# \#restart

**URL:** https://precice.discourse.group/tag/restart/132.md

[Latest](https://precice.discourse.group/latest.md) · [Categories](https://precice.discourse.group/categories.md) · [Tags](https://precice.discourse.group/tags.md)

---

## [Another post on restarting for FSI simulation (FASTEST/CalculiX/preCICE)](https://precice.discourse.group/t/another-post-on-restarting-for-fsi-simulation-fastest-calculix-precice/2945)

<div class="topic-metadata">

**Author:** [@gdenayer](https://precice.discourse.group/u/gdenayer)\
**Replies:** 11\
**Last updated:** [July 20, 2026, 7:45am UTC](https://precice.discourse.group/t/another-post-on-restarting-for-fsi-simulation-fastest-calculix-precice/2945 "2026-07-20T07:45:33Z")

</div>

Dear preCICE community, I have a running FSI simulation using our CFD solver (FASTEST-3D) coupled with the CSD solver CalculiX via preCICE. The coupled simulation is stable and the results look physically reasonable. Si…

---

## [How do I resume running the example after it has been interrupted?](https://precice.discourse.group/t/how-do-i-resume-running-the-example-after-it-has-been-interrupted/2930)

<div class="topic-metadata">

**Author:** [@HHao-gihub](https://precice.discourse.group/u/HHao-gihub)\
**Replies:** 1\
**Last updated:** [April 22, 2026, 4:14pm UTC](https://precice.discourse.group/t/how-do-i-resume-running-the-example-after-it-has-been-interrupted/2930 "2026-04-22T16:14:36Z")

</div>

I encountered a case interruption due to a power outage while running a coupled OpenFOAM and Calculix simulation. How can I resume the simulation?

---

## [How to restart a coupled OpenFOAM–CalculiX FSI simulation with preCICE?](https://precice.discourse.group/t/how-to-restart-a-coupled-openfoam-calculix-fsi-simulation-with-precice/2910)

<div class="topic-metadata">

**Author:** [@Roham](https://precice.discourse.group/u/Roham)\
**Replies:** 2\
**Last updated:** [April 14, 2026, 5:38pm UTC](https://precice.discourse.group/t/how-to-restart-a-coupled-openfoam-calculix-fsi-simulation-with-precice/2910 "2026-04-14T17:38:58Z")

</div>

I am running a coupled OpenFOAM–CalculiX FSI simulation on an HPC cluster. Since the simulation is computationally expensive, it takes several weeks to complete. However, due to cluster job time limits, I can only run jo…

---

## [Restart after stopping calculation](https://precice.discourse.group/t/restart-after-stopping-calculation/72)

<div class="topic-metadata">

**Author:** [@jsu](https://precice.discourse.group/u/jsu)\
**Replies:** 1\
**Last updated:** [October 29, 2019, 5:11pm UTC](https://precice.discourse.group/t/restart-after-stopping-calculation/72 "2019-10-29T17:11:18Z")

</div>

I’m calculating openfoam-calculix CHT steady-state. I want to calculate until t = 500 and then stop the calculation to change the URF and perform the calculation again. But the calculation is performed again from t = 1…