628e-08, Final residual = 1.52628e-08, No Iterations 0 ExecutionTime = 14.76 s ClockTime = 534 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.732e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 800 | t 0.00799 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.007990 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.007990 was stored. Time = 0.008 DICPBiCGStab: Solving for T, Initial residual = 0.000207527, Final residual = 1.52336e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.52303e-08, Final residual = 1.52303e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.52303e-08, Final residual = 1.52303e-08, No Iterations 0 ExecutionTime = 14.87 s ClockTime = 535 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.72856e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 801 | t 0.008 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008000 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008000 was stored. ---[preciceAdapter] The coupling timestep completed. Writing the updated results. Time = 0.00801 DICPBiCGStab: Solving for T, Initial residual = 0.000206889, Final residual = 1.52006e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.51973e-08, Final residual = 1.51973e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.51973e-08, Final residual = 1.51973e-08, No Iterations 0 ExecutionTime = 14.9 s ClockTime = 537 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.72517e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 802 | t 0.00801 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008010 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008010 was stored. Time = 0.00802 DICPBiCGStab: Solving for T, Initial residual = 0.000206257, Final residual = 1.51674e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.51641e-08, Final residual = 1.51641e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.51641e-08, Final residual = 1.51641e-08, No Iterations 0 ExecutionTime = 14.91 s ClockTime = 537 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.72182e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 803 | t 0.00802 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008020 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008020 was stored. Time = 0.00803 DICPBiCGStab: Solving for T, Initial residual = 0.000205624, Final residual = 1.51335e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.51301e-08, Final residual = 1.51301e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.51301e-08, Final residual = 1.51301e-08, No Iterations 0 ExecutionTime = 14.93 s ClockTime = 538 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.71844e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 804 | t 0.00803 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008030 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008030 was stored. Time = 0.00804 DICPBiCGStab: Solving for T, Initial residual = 0.000204984, Final residual = 1.50985e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.50952e-08, Final residual = 1.50952e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.50952e-08, Final residual = 1.50952e-08, No Iterations 0 ExecutionTime = 14.94 s ClockTime = 539 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.71502e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 805 | t 0.00804 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008040 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008040 was stored. Time = 0.00805 DICPBiCGStab: Solving for T, Initial residual = 0.000204319, Final residual = 1.50611e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.50578e-08, Final residual = 1.50578e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.50578e-08, Final residual = 1.50578e-08, No Iterations 0 ExecutionTime = 14.96 s ClockTime = 539 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.7115e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 806 | t 0.00805 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008050 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008050 was stored. Time = 0.00806 DICPBiCGStab: Solving for T, Initial residual = 0.000203628, Final residual = 1.50211e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.50178e-08, Final residual = 1.50178e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.50178e-08, Final residual = 1.50178e-08, No Iterations 0 ExecutionTime = 14.98 s ClockTime = 540 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.70781e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 807 | t 0.00806 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008060 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008060 was stored. Time = 0.00807 DICPBiCGStab: Solving for T, Initial residual = 0.00020296, Final residual = 1.49824e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.49791e-08, Final residual = 1.49791e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.49791e-08, Final residual = 1.49791e-08, No Iterations 0 ExecutionTime = 14.99 s ClockTime = 541 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.70423e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 808 | t 0.00807 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008070 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008070 was stored. Time = 0.00808 DICPBiCGStab: Solving for T, Initial residual = 0.000202311, Final residual = 1.49444e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.4941e-08, Final residual = 1.4941e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.4941e-08, Final residual = 1.4941e-08, No Iterations 0 ExecutionTime = 15.01 s ClockTime = 541 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.70079e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 809 | t 0.00808 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008080 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008080 was stored. Time = 0.00809 DICPBiCGStab: Solving for T, Initial residual = 0.000201664, Final residual = 1.49061e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.49028e-08, Final residual = 1.49028e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.49028e-08, Final residual = 1.49028e-08, No Iterations 0 ExecutionTime = 15.02 s ClockTime = 542 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.6974e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 810 | t 0.00809 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008090 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008090 was stored. Time = 0.0081 DICPBiCGStab: Solving for T, Initial residual = 0.000201023, Final residual = 1.48683e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.48651e-08, Final residual = 1.48651e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.48651e-08, Final residual = 1.48651e-08, No Iterations 0 ExecutionTime = 15.04 s ClockTime = 542 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.69407e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 811 | t 0.0081 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008100 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008100 was stored. Time = 0.00811 DICPBiCGStab: Solving for T, Initial residual = 0.000200364, Final residual = 1.48287e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.48255e-08, Final residual = 1.48255e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.48255e-08, Final residual = 1.48255e-08, No Iterations 0 ExecutionTime = 15.05 s ClockTime = 543 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.69069e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 812 | t 0.00811 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008110 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008110 was stored. Time = 0.00812 DICPBiCGStab: Solving for T, Initial residual = 0.000199694, Final residual = 1.47878e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.47847e-08, Final residual = 1.47847e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.47847e-08, Final residual = 1.47847e-08, No Iterations 0 ExecutionTime = 15.08 s ClockTime = 544 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.6872e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 813 | t 0.00812 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008120 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008120 was stored. Time = 0.00813 DICPBiCGStab: Solving for T, Initial residual = 0.000199027, Final residual = 1.47473e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.47441e-08, Final residual = 1.47441e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.47441e-08, Final residual = 1.47441e-08, No Iterations 0 ExecutionTime = 15.09 s ClockTime = 544 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.68369e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 814 | t 0.00813 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008130 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008130 was stored. Time = 0.00814 DICPBiCGStab: Solving for T, Initial residual = 0.000198368, Final residual = 1.4707e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.47038e-08, Final residual = 1.47038e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.47038e-08, Final residual = 1.47038e-08, No Iterations 0 ExecutionTime = 15.11 s ClockTime = 545 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.68023e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 815 | t 0.00814 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008140 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008140 was stored. Time = 0.00815 DICPBiCGStab: Solving for T, Initial residual = 0.000197699, Final residual = 1.46676e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.46643e-08, Final residual = 1.46643e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.46643e-08, Final residual = 1.46643e-08, No Iterations 0 ExecutionTime = 15.13 s ClockTime = 546 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.67675e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 816 | t 0.00815 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008150 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008150 was stored. Time = 0.00816 DICPBiCGStab: Solving for T, Initial residual = 0.000197019, Final residual = 1.46296e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.46263e-08, Final residual = 1.46263e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.46263e-08, Final residual = 1.46263e-08, No Iterations 0 ExecutionTime = 15.14 s ClockTime = 546 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.67326e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 817 | t 0.00816 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008160 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008160 was stored. Time = 0.00817 DICPBiCGStab: Solving for T, Initial residual = 0.000196351, Final residual = 1.45939e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.45906e-08, Final residual = 1.45906e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.45906e-08, Final residual = 1.45906e-08, No Iterations 0 ExecutionTime = 15.16 s ClockTime = 547 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.66983e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 818 | t 0.00817 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008170 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008170 was stored. Time = 0.00818 DICPBiCGStab: Solving for T, Initial residual = 0.000195669, Final residual = 1.45568e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.45535e-08, Final residual = 1.45535e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.45535e-08, Final residual = 1.45535e-08, No Iterations 0 ExecutionTime = 15.17 s ClockTime = 548 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.66631e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 819 | t 0.00818 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008180 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008180 was stored. Time = 0.00819 DICPBiCGStab: Solving for T, Initial residual = 0.000195004, Final residual = 1.45205e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.45171e-08, Final residual = 1.45171e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.45171e-08, Final residual = 1.45171e-08, No Iterations 0 ExecutionTime = 15.19 s ClockTime = 548 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.66288e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 820 | t 0.00819 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008190 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008190 was stored. Time = 0.0082 DICPBiCGStab: Solving for T, Initial residual = 0.000194331, Final residual = 1.44831e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.44796e-08, Final residual = 1.44796e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.44796e-08, Final residual = 1.44796e-08, No Iterations 0 ExecutionTime = 15.21 s ClockTime = 549 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.65943e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 821 | t 0.0082 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008200 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008200 was stored. Time = 0.00821 DICPBiCGStab: Solving for T, Initial residual = 0.000193668, Final residual = 1.44458e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.44426e-08, Final residual = 1.44426e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.44426e-08, Final residual = 1.44426e-08, No Iterations 0 ExecutionTime = 15.23 s ClockTime = 550 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.65602e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 822 | t 0.00821 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008210 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008210 was stored. Time = 0.00822 DICPBiCGStab: Solving for T, Initial residual = 0.000193011, Final residual = 1.44087e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.44063e-08, Final residual = 1.44063e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.44063e-08, Final residual = 1.44063e-08, No Iterations 0 ExecutionTime = 15.24 s ClockTime = 550 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.65271e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 823 | t 0.00822 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008220 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008220 was stored. Time = 0.00823 DICPBiCGStab: Solving for T, Initial residual = 0.00019236, Final residual = 1.43716e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.437e-08, Final residual = 1.437e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.437e-08, Final residual = 1.437e-08, No Iterations 0 ExecutionTime = 15.25 s ClockTime = 551 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.64945e-07, limit = 1e-06, normalization = 27179.2, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 824 | t 0.00823 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008230 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008230 was stored. Time = 0.00824 DICPBiCGStab: Solving for T, Initial residual = 0.000191692, Final residual = 1.4333e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.43322e-08, Final residual = 1.43322e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.43322e-08, Final residual = 1.43322e-08, No Iterations 0 ExecutionTime = 15.27 s ClockTime = 551 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.64612e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 825 | t 0.00824 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008240 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008240 was stored. Time = 0.00825 DICPBiCGStab: Solving for T, Initial residual = 0.000191007, Final residual = 1.42946e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.42947e-08, Final residual = 1.42947e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.42947e-08, Final residual = 1.42947e-08, No Iterations 0 ExecutionTime = 15.29 s ClockTime = 552 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.64272e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 826 | t 0.00825 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008250 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008250 was stored. Time = 0.00826 DICPBiCGStab: Solving for T, Initial residual = 0.000190334, Final residual = 1.42579e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.42588e-08, Final residual = 1.42588e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.42588e-08, Final residual = 1.42588e-08, No Iterations 0 ExecutionTime = 15.3 s ClockTime = 553 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.63933e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 827 | t 0.00826 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008260 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008260 was stored. Time = 0.00827 DICPBiCGStab: Solving for T, Initial residual = 0.000189654, Final residual = 1.42203e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.4222e-08, Final residual = 1.4222e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.4222e-08, Final residual = 1.4222e-08, No Iterations 0 ExecutionTime = 15.32 s ClockTime = 553 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.63594e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 828 | t 0.00827 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008270 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008270 was stored. Time = 0.00828 DICPBiCGStab: Solving for T, Initial residual = 0.000188941, Final residual = 1.41796e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.41822e-08, Final residual = 1.41822e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.41822e-08, Final residual = 1.41822e-08, No Iterations 0 ExecutionTime = 15.33 s ClockTime = 554 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.6324e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 829 | t 0.00828 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008280 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008280 was stored. Time = 0.00829 DICPBiCGStab: Solving for T, Initial residual = 0.000188249, Final residual = 1.41408e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.41442e-08, Final residual = 1.41442e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.41442e-08, Final residual = 1.41442e-08, No Iterations 0 ExecutionTime = 15.35 s ClockTime = 555 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.62895e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 830 | t 0.00829 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008290 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008290 was stored. Time = 0.0083 DICPBiCGStab: Solving for T, Initial residual = 0.000187571, Final residual = 1.41028e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.4107e-08, Final residual = 1.4107e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.4107e-08, Final residual = 1.4107e-08, No Iterations 0 ExecutionTime = 15.36 s ClockTime = 555 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.62561e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 831 | t 0.0083 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008300 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008300 was stored. Time = 0.00831 DICPBiCGStab: Solving for T, Initial residual = 0.000186908, Final residual = 1.40652e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.40702e-08, Final residual = 1.40702e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.40702e-08, Final residual = 1.40702e-08, No Iterations 0 ExecutionTime = 15.38 s ClockTime = 556 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.62236e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 832 | t 0.00831 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008310 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008310 was stored. Time = 0.00832 DICPBiCGStab: Solving for T, Initial residual = 0.00018623, Final residual = 1.40269e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.40328e-08, Final residual = 1.40328e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.40328e-08, Final residual = 1.40328e-08, No Iterations 0 ExecutionTime = 15.39 s ClockTime = 557 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.61906e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 833 | t 0.00832 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008320 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008320 was stored. Time = 0.00833 DICPBiCGStab: Solving for T, Initial residual = 0.000185498, Final residual = 1.39868e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.39935e-08, Final residual = 1.39935e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.39935e-08, Final residual = 1.39935e-08, No Iterations 0 ExecutionTime = 15.41 s ClockTime = 557 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.61549e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 834 | t 0.00833 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008330 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008330 was stored. Time = 0.00834 DICPBiCGStab: Solving for T, Initial residual = 0.000184783, Final residual = 1.39476e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.39551e-08, Final residual = 1.39551e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.39551e-08, Final residual = 1.39551e-08, No Iterations 0 ExecutionTime = 15.43 s ClockTime = 558 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.61194e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 835 | t 0.00834 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008340 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008340 was stored. Time = 0.00835 DICPBiCGStab: Solving for T, Initial residual = 0.000184055, Final residual = 1.39087e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.39171e-08, Final residual = 1.39171e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.39171e-08, Final residual = 1.39171e-08, No Iterations 0 ExecutionTime = 15.44 s ClockTime = 559 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.60839e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 836 | t 0.00835 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008350 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008350 was stored. Time = 0.00836 DICPBiCGStab: Solving for T, Initial residual = 0.000183324, Final residual = 1.3869e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.38781e-08, Final residual = 1.38781e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.38781e-08, Final residual = 1.38781e-08, No Iterations 0 ExecutionTime = 15.46 s ClockTime = 559 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.60486e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 837 | t 0.00836 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008360 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008360 was stored. Time = 0.00837 DICPBiCGStab: Solving for T, Initial residual = 0.000182626, Final residual = 1.3832e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.3842e-08, Final residual = 1.3842e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.3842e-08, Final residual = 1.3842e-08, No Iterations 0 ExecutionTime = 15.47 s ClockTime = 560 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.60141e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 838 | t 0.00837 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008370 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008370 was stored. Time = 0.00838 DICPBiCGStab: Solving for T, Initial residual = 0.000181949, Final residual = 1.37968e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.38076e-08, Final residual = 1.38076e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.38076e-08, Final residual = 1.38076e-08, No Iterations 0 ExecutionTime = 15.49 s ClockTime = 561 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.59811e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 839 | t 0.00838 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008380 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008380 was stored. Time = 0.00839 DICPBiCGStab: Solving for T, Initial residual = 0.000181282, Final residual = 1.37624e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.37739e-08, Final residual = 1.37739e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.37739e-08, Final residual = 1.37739e-08, No Iterations 0 ExecutionTime = 15.5 s ClockTime = 561 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.5949e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 840 | t 0.00839 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008390 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008390 was stored. Time = 0.0084 DICPBiCGStab: Solving for T, Initial residual = 0.000180582, Final residual = 1.37251e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.37375e-08, Final residual = 1.37375e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.37375e-08, Final residual = 1.37375e-08, No Iterations 0 ExecutionTime = 15.52 s ClockTime = 562 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.59164e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 841 | t 0.0084 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008400 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008400 was stored. Time = 0.00841 DICPBiCGStab: Solving for T, Initial residual = 0.000179878, Final residual = 1.36871e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.37003e-08, Final residual = 1.37003e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.37003e-08, Final residual = 1.37003e-08, No Iterations 0 ExecutionTime = 15.53 s ClockTime = 563 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.58831e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 842 | t 0.00841 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008410 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008410 was stored. Time = 0.00842 DICPBiCGStab: Solving for T, Initial residual = 0.000179149, Final residual = 1.36473e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.36612e-08, Final residual = 1.36612e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.36612e-08, Final residual = 1.36612e-08, No Iterations 0 ExecutionTime = 15.55 s ClockTime = 563 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.58486e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 843 | t 0.00842 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008420 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008420 was stored. Time = 0.00843 DICPBiCGStab: Solving for T, Initial residual = 0.000178416, Final residual = 1.36062e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.36209e-08, Final residual = 1.36209e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.36209e-08, Final residual = 1.36209e-08, No Iterations 0 ExecutionTime = 15.57 s ClockTime = 564 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.58135e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 844 | t 0.00843 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008430 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008430 was stored. Time = 0.00844 DICPBiCGStab: Solving for T, Initial residual = 0.000177701, Final residual = 1.35666e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.35819e-08, Final residual = 1.35819e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.35819e-08, Final residual = 1.35819e-08, No Iterations 0 ExecutionTime = 15.58 s ClockTime = 564 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.57792e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 845 | t 0.00844 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008440 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008440 was stored. Time = 0.00845 DICPBiCGStab: Solving for T, Initial residual = 0.000177001, Final residual = 1.35275e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.35436e-08, Final residual = 1.35436e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.35436e-08, Final residual = 1.35436e-08, No Iterations 0 ExecutionTime = 15.6 s ClockTime = 565 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.57458e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 846 | t 0.00845 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008450 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008450 was stored. Time = 0.00846 DICPBiCGStab: Solving for T, Initial residual = 0.00017631, Final residual = 1.34888e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.35058e-08, Final residual = 1.35058e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.35058e-08, Final residual = 1.35058e-08, No Iterations 0 ExecutionTime = 15.61 s ClockTime = 566 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.57132e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 847 | t 0.00846 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008460 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008460 was stored. Time = 0.00847 DICPBiCGStab: Solving for T, Initial residual = 0.000175609, Final residual = 1.34488e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.34666e-08, Final residual = 1.34666e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.34666e-08, Final residual = 1.34666e-08, No Iterations 0 ExecutionTime = 15.63 s ClockTime = 566 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.56807e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 848 | t 0.00847 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008470 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008470 was stored. Time = 0.00848 DICPBiCGStab: Solving for T, Initial residual = 0.000174915, Final residual = 1.34087e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.34273e-08, Final residual = 1.34273e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.34273e-08, Final residual = 1.34273e-08, No Iterations 0 ExecutionTime = 15.65 s ClockTime = 567 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.56486e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 849 | t 0.00848 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008480 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008480 was stored. Time = 0.00849 DICPBiCGStab: Solving for T, Initial residual = 0.000174229, Final residual = 1.33683e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.33877e-08, Final residual = 1.33877e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.33877e-08, Final residual = 1.33877e-08, No Iterations 0 ExecutionTime = 15.66 s ClockTime = 568 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.56169e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 850 | t 0.00849 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008490 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008490 was stored. Time = 0.0085 DICPBiCGStab: Solving for T, Initial residual = 0.000173546, Final residual = 1.33273e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.33474e-08, Final residual = 1.33474e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.33474e-08, Final residual = 1.33474e-08, No Iterations 0 ExecutionTime = 15.68 s ClockTime = 568 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.55856e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 851 | t 0.0085 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008500 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008500 was stored. Time = 0.00851 DICPBiCGStab: Solving for T, Initial residual = 0.000172861, Final residual = 1.32851e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.33059e-08, Final residual = 1.33059e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.33059e-08, Final residual = 1.33059e-08, No Iterations 0 ExecutionTime = 15.69 s ClockTime = 569 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.55546e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 852 | t 0.00851 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008510 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008510 was stored. Time = 0.00852 DICPBiCGStab: Solving for T, Initial residual = 0.000172167, Final residual = 1.32416e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.32632e-08, Final residual = 1.32632e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.32632e-08, Final residual = 1.32632e-08, No Iterations 0 ExecutionTime = 15.71 s ClockTime = 569 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.55232e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 853 | t 0.00852 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008520 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008520 was stored. Time = 0.00853 DICPBiCGStab: Solving for T, Initial residual = 0.000171446, Final residual = 1.31962e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.32185e-08, Final residual = 1.32185e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.32185e-08, Final residual = 1.32185e-08, No Iterations 0 ExecutionTime = 15.73 s ClockTime = 570 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.54907e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 854 | t 0.00853 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008530 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008530 was stored. Time = 0.00854 DICPBiCGStab: Solving for T, Initial residual = 0.000170731, Final residual = 1.31505e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.31737e-08, Final residual = 1.31737e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.31737e-08, Final residual = 1.31737e-08, No Iterations 0 ExecutionTime = 15.74 s ClockTime = 571 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.54584e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 855 | t 0.00854 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008540 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008540 was stored. Time = 0.00855 DICPBiCGStab: Solving for T, Initial residual = 0.000170018, Final residual = 1.31048e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.31288e-08, Final residual = 1.31288e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.31288e-08, Final residual = 1.31288e-08, No Iterations 0 ExecutionTime = 15.76 s ClockTime = 571 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.54264e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 856 | t 0.00855 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008550 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008550 was stored. Time = 0.00856 DICPBiCGStab: Solving for T, Initial residual = 0.000169294, Final residual = 1.30579e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.30826e-08, Final residual = 1.30826e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.30826e-08, Final residual = 1.30826e-08, No Iterations 0 ExecutionTime = 15.77 s ClockTime = 572 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.53944e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 857 | t 0.00856 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008560 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008560 was stored. Time = 0.00857 DICPBiCGStab: Solving for T, Initial residual = 0.000168556, Final residual = 1.30095e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.30349e-08, Final residual = 1.30349e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.30349e-08, Final residual = 1.30349e-08, No Iterations 0 ExecutionTime = 15.79 s ClockTime = 572 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.53618e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 858 | t 0.00857 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008570 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008570 was stored. Time = 0.00858 DICPBiCGStab: Solving for T, Initial residual = 0.000167779, Final residual = 1.29576e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.29838e-08, Final residual = 1.29838e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.29838e-08, Final residual = 1.29838e-08, No Iterations 0 ExecutionTime = 15.81 s ClockTime = 573 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.53274e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 859 | t 0.00858 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008580 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008580 was stored. Time = 0.00859 DICPBiCGStab: Solving for T, Initial residual = 0.000167022, Final residual = 1.29067e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.29338e-08, Final residual = 1.29338e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.29338e-08, Final residual = 1.29338e-08, No Iterations 0 ExecutionTime = 15.83 s ClockTime = 574 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.52933e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 860 | t 0.00859 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008590 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008590 was stored. Time = 0.0086 DICPBiCGStab: Solving for T, Initial residual = 0.000166267, Final residual = 1.28558e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.2884e-08, Final residual = 1.2884e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.2884e-08, Final residual = 1.2884e-08, No Iterations 0 ExecutionTime = 15.84 s ClockTime = 574 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.52596e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 861 | t 0.0086 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008600 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008600 was stored. Time = 0.00861 DICPBiCGStab: Solving for T, Initial residual = 0.000165525, Final residual = 1.28055e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.28347e-08, Final residual = 1.28347e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.28347e-08, Final residual = 1.28347e-08, No Iterations 0 ExecutionTime = 15.86 s ClockTime = 575 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.52266e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 862 | t 0.00861 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008610 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008610 was stored. Time = 0.00862 DICPBiCGStab: Solving for T, Initial residual = 0.000164774, Final residual = 1.27536e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.27839e-08, Final residual = 1.27839e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.27839e-08, Final residual = 1.27839e-08, No Iterations 0 ExecutionTime = 15.87 s ClockTime = 576 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.51938e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 863 | t 0.00862 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008620 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008620 was stored. Time = 0.00863 DICPBiCGStab: Solving for T, Initial residual = 0.000164018, Final residual = 1.27004e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.2732e-08, Final residual = 1.2732e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.2732e-08, Final residual = 1.2732e-08, No Iterations 0 ExecutionTime = 15.88 s ClockTime = 576 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.51612e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 864 | t 0.00863 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008630 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008630 was stored. Time = 0.00864 DICPBiCGStab: Solving for T, Initial residual = 0.000163279, Final residual = 1.26481e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.26807e-08, Final residual = 1.26807e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.26807e-08, Final residual = 1.26807e-08, No Iterations 0 ExecutionTime = 15.9 s ClockTime = 577 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.51296e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 865 | t 0.00864 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008640 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008640 was stored. Time = 0.00865 DICPBiCGStab: Solving for T, Initial residual = 0.000162551, Final residual = 1.25964e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.26301e-08, Final residual = 1.26301e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.26301e-08, Final residual = 1.26301e-08, No Iterations 0 ExecutionTime = 15.92 s ClockTime = 578 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.50988e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 866 | t 0.00865 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008650 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008650 was stored. Time = 0.00866 DICPBiCGStab: Solving for T, Initial residual = 0.000161811, Final residual = 1.25432e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.25779e-08, Final residual = 1.25779e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.25779e-08, Final residual = 1.25779e-08, No Iterations 0 ExecutionTime = 15.93 s ClockTime = 578 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.50683e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 867 | t 0.00866 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008660 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008660 was stored. Time = 0.00867 DICPBiCGStab: Solving for T, Initial residual = 0.000161079, Final residual = 1.24901e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.25255e-08, Final residual = 1.25255e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.25255e-08, Final residual = 1.25255e-08, No Iterations 0 ExecutionTime = 15.95 s ClockTime = 579 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.50381e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 868 | t 0.00867 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008670 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008670 was stored. Time = 0.00868 DICPBiCGStab: Solving for T, Initial residual = 0.000160353, Final residual = 1.2439e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.24745e-08, Final residual = 1.24745e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.24745e-08, Final residual = 1.24745e-08, No Iterations 0 ExecutionTime = 15.97 s ClockTime = 579 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.50081e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 869 | t 0.00868 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008680 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008680 was stored. Time = 0.00869 DICPBiCGStab: Solving for T, Initial residual = 0.0001596, Final residual = 1.2386e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.24216e-08, Final residual = 1.24216e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.24216e-08, Final residual = 1.24216e-08, No Iterations 0 ExecutionTime = 15.98 s ClockTime = 580 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.49773e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 870 | t 0.00869 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008690 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008690 was stored. Time = 0.0087 DICPBiCGStab: Solving for T, Initial residual = 0.000158806, Final residual = 1.23316e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.23672e-08, Final residual = 1.23672e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.23672e-08, Final residual = 1.23672e-08, No Iterations 0 ExecutionTime = 15.99 s ClockTime = 581 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.49453e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 871 | t 0.0087 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008700 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008700 was stored. Time = 0.00871 DICPBiCGStab: Solving for T, Initial residual = 0.00015802, Final residual = 1.22768e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.23125e-08, Final residual = 1.23125e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.23125e-08, Final residual = 1.23125e-08, No Iterations 0 ExecutionTime = 16.02 s ClockTime = 581 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.49127e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 872 | t 0.00871 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008710 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008710 was stored. Time = 0.00872 DICPBiCGStab: Solving for T, Initial residual = 0.000157247, Final residual = 1.22232e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.2259e-08, Final residual = 1.2259e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.2259e-08, Final residual = 1.2259e-08, No Iterations 0 ExecutionTime = 16.03 s ClockTime = 582 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.48802e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 873 | t 0.00872 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008720 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008720 was stored. Time = 0.00873 DICPBiCGStab: Solving for T, Initial residual = 0.000156492, Final residual = 1.21702e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.22066e-08, Final residual = 1.22066e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.22066e-08, Final residual = 1.22066e-08, No Iterations 0 ExecutionTime = 16.05 s ClockTime = 583 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.48485e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 874 | t 0.00873 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008730 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008730 was stored. Time = 0.00874 DICPBiCGStab: Solving for T, Initial residual = 0.000155753, Final residual = 1.21185e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.21563e-08, Final residual = 1.21563e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.21563e-08, Final residual = 1.21563e-08, No Iterations 0 ExecutionTime = 16.06 s ClockTime = 583 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.48182e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 875 | t 0.00874 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008740 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008740 was stored. Time = 0.00875 DICPBiCGStab: Solving for T, Initial residual = 0.000155033, Final residual = 1.20683e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.21076e-08, Final residual = 1.21076e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.21076e-08, Final residual = 1.21076e-08, No Iterations 0 ExecutionTime = 16.08 s ClockTime = 584 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.47891e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 876 | t 0.00875 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008750 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008750 was stored. Time = 0.00876 DICPBiCGStab: Solving for T, Initial residual = 0.000154296, Final residual = 1.20174e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.20581e-08, Final residual = 1.20581e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.20581e-08, Final residual = 1.20581e-08, No Iterations 0 ExecutionTime = 16.09 s ClockTime = 584 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.47603e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 877 | t 0.00876 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008760 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008760 was stored. Time = 0.00877 DICPBiCGStab: Solving for T, Initial residual = 0.000153572, Final residual = 1.1968e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.20101e-08, Final residual = 1.20101e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.20101e-08, Final residual = 1.20101e-08, No Iterations 0 ExecutionTime = 16.11 s ClockTime = 585 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.47309e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 878 | t 0.00877 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008770 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008770 was stored. Time = 0.00878 DICPBiCGStab: Solving for T, Initial residual = 0.000152819, Final residual = 1.19168e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.19605e-08, Final residual = 1.19605e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.19605e-08, Final residual = 1.19605e-08, No Iterations 0 ExecutionTime = 16.13 s ClockTime = 586 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.47003e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 879 | t 0.00878 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008780 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008780 was stored. Time = 0.00879 DICPBiCGStab: Solving for T, Initial residual = 0.000152077, Final residual = 1.18674e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.19124e-08, Final residual = 1.19124e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.19124e-08, Final residual = 1.19124e-08, No Iterations 0 ExecutionTime = 16.14 s ClockTime = 586 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.46689e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 880 | t 0.00879 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008790 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008790 was stored. Time = 0.0088 DICPBiCGStab: Solving for T, Initial residual = 0.000151356, Final residual = 1.18209e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.18674e-08, Final residual = 1.18674e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.18674e-08, Final residual = 1.18674e-08, No Iterations 0 ExecutionTime = 16.16 s ClockTime = 587 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.46377e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 881 | t 0.0088 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008800 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008800 was stored. Time = 0.00881 DICPBiCGStab: Solving for T, Initial residual = 0.000150652, Final residual = 1.17771e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.18244e-08, Final residual = 1.18244e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.18244e-08, Final residual = 1.18244e-08, No Iterations 0 ExecutionTime = 16.17 s ClockTime = 588 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.46069e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 882 | t 0.00881 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008810 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008810 was stored. Time = 0.00882 DICPBiCGStab: Solving for T, Initial residual = 0.000149932, Final residual = 1.17353e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.17831e-08, Final residual = 1.17831e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.17831e-08, Final residual = 1.17831e-08, No Iterations 0 ExecutionTime = 16.19 s ClockTime = 588 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.4576e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 883 | t 0.00882 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008820 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008820 was stored. Time = 0.00883 DICPBiCGStab: Solving for T, Initial residual = 0.000149216, Final residual = 1.1697e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.1744e-08, Final residual = 1.1744e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.1744e-08, Final residual = 1.1744e-08, No Iterations 0 ExecutionTime = 16.21 s ClockTime = 589 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.45451e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 884 | t 0.00883 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008830 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008830 was stored. Time = 0.00884 DICPBiCGStab: Solving for T, Initial residual = 0.000148543, Final residual = 1.1662e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.17075e-08, Final residual = 1.17075e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.17075e-08, Final residual = 1.17075e-08, No Iterations 0 ExecutionTime = 16.22 s ClockTime = 589 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.45148e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 885 | t 0.00884 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008840 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008840 was stored. Time = 0.00885 DICPBiCGStab: Solving for T, Initial residual = 0.000147873, Final residual = 1.1626e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.16703e-08, Final residual = 1.16703e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.16703e-08, Final residual = 1.16703e-08, No Iterations 0 ExecutionTime = 16.23 s ClockTime = 590 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.44854e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 886 | t 0.00885 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008850 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008850 was stored. Time = 0.00886 DICPBiCGStab: Solving for T, Initial residual = 0.000147248, Final residual = 1.15919e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.16355e-08, Final residual = 1.16355e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.16355e-08, Final residual = 1.16355e-08, No Iterations 0 ExecutionTime = 16.25 s ClockTime = 591 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.44563e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 887 | t 0.00886 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008860 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008860 was stored. Time = 0.00887 DICPBiCGStab: Solving for T, Initial residual = 0.00014666, Final residual = 1.15615e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.16043e-08, Final residual = 1.16043e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.16043e-08, Final residual = 1.16043e-08, No Iterations 0 ExecutionTime = 16.27 s ClockTime = 591 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.44279e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 888 | t 0.00887 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008870 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008870 was stored. Time = 0.00888 DICPBiCGStab: Solving for T, Initial residual = 0.0001461, Final residual = 1.15349e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.15769e-08, Final residual = 1.15769e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.15769e-08, Final residual = 1.15769e-08, No Iterations 0 ExecutionTime = 16.28 s ClockTime = 592 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.44006e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 889 | t 0.00888 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008880 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008880 was stored. Time = 0.00889 DICPBiCGStab: Solving for T, Initial residual = 0.000145564, Final residual = 1.15091e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.15502e-08, Final residual = 1.15502e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.15502e-08, Final residual = 1.15502e-08, No Iterations 0 ExecutionTime = 16.3 s ClockTime = 593 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.43738e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 890 | t 0.00889 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008890 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008890 was stored. Time = 0.0089 DICPBiCGStab: Solving for T, Initial residual = 0.00014506, Final residual = 1.14854e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.15254e-08, Final residual = 1.15254e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.15254e-08, Final residual = 1.15254e-08, No Iterations 0 ExecutionTime = 16.31 s ClockTime = 593 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.43472e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 891 | t 0.0089 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008900 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008900 was stored. Time = 0.00891 DICPBiCGStab: Solving for T, Initial residual = 0.000144586, Final residual = 1.14637e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.15022e-08, Final residual = 1.15022e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.15022e-08, Final residual = 1.15022e-08, No Iterations 0 ExecutionTime = 16.33 s ClockTime = 594 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.43207e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 892 | t 0.00891 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008910 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008910 was stored. Time = 0.00892 DICPBiCGStab: Solving for T, Initial residual = 0.000144156, Final residual = 1.14422e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.14785e-08, Final residual = 1.14785e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.14785e-08, Final residual = 1.14785e-08, No Iterations 0 ExecutionTime = 16.34 s ClockTime = 594 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.42947e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 893 | t 0.00892 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008920 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008920 was stored. Time = 0.00893 DICPBiCGStab: Solving for T, Initial residual = 0.000143745, Final residual = 1.14203e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.14549e-08, Final residual = 1.14549e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.14549e-08, Final residual = 1.14549e-08, No Iterations 0 ExecutionTime = 16.37 s ClockTime = 595 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.42685e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 894 | t 0.00893 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008930 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008930 was stored. Time = 0.00894 DICPBiCGStab: Solving for T, Initial residual = 0.000143351, Final residual = 1.1398e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.14305e-08, Final residual = 1.14305e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.14305e-08, Final residual = 1.14305e-08, No Iterations 0 ExecutionTime = 16.38 s ClockTime = 596 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.42425e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 895 | t 0.00894 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008940 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008940 was stored. Time = 0.00895 DICPBiCGStab: Solving for T, Initial residual = 0.000142951, Final residual = 1.13756e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.14059e-08, Final residual = 1.14059e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.14059e-08, Final residual = 1.14059e-08, No Iterations 0 ExecutionTime = 16.4 s ClockTime = 596 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.42162e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 896 | t 0.00895 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008950 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008950 was stored. Time = 0.00896 DICPBiCGStab: Solving for T, Initial residual = 0.00014257, Final residual = 1.1354e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.13822e-08, Final residual = 1.13822e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.13822e-08, Final residual = 1.13822e-08, No Iterations 0 ExecutionTime = 16.41 s ClockTime = 597 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.41899e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 897 | t 0.00896 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008960 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008960 was stored. Time = 0.00897 DICPBiCGStab: Solving for T, Initial residual = 0.000142217, Final residual = 1.13338e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.13599e-08, Final residual = 1.13599e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.13599e-08, Final residual = 1.13599e-08, No Iterations 0 ExecutionTime = 16.43 s ClockTime = 598 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.41638e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 898 | t 0.00897 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008970 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008970 was stored. Time = 0.00898 DICPBiCGStab: Solving for T, Initial residual = 0.000141887, Final residual = 1.13148e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.13388e-08, Final residual = 1.13388e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.13388e-08, Final residual = 1.13388e-08, No Iterations 0 ExecutionTime = 16.44 s ClockTime = 598 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.41384e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 899 | t 0.00898 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008980 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008980 was stored. Time = 0.00899 DICPBiCGStab: Solving for T, Initial residual = 0.000141556, Final residual = 1.12957e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.13174e-08, Final residual = 1.13174e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.13174e-08, Final residual = 1.13174e-08, No Iterations 0 ExecutionTime = 16.46 s ClockTime = 599 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.41138e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 900 | t 0.00899 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.008990 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.008990 was stored. Time = 0.009 DICPBiCGStab: Solving for T, Initial residual = 0.000141239, Final residual = 1.12763e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.12953e-08, Final residual = 1.12953e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.12953e-08, Final residual = 1.12953e-08, No Iterations 0 ExecutionTime = 16.57 s ClockTime = 600 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.40896e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 901 | t 0.009 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009000 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009000 was stored. ---[preciceAdapter] The coupling timestep completed. Writing the updated results. Time = 0.00901 DICPBiCGStab: Solving for T, Initial residual = 0.00014095, Final residual = 1.12595e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.12759e-08, Final residual = 1.12759e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.12759e-08, Final residual = 1.12759e-08, No Iterations 0 ExecutionTime = 16.59 s ClockTime = 601 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.40662e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 902 | t 0.00901 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009010 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009010 was stored. Time = 0.00902 DICPBiCGStab: Solving for T, Initial residual = 0.000140692, Final residual = 1.12466e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.12606e-08, Final residual = 1.12606e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.12606e-08, Final residual = 1.12606e-08, No Iterations 0 ExecutionTime = 16.62 s ClockTime = 602 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.40433e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 903 | t 0.00902 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009020 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009020 was stored. Time = 0.00903 DICPBiCGStab: Solving for T, Initial residual = 0.000140435, Final residual = 1.12331e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.12447e-08, Final residual = 1.12447e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.12447e-08, Final residual = 1.12447e-08, No Iterations 0 ExecutionTime = 16.63 s ClockTime = 602 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.40212e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 904 | t 0.00903 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009030 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009030 was stored. Time = 0.00904 DICPBiCGStab: Solving for T, Initial residual = 0.000140206, Final residual = 1.12243e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.12334e-08, Final residual = 1.12334e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.12334e-08, Final residual = 1.12334e-08, No Iterations 0 ExecutionTime = 16.65 s ClockTime = 603 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.4e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 905 | t 0.00904 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009040 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009040 was stored. Time = 0.00905 DICPBiCGStab: Solving for T, Initial residual = 0.000140021, Final residual = 1.12217e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.12282e-08, Final residual = 1.12282e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.12282e-08, Final residual = 1.12282e-08, No Iterations 0 ExecutionTime = 16.66 s ClockTime = 604 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.39794e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 906 | t 0.00905 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009050 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009050 was stored. Time = 0.00906 DICPBiCGStab: Solving for T, Initial residual = 0.000139836, Final residual = 1.12188e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.12228e-08, Final residual = 1.12228e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.12228e-08, Final residual = 1.12228e-08, No Iterations 0 ExecutionTime = 16.68 s ClockTime = 604 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.39592e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 907 | t 0.00906 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009060 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009060 was stored. Time = 0.00907 DICPBiCGStab: Solving for T, Initial residual = 0.000139663, Final residual = 1.1215e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.12176e-08, Final residual = 1.12176e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.12176e-08, Final residual = 1.12176e-08, No Iterations 0 ExecutionTime = 16.7 s ClockTime = 605 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.39393e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 908 | t 0.00907 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009070 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009070 was stored. Time = 0.00908 DICPBiCGStab: Solving for T, Initial residual = 0.000139498, Final residual = 1.12115e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.12132e-08, Final residual = 1.12132e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.12132e-08, Final residual = 1.12132e-08, No Iterations 0 ExecutionTime = 16.71 s ClockTime = 605 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.39197e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 909 | t 0.00908 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009080 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009080 was stored. Time = 0.00909 DICPBiCGStab: Solving for T, Initial residual = 0.000139363, Final residual = 1.12084e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.12094e-08, Final residual = 1.12094e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.12094e-08, Final residual = 1.12094e-08, No Iterations 0 ExecutionTime = 16.72 s ClockTime = 606 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.39008e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 910 | t 0.00909 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009090 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009090 was stored. Time = 0.0091 DICPBiCGStab: Solving for T, Initial residual = 0.000139222, Final residual = 1.12033e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.12041e-08, Final residual = 1.12041e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.12041e-08, Final residual = 1.12041e-08, No Iterations 0 ExecutionTime = 16.74 s ClockTime = 607 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.38821e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 911 | t 0.0091 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009100 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009100 was stored. Time = 0.00911 DICPBiCGStab: Solving for T, Initial residual = 0.000139098, Final residual = 1.11979e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.11984e-08, Final residual = 1.11984e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.11984e-08, Final residual = 1.11984e-08, No Iterations 0 ExecutionTime = 16.76 s ClockTime = 607 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.38637e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 912 | t 0.00911 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009110 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009110 was stored. Time = 0.00912 DICPBiCGStab: Solving for T, Initial residual = 0.000138996, Final residual = 1.11938e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.11939e-08, Final residual = 1.11939e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.11939e-08, Final residual = 1.11939e-08, No Iterations 0 ExecutionTime = 16.77 s ClockTime = 608 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.38459e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 913 | t 0.00912 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009120 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009120 was stored. Time = 0.00913 DICPBiCGStab: Solving for T, Initial residual = 0.000138907, Final residual = 1.11899e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.11898e-08, Final residual = 1.11898e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.11898e-08, Final residual = 1.11898e-08, No Iterations 0 ExecutionTime = 16.79 s ClockTime = 608 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.3829e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 914 | t 0.00913 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009130 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009130 was stored. Time = 0.00914 DICPBiCGStab: Solving for T, Initial residual = 0.000138849, Final residual = 1.11884e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.1188e-08, Final residual = 1.1188e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.1188e-08, Final residual = 1.1188e-08, No Iterations 0 ExecutionTime = 16.81 s ClockTime = 609 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.38133e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 915 | t 0.00914 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009140 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009140 was stored. Time = 0.00915 DICPBiCGStab: Solving for T, Initial residual = 0.000138821, Final residual = 1.11942e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.11935e-08, Final residual = 1.11935e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.11935e-08, Final residual = 1.11935e-08, No Iterations 0 ExecutionTime = 16.83 s ClockTime = 610 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.37986e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 916 | t 0.00915 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009150 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009150 was stored. Time = 0.00916 DICPBiCGStab: Solving for T, Initial residual = 0.0001388, Final residual = 1.11995e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.11985e-08, Final residual = 1.11985e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.11985e-08, Final residual = 1.11985e-08, No Iterations 0 ExecutionTime = 16.85 s ClockTime = 610 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.37849e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 917 | t 0.00916 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009160 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009160 was stored. Time = 0.00917 DICPBiCGStab: Solving for T, Initial residual = 0.000138791, Final residual = 1.1204e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.12027e-08, Final residual = 1.12027e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.12027e-08, Final residual = 1.12027e-08, No Iterations 0 ExecutionTime = 16.86 s ClockTime = 611 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.37719e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 918 | t 0.00917 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009170 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009170 was stored. Time = 0.00918 DICPBiCGStab: Solving for T, Initial residual = 0.000138782, Final residual = 1.12078e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.12061e-08, Final residual = 1.12061e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.12061e-08, Final residual = 1.12061e-08, No Iterations 0 ExecutionTime = 16.88 s ClockTime = 611 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.37594e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 919 | t 0.00918 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009180 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009180 was stored. Time = 0.00919 DICPBiCGStab: Solving for T, Initial residual = 0.000138794, Final residual = 1.12101e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.12081e-08, Final residual = 1.12081e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.12081e-08, Final residual = 1.12081e-08, No Iterations 0 ExecutionTime = 16.89 s ClockTime = 612 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.37473e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 920 | t 0.00919 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009190 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009190 was stored. Time = 0.0092 DICPBiCGStab: Solving for T, Initial residual = 0.000138824, Final residual = 1.12119e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.12095e-08, Final residual = 1.12095e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.12095e-08, Final residual = 1.12095e-08, No Iterations 0 ExecutionTime = 16.91 s ClockTime = 613 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.37357e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 921 | t 0.0092 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009200 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009200 was stored. Time = 0.00921 DICPBiCGStab: Solving for T, Initial residual = 0.000138866, Final residual = 1.1213e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.12103e-08, Final residual = 1.12103e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.12103e-08, Final residual = 1.12103e-08, No Iterations 0 ExecutionTime = 16.93 s ClockTime = 613 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.37248e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 922 | t 0.00921 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009210 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009210 was stored. Time = 0.00922 DICPBiCGStab: Solving for T, Initial residual = 0.000138912, Final residual = 1.12137e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.12105e-08, Final residual = 1.12105e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.12105e-08, Final residual = 1.12105e-08, No Iterations 0 ExecutionTime = 16.94 s ClockTime = 614 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.37147e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 923 | t 0.00922 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009220 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009220 was stored. Time = 0.00923 DICPBiCGStab: Solving for T, Initial residual = 0.000138971, Final residual = 1.12168e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.12132e-08, Final residual = 1.12132e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.12132e-08, Final residual = 1.12132e-08, No Iterations 0 ExecutionTime = 16.95 s ClockTime = 614 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.37055e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 924 | t 0.00923 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009230 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009230 was stored. Time = 0.00924 DICPBiCGStab: Solving for T, Initial residual = 0.000139054, Final residual = 1.12224e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.12184e-08, Final residual = 1.12184e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.12184e-08, Final residual = 1.12184e-08, No Iterations 0 ExecutionTime = 16.97 s ClockTime = 615 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.36974e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 925 | t 0.00924 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009240 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009240 was stored. Time = 0.00925 DICPBiCGStab: Solving for T, Initial residual = 0.000139155, Final residual = 1.12288e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.12244e-08, Final residual = 1.12244e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.12244e-08, Final residual = 1.12244e-08, No Iterations 0 ExecutionTime = 16.99 s ClockTime = 616 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.36904e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 926 | t 0.00925 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009250 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009250 was stored. Time = 0.00926 DICPBiCGStab: Solving for T, Initial residual = 0.000139266, Final residual = 1.12352e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.12305e-08, Final residual = 1.12305e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.12305e-08, Final residual = 1.12305e-08, No Iterations 0 ExecutionTime = 17 s ClockTime = 616 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.36842e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 927 | t 0.00926 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009260 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009260 was stored. Time = 0.00927 DICPBiCGStab: Solving for T, Initial residual = 0.000139391, Final residual = 1.12432e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.1238e-08, Final residual = 1.1238e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.1238e-08, Final residual = 1.1238e-08, No Iterations 0 ExecutionTime = 17.02 s ClockTime = 617 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.36788e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 928 | t 0.00927 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009270 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009270 was stored. Time = 0.00928 DICPBiCGStab: Solving for T, Initial residual = 0.000139531, Final residual = 1.12518e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.12462e-08, Final residual = 1.12462e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.12462e-08, Final residual = 1.12462e-08, No Iterations 0 ExecutionTime = 17.03 s ClockTime = 618 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.36744e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 929 | t 0.00928 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009280 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009280 was stored. Time = 0.00929 DICPBiCGStab: Solving for T, Initial residual = 0.000139691, Final residual = 1.12608e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.12547e-08, Final residual = 1.12547e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.12547e-08, Final residual = 1.12547e-08, No Iterations 0 ExecutionTime = 17.05 s ClockTime = 618 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.36713e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 930 | t 0.00929 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009290 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009290 was stored. Time = 0.0093 DICPBiCGStab: Solving for T, Initial residual = 0.000139882, Final residual = 1.12723e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.12658e-08, Final residual = 1.12658e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.12658e-08, Final residual = 1.12658e-08, No Iterations 0 ExecutionTime = 17.06 s ClockTime = 619 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.36699e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 931 | t 0.0093 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009300 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009300 was stored. Time = 0.00931 DICPBiCGStab: Solving for T, Initial residual = 0.000140072, Final residual = 1.1284e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.1277e-08, Final residual = 1.1277e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.1277e-08, Final residual = 1.1277e-08, No Iterations 0 ExecutionTime = 17.08 s ClockTime = 619 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.367e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 932 | t 0.00931 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009310 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009310 was stored. Time = 0.00932 DICPBiCGStab: Solving for T, Initial residual = 0.000140271, Final residual = 1.12961e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.12886e-08, Final residual = 1.12886e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.12886e-08, Final residual = 1.12886e-08, No Iterations 0 ExecutionTime = 17.1 s ClockTime = 620 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.36705e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 933 | t 0.00932 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009320 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009320 was stored. Time = 0.00933 DICPBiCGStab: Solving for T, Initial residual = 0.000140468, Final residual = 1.1309e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.13011e-08, Final residual = 1.13011e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.13011e-08, Final residual = 1.13011e-08, No Iterations 0 ExecutionTime = 17.11 s ClockTime = 621 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.36713e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 934 | t 0.00933 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009330 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009330 was stored. Time = 0.00934 DICPBiCGStab: Solving for T, Initial residual = 0.000140679, Final residual = 1.13217e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.13136e-08, Final residual = 1.13136e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.13136e-08, Final residual = 1.13136e-08, No Iterations 0 ExecutionTime = 17.13 s ClockTime = 621 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.36723e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 935 | t 0.00934 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009340 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009340 was stored. Time = 0.00935 DICPBiCGStab: Solving for T, Initial residual = 0.000140892, Final residual = 1.1334e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.13256e-08, Final residual = 1.13256e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.13256e-08, Final residual = 1.13256e-08, No Iterations 0 ExecutionTime = 17.14 s ClockTime = 622 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.36745e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 936 | t 0.00935 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009350 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009350 was stored. Time = 0.00936 DICPBiCGStab: Solving for T, Initial residual = 0.000141115, Final residual = 1.13458e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.13373e-08, Final residual = 1.13373e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.13373e-08, Final residual = 1.13373e-08, No Iterations 0 ExecutionTime = 17.16 s ClockTime = 622 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.36776e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 937 | t 0.00936 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009360 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009360 was stored. Time = 0.00937 DICPBiCGStab: Solving for T, Initial residual = 0.000141348, Final residual = 1.13571e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.13484e-08, Final residual = 1.13484e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.13484e-08, Final residual = 1.13484e-08, No Iterations 0 ExecutionTime = 17.18 s ClockTime = 623 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.36808e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 938 | t 0.00937 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009370 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009370 was stored. Time = 0.00938 DICPBiCGStab: Solving for T, Initial residual = 0.000141586, Final residual = 1.13685e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.13597e-08, Final residual = 1.13597e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.13597e-08, Final residual = 1.13597e-08, No Iterations 0 ExecutionTime = 17.19 s ClockTime = 624 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.36849e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 939 | t 0.00938 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009380 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009380 was stored. Time = 0.00939 DICPBiCGStab: Solving for T, Initial residual = 0.000141836, Final residual = 1.13797e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.13708e-08, Final residual = 1.13708e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.13708e-08, Final residual = 1.13708e-08, No Iterations 0 ExecutionTime = 17.21 s ClockTime = 624 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.36906e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 940 | t 0.00939 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009390 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009390 was stored. Time = 0.0094 DICPBiCGStab: Solving for T, Initial residual = 0.000142114, Final residual = 1.13922e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.13833e-08, Final residual = 1.13833e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.13833e-08, Final residual = 1.13833e-08, No Iterations 0 ExecutionTime = 17.22 s ClockTime = 625 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.3698e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 941 | t 0.0094 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009400 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009400 was stored. Time = 0.00941 DICPBiCGStab: Solving for T, Initial residual = 0.0001424, Final residual = 1.1405e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.13961e-08, Final residual = 1.13961e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.13961e-08, Final residual = 1.13961e-08, No Iterations 0 ExecutionTime = 17.24 s ClockTime = 625 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.37069e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 942 | t 0.00941 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009410 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009410 was stored. Time = 0.00942 DICPBiCGStab: Solving for T, Initial residual = 0.000142698, Final residual = 1.14197e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.14108e-08, Final residual = 1.14108e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.14108e-08, Final residual = 1.14108e-08, No Iterations 0 ExecutionTime = 17.26 s ClockTime = 626 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.37166e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 943 | t 0.00942 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009420 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009420 was stored. Time = 0.00943 DICPBiCGStab: Solving for T, Initial residual = 0.000142999, Final residual = 1.14346e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.14255e-08, Final residual = 1.14255e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.14255e-08, Final residual = 1.14255e-08, No Iterations 0 ExecutionTime = 17.27 s ClockTime = 627 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.37266e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 944 | t 0.00943 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009430 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009430 was stored. Time = 0.00944 DICPBiCGStab: Solving for T, Initial residual = 0.000143297, Final residual = 1.14528e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.14437e-08, Final residual = 1.14437e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.14437e-08, Final residual = 1.14437e-08, No Iterations 0 ExecutionTime = 17.29 s ClockTime = 627 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.37364e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 945 | t 0.00944 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009440 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009440 was stored. Time = 0.00945 DICPBiCGStab: Solving for T, Initial residual = 0.000143595, Final residual = 1.1478e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.14688e-08, Final residual = 1.14688e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.14688e-08, Final residual = 1.14688e-08, No Iterations 0 ExecutionTime = 17.3 s ClockTime = 628 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.37466e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 946 | t 0.00945 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009450 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009450 was stored. Time = 0.00946 DICPBiCGStab: Solving for T, Initial residual = 0.000143888, Final residual = 1.15075e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.14982e-08, Final residual = 1.14982e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.14982e-08, Final residual = 1.14982e-08, No Iterations 0 ExecutionTime = 17.32 s ClockTime = 629 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.37577e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 947 | t 0.00946 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009460 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009460 was stored. Time = 0.00947 DICPBiCGStab: Solving for T, Initial residual = 0.000144187, Final residual = 1.15396e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.15302e-08, Final residual = 1.15302e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.15302e-08, Final residual = 1.15302e-08, No Iterations 0 ExecutionTime = 17.34 s ClockTime = 629 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.37688e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 948 | t 0.00947 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009470 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009470 was stored. Time = 0.00948 DICPBiCGStab: Solving for T, Initial residual = 0.000144499, Final residual = 1.15717e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.15623e-08, Final residual = 1.15623e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.15623e-08, Final residual = 1.15623e-08, No Iterations 0 ExecutionTime = 17.35 s ClockTime = 630 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.37806e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 949 | t 0.00948 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009480 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009480 was stored. Time = 0.00949 DICPBiCGStab: Solving for T, Initial residual = 0.000144814, Final residual = 1.1605e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.15955e-08, Final residual = 1.15955e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.15955e-08, Final residual = 1.15955e-08, No Iterations 0 ExecutionTime = 17.37 s ClockTime = 630 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.3793e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 950 | t 0.00949 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009490 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009490 was stored. Time = 0.0095 DICPBiCGStab: Solving for T, Initial residual = 0.000145121, Final residual = 1.16384e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.16288e-08, Final residual = 1.16288e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.16288e-08, Final residual = 1.16288e-08, No Iterations 0 ExecutionTime = 17.4 s ClockTime = 631 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.38059e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 951 | t 0.0095 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009500 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009500 was stored. Time = 0.00951 DICPBiCGStab: Solving for T, Initial residual = 0.000145428, Final residual = 1.16703e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.16607e-08, Final residual = 1.16607e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.16607e-08, Final residual = 1.16607e-08, No Iterations 0 ExecutionTime = 17.41 s ClockTime = 632 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.38188e-07, limit = 1e-06, normalization = 27179.1, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 952 | t 0.00951 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009510 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009510 was stored. Time = 0.00952 DICPBiCGStab: Solving for T, Initial residual = 0.000145745, Final residual = 1.17027e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.1693e-08, Final residual = 1.1693e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.1693e-08, Final residual = 1.1693e-08, No Iterations 0 ExecutionTime = 17.43 s ClockTime = 632 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.38321e-07, limit = 1e-06, normalization = 27179, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 953 | t 0.00952 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009520 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009520 was stored. Time = 0.00953 DICPBiCGStab: Solving for T, Initial residual = 0.000146047, Final residual = 1.17367e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.1727e-08, Final residual = 1.1727e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.1727e-08, Final residual = 1.1727e-08, No Iterations 0 ExecutionTime = 17.45 s ClockTime = 633 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.38454e-07, limit = 1e-06, normalization = 27179, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 954 | t 0.00953 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009530 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009530 was stored. Time = 0.00954 DICPBiCGStab: Solving for T, Initial residual = 0.000146332, Final residual = 1.17696e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.17598e-08, Final residual = 1.17598e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.17598e-08, Final residual = 1.17598e-08, No Iterations 0 ExecutionTime = 17.46 s ClockTime = 633 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.3859e-07, limit = 1e-06, normalization = 27179, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 955 | t 0.00954 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009540 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009540 was stored. Time = 0.00955 DICPBiCGStab: Solving for T, Initial residual = 0.000146603, Final residual = 1.18003e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.17904e-08, Final residual = 1.17904e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.17904e-08, Final residual = 1.17904e-08, No Iterations 0 ExecutionTime = 17.48 s ClockTime = 634 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.38725e-07, limit = 1e-06, normalization = 27179, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 956 | t 0.00955 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009550 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009550 was stored. Time = 0.00956 DICPBiCGStab: Solving for T, Initial residual = 0.000146846, Final residual = 1.18284e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.18184e-08, Final residual = 1.18184e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.18184e-08, Final residual = 1.18184e-08, No Iterations 0 ExecutionTime = 17.49 s ClockTime = 635 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.38853e-07, limit = 1e-06, normalization = 27179, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 957 | t 0.00956 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009560 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009560 was stored. Time = 0.00957 DICPBiCGStab: Solving for T, Initial residual = 0.000147069, Final residual = 1.18549e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.18447e-08, Final residual = 1.18447e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.18447e-08, Final residual = 1.18447e-08, No Iterations 0 ExecutionTime = 17.51 s ClockTime = 635 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.38977e-07, limit = 1e-06, normalization = 27179, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 958 | t 0.00957 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009570 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009570 was stored. Time = 0.00958 DICPBiCGStab: Solving for T, Initial residual = 0.000147271, Final residual = 1.18818e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.18714e-08, Final residual = 1.18714e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.18714e-08, Final residual = 1.18714e-08, No Iterations 0 ExecutionTime = 17.52 s ClockTime = 636 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.39096e-07, limit = 1e-06, normalization = 27179, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 959 | t 0.00958 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009580 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009580 was stored. Time = 0.00959 DICPBiCGStab: Solving for T, Initial residual = 0.000147446, Final residual = 1.19068e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.18962e-08, Final residual = 1.18962e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.18962e-08, Final residual = 1.18962e-08, No Iterations 0 ExecutionTime = 17.53 s ClockTime = 637 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.39207e-07, limit = 1e-06, normalization = 27179, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 960 | t 0.00959 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009590 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009590 was stored. Time = 0.0096 DICPBiCGStab: Solving for T, Initial residual = 0.000147589, Final residual = 1.19303e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.19195e-08, Final residual = 1.19195e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.19195e-08, Final residual = 1.19195e-08, No Iterations 0 ExecutionTime = 17.55 s ClockTime = 637 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.39316e-07, limit = 1e-06, normalization = 27179, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 961 | t 0.0096 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009600 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009600 was stored. Time = 0.00961 DICPBiCGStab: Solving for T, Initial residual = 0.000147709, Final residual = 1.19549e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.19429e-08, Final residual = 1.19429e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.19429e-08, Final residual = 1.19429e-08, No Iterations 0 ExecutionTime = 17.57 s ClockTime = 638 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.39428e-07, limit = 1e-06, normalization = 27179, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 962 | t 0.00961 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009610 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009610 was stored. Time = 0.00962 DICPBiCGStab: Solving for T, Initial residual = 0.000147787, Final residual = 1.19788e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.19664e-08, Final residual = 1.19664e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.19664e-08, Final residual = 1.19664e-08, No Iterations 0 ExecutionTime = 17.59 s ClockTime = 638 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.39534e-07, limit = 1e-06, normalization = 27179, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 963 | t 0.00962 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009620 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009620 was stored. Time = 0.00963 DICPBiCGStab: Solving for T, Initial residual = 0.00014782, Final residual = 1.19997e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.19867e-08, Final residual = 1.19867e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.19867e-08, Final residual = 1.19867e-08, No Iterations 0 ExecutionTime = 17.61 s ClockTime = 639 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.39633e-07, limit = 1e-06, normalization = 27179, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 964 | t 0.00963 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009630 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009630 was stored. Time = 0.00964 DICPBiCGStab: Solving for T, Initial residual = 0.000147811, Final residual = 1.20203e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.20067e-08, Final residual = 1.20067e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.20067e-08, Final residual = 1.20067e-08, No Iterations 0 ExecutionTime = 17.62 s ClockTime = 640 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.39731e-07, limit = 1e-06, normalization = 27179, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 965 | t 0.00964 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009640 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009640 was stored. Time = 0.00965 DICPBiCGStab: Solving for T, Initial residual = 0.000147741, Final residual = 1.20382e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.20239e-08, Final residual = 1.20239e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.20239e-08, Final residual = 1.20239e-08, No Iterations 0 ExecutionTime = 17.64 s ClockTime = 640 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.39832e-07, limit = 1e-06, normalization = 27179, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 966 | t 0.00965 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009650 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009650 was stored. Time = 0.00966 DICPBiCGStab: Solving for T, Initial residual = 0.000147608, Final residual = 1.20561e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.2041e-08, Final residual = 1.2041e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.2041e-08, Final residual = 1.2041e-08, No Iterations 0 ExecutionTime = 17.65 s ClockTime = 641 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.39937e-07, limit = 1e-06, normalization = 27179, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 967 | t 0.00966 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009660 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009660 was stored. Time = 0.00967 DICPBiCGStab: Solving for T, Initial residual = 0.000147442, Final residual = 1.20713e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.20552e-08, Final residual = 1.20552e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.20552e-08, Final residual = 1.20552e-08, No Iterations 0 ExecutionTime = 17.66 s ClockTime = 641 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.40047e-07, limit = 1e-06, normalization = 27179, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 968 | t 0.00967 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009670 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009670 was stored. Time = 0.00968 DICPBiCGStab: Solving for T, Initial residual = 0.000147356, Final residual = 1.20829e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.20657e-08, Final residual = 1.20657e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.20657e-08, Final residual = 1.20657e-08, No Iterations 0 ExecutionTime = 17.69 s ClockTime = 642 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.40169e-07, limit = 1e-06, normalization = 27179, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 969 | t 0.00968 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009680 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009680 was stored. Time = 0.00969 DICPBiCGStab: Solving for T, Initial residual = 0.000147314, Final residual = 1.2094e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.20767e-08, Final residual = 1.20767e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.20767e-08, Final residual = 1.20767e-08, No Iterations 0 ExecutionTime = 17.7 s ClockTime = 643 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.40313e-07, limit = 1e-06, normalization = 27179, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 970 | t 0.00969 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009690 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009690 was stored. Time = 0.0097 DICPBiCGStab: Solving for T, Initial residual = 0.000147296, Final residual = 1.21047e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.20868e-08, Final residual = 1.20868e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.20868e-08, Final residual = 1.20868e-08, No Iterations 0 ExecutionTime = 17.72 s ClockTime = 643 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.40493e-07, limit = 1e-06, normalization = 27179, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 971 | t 0.0097 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009700 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009700 was stored. Time = 0.00971 DICPBiCGStab: Solving for T, Initial residual = 0.000147431, Final residual = 1.21199e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.21006e-08, Final residual = 1.21006e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.21006e-08, Final residual = 1.21006e-08, No Iterations 0 ExecutionTime = 17.73 s ClockTime = 644 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.40724e-07, limit = 1e-06, normalization = 27179, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 972 | t 0.00971 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009710 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009710 was stored. Time = 0.00972 DICPBiCGStab: Solving for T, Initial residual = 0.000147702, Final residual = 1.21388e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.21176e-08, Final residual = 1.21176e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.21176e-08, Final residual = 1.21176e-08, No Iterations 0 ExecutionTime = 17.75 s ClockTime = 645 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.41005e-07, limit = 1e-06, normalization = 27179, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 973 | t 0.00972 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009720 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009720 was stored. Time = 0.00973 DICPBiCGStab: Solving for T, Initial residual = 0.000147973, Final residual = 1.21635e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.21336e-08, Final residual = 1.21336e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.21336e-08, Final residual = 1.21336e-08, No Iterations 0 ExecutionTime = 17.77 s ClockTime = 645 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.41348e-07, limit = 1e-06, normalization = 27179, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 974 | t 0.00973 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009730 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009730 was stored. Time = 0.00974 DICPBiCGStab: Solving for T, Initial residual = 0.000148246, Final residual = 1.21888e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.21564e-08, Final residual = 1.21564e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.21564e-08, Final residual = 1.21564e-08, No Iterations 0 ExecutionTime = 17.78 s ClockTime = 646 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.41778e-07, limit = 1e-06, normalization = 27179, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 975 | t 0.00974 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009740 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009740 was stored. Time = 0.00975 DICPBiCGStab: Solving for T, Initial residual = 0.000148683, Final residual = 1.22287e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.21932e-08, Final residual = 1.21932e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.21932e-08, Final residual = 1.21932e-08, No Iterations 0 ExecutionTime = 17.8 s ClockTime = 647 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.42318e-07, limit = 1e-06, normalization = 27179, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 976 | t 0.00975 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009750 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009750 was stored. Time = 0.00976 DICPBiCGStab: Solving for T, Initial residual = 0.000149227, Final residual = 1.22843e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.22424e-08, Final residual = 1.22424e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.22424e-08, Final residual = 1.22424e-08, No Iterations 0 ExecutionTime = 17.82 s ClockTime = 647 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.42978e-07, limit = 1e-06, normalization = 27179, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 977 | t 0.00976 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009760 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009760 was stored. Time = 0.00977 DICPBiCGStab: Solving for T, Initial residual = 0.000149831, Final residual = 1.23437e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.22984e-08, Final residual = 1.22984e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.22984e-08, Final residual = 1.22984e-08, No Iterations 0 ExecutionTime = 17.83 s ClockTime = 648 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.43778e-07, limit = 1e-06, normalization = 27179, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 978 | t 0.00977 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009770 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009770 was stored. Time = 0.00978 DICPBiCGStab: Solving for T, Initial residual = 0.000150593, Final residual = 1.24177e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.23728e-08, Final residual = 1.23728e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.23728e-08, Final residual = 1.23728e-08, No Iterations 0 ExecutionTime = 17.85 s ClockTime = 648 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.44761e-07, limit = 1e-06, normalization = 27179, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 979 | t 0.00978 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009780 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009780 was stored. Time = 0.00979 DICPBiCGStab: Solving for T, Initial residual = 0.000151603, Final residual = 1.25003e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.24535e-08, Final residual = 1.24535e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.24535e-08, Final residual = 1.24535e-08, No Iterations 0 ExecutionTime = 17.87 s ClockTime = 649 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.45966e-07, limit = 1e-06, normalization = 27179, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 980 | t 0.00979 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009790 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009790 was stored. Time = 0.0098 DICPBiCGStab: Solving for T, Initial residual = 0.000152851, Final residual = 1.25835e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.25358e-08, Final residual = 1.25358e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.25358e-08, Final residual = 1.25358e-08, No Iterations 0 ExecutionTime = 17.89 s ClockTime = 650 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.47435e-07, limit = 1e-06, normalization = 27179, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 981 | t 0.0098 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009800 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009800 was stored. Time = 0.00981 DICPBiCGStab: Solving for T, Initial residual = 0.000154188, Final residual = 1.26821e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.26326e-08, Final residual = 1.26326e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.26326e-08, Final residual = 1.26326e-08, No Iterations 0 ExecutionTime = 17.9 s ClockTime = 650 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.49212e-07, limit = 1e-06, normalization = 27179, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 982 | t 0.00981 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009810 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009810 was stored. Time = 0.00982 DICPBiCGStab: Solving for T, Initial residual = 0.00015573, Final residual = 1.2804e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.27531e-08, Final residual = 1.27531e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.27531e-08, Final residual = 1.27531e-08, No Iterations 0 ExecutionTime = 17.92 s ClockTime = 651 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.51349e-07, limit = 1e-06, normalization = 27179, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 983 | t 0.00982 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009820 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009820 was stored. Time = 0.00983 DICPBiCGStab: Solving for T, Initial residual = 0.000157471, Final residual = 1.2953e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.29026e-08, Final residual = 1.29026e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.29026e-08, Final residual = 1.29026e-08, No Iterations 0 ExecutionTime = 17.93 s ClockTime = 652 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.53898e-07, limit = 1e-06, normalization = 27179, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 984 | t 0.00983 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009830 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009830 was stored. Time = 0.00984 DICPBiCGStab: Solving for T, Initial residual = 0.000159471, Final residual = 1.31173e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.30648e-08, Final residual = 1.30648e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.30648e-08, Final residual = 1.30648e-08, No Iterations 0 ExecutionTime = 17.95 s ClockTime = 652 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.56919e-07, limit = 1e-06, normalization = 27179, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 985 | t 0.00984 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009840 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009840 was stored. Time = 0.00985 DICPBiCGStab: Solving for T, Initial residual = 0.000161755, Final residual = 1.32954e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.32456e-08, Final residual = 1.32456e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.32456e-08, Final residual = 1.32456e-08, No Iterations 0 ExecutionTime = 17.96 s ClockTime = 653 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.60471e-07, limit = 1e-06, normalization = 27179, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 986 | t 0.00985 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009850 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009850 was stored. Time = 0.00986 DICPBiCGStab: Solving for T, Initial residual = 0.000164214, Final residual = 1.34877e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.34398e-08, Final residual = 1.34398e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.34398e-08, Final residual = 1.34398e-08, No Iterations 0 ExecutionTime = 17.99 s ClockTime = 653 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.64616e-07, limit = 1e-06, normalization = 27179, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 987 | t 0.00986 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009860 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009860 was stored. Time = 0.00987 DICPBiCGStab: Solving for T, Initial residual = 0.000167016, Final residual = 1.37078e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.36618e-08, Final residual = 1.36618e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.36618e-08, Final residual = 1.36618e-08, No Iterations 0 ExecutionTime = 18 s ClockTime = 654 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.69417e-07, limit = 1e-06, normalization = 27179, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 988 | t 0.00987 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009870 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009870 was stored. Time = 0.00988 DICPBiCGStab: Solving for T, Initial residual = 0.00017008, Final residual = 1.39452e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.39015e-08, Final residual = 1.39015e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.39015e-08, Final residual = 1.39015e-08, No Iterations 0 ExecutionTime = 18.02 s ClockTime = 655 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.74939e-07, limit = 1e-06, normalization = 27179, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 989 | t 0.00988 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009880 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009880 was stored. Time = 0.00989 DICPBiCGStab: Solving for T, Initial residual = 0.000173618, Final residual = 1.42172e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.41704e-08, Final residual = 1.41704e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.41704e-08, Final residual = 1.41704e-08, No Iterations 0 ExecutionTime = 18.03 s ClockTime = 655 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.81239e-07, limit = 1e-06, normalization = 27179, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 990 | t 0.00989 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009890 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009890 was stored. Time = 0.0099 DICPBiCGStab: Solving for T, Initial residual = 0.000177752, Final residual = 1.45252e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.44626e-08, Final residual = 1.44626e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.44626e-08, Final residual = 1.44626e-08, No Iterations 0 ExecutionTime = 18.05 s ClockTime = 656 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.88385e-07, limit = 1e-06, normalization = 27179, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 991 | t 0.0099 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009900 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009900 was stored. Time = 0.00991 DICPBiCGStab: Solving for T, Initial residual = 0.00018225, Final residual = 1.48538e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.47765e-08, Final residual = 1.47765e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.47765e-08, Final residual = 1.47765e-08, No Iterations 0 ExecutionTime = 18.07 s ClockTime = 656 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 1.9644e-07, limit = 1e-06, normalization = 27179, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 992 | t 0.00991 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009910 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009910 was stored. Time = 0.00992 DICPBiCGStab: Solving for T, Initial residual = 0.000187184, Final residual = 1.521e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.51156e-08, Final residual = 1.51156e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.51156e-08, Final residual = 1.51156e-08, No Iterations 0 ExecutionTime = 18.08 s ClockTime = 657 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.0547e-07, limit = 1e-06, normalization = 27179, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 993 | t 0.00992 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009920 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009920 was stored. Time = 0.00993 DICPBiCGStab: Solving for T, Initial residual = 0.000192753, Final residual = 1.55989e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.54865e-08, Final residual = 1.54865e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.54865e-08, Final residual = 1.54865e-08, No Iterations 0 ExecutionTime = 18.09 s ClockTime = 658 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.15544e-07, limit = 1e-06, normalization = 27179, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 994 | t 0.00993 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009930 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009930 was stored. Time = 0.00994 DICPBiCGStab: Solving for T, Initial residual = 0.000198967, Final residual = 1.60081e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.5882e-08, Final residual = 1.5882e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.5882e-08, Final residual = 1.5882e-08, No Iterations 0 ExecutionTime = 18.11 s ClockTime = 658 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.26721e-07, limit = 1e-06, normalization = 27179, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 995 | t 0.00994 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009940 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009940 was stored. Time = 0.00995 DICPBiCGStab: Solving for T, Initial residual = 0.000205717, Final residual = 1.64441e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.63135e-08, Final residual = 1.63135e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.63135e-08, Final residual = 1.63135e-08, No Iterations 0 ExecutionTime = 18.13 s ClockTime = 659 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.39071e-07, limit = 1e-06, normalization = 27179, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 996 | t 0.00995 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009950 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009950 was stored. Time = 0.00996 DICPBiCGStab: Solving for T, Initial residual = 0.000212993, Final residual = 1.6908e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.67806e-08, Final residual = 1.67806e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.67806e-08, Final residual = 1.67806e-08, No Iterations 0 ExecutionTime = 18.14 s ClockTime = 660 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.52667e-07, limit = 1e-06, normalization = 27179, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 997 | t 0.00996 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009960 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009960 was stored. Time = 0.00997 DICPBiCGStab: Solving for T, Initial residual = 0.00022097, Final residual = 1.74189e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.72946e-08, Final residual = 1.72946e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.72946e-08, Final residual = 1.72946e-08, No Iterations 0 ExecutionTime = 18.15 s ClockTime = 660 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.6759e-07, limit = 1e-06, normalization = 27179, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 998 | t 0.00997 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009970 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009970 was stored. Time = 0.00998 DICPBiCGStab: Solving for T, Initial residual = 0.000229701, Final residual = 1.79954e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.7874e-08, Final residual = 1.7874e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.7874e-08, Final residual = 1.7874e-08, No Iterations 0 ExecutionTime = 18.17 s ClockTime = 661 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 2.83928e-07, limit = 1e-06, normalization = 27179, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 999 | t 0.00998 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009980 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009980 was stored. Time = 0.00999 DICPBiCGStab: Solving for T, Initial residual = 0.000239256, Final residual = 1.86554e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.85336e-08, Final residual = 1.85336e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.85336e-08, Final residual = 1.85336e-08, No Iterations 0 ExecutionTime = 18.19 s ClockTime = 661 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.01768e-07, limit = 1e-06, normalization = 27179, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 1000 | t 0.00999 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing yes | dt complete yes | write-iteration-checkpoint | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] [DEBUG] Writing a checkpoint... ---[preciceAdapter] [DEBUG] Stored time value t = 0.009990 ---[preciceAdapter] [DEBUG] Checkpoint for time t = 0.009990 was stored. Time = 0.01 DICPBiCGStab: Solving for T, Initial residual = 0.000249656, Final residual = 1.94058e-08, No Iterations 1 DICPBiCGStab: Solving for T, Initial residual = 1.92736e-08, Final residual = 1.92736e-08, No Iterations 0 DICPBiCGStab: Solving for T, Initial residual = 1.92736e-08, Final residual = 1.92736e-08, No Iterations 0 ExecutionTime = 18.3 s ClockTime = 663 s ---[preciceAdapter] [DEBUG] Writing coupling data... ---[preciceAdapter] [DEBUG] Advancing preCICE... ---[precice]  relative convergence measure: relative two-norm diff = 3.21208e-07, limit = 1e-06, normalization = 27179, conv = true ---[precice]  All converged ---[precice]  Time window completed ---[precice]  it 1 of 1 | dt# 1001 | t 0.01 of 0.01 | dt 1e-05 | max dt 1e-05 | ongoing no | dt complete yes | ---[preciceAdapter] [DEBUG] Reading coupling data... ---[preciceAdapter] [DEBUG] Adjusting the solver's timestep... ---[preciceAdapter] [DEBUG] The solver's timestep is the same as the coupling timestep. ---[preciceAdapter] The coupling timestep completed. Writing the updated results. ---[preciceAdapter] The coupling completed. ---[preciceAdapter] [DEBUG] Finalizing the preCICE solver interface... ---[preciceAdapter] [DEBUG] Destroying the preCICE solver interface... ---[preciceAdapter] [DEBUG] Deleting the interfaces... ---[preciceAdapter] [DEBUG] Deleting the checkpoints... ---[preciceAdapter] [DEBUG] Destroying the CHT module... ---[preciceAdapter] The simulation was ended by preCICE. Calling the end() methods of any functionObject explicitly. End