# FSI: advection of sphere by viscous drag

**URL:** <https://precice.discourse.group/t/fsi-advection-of-sphere-by-viscous-drag/705>\
**Category:** Official adapters and tutorials\
**Tags:** fsi\
**Created:** [August 31, 2021, 6:49am UTC](https://precice.discourse.group/t/fsi-advection-of-sphere-by-viscous-drag/705 "2021-08-31T06:49:56Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Fran](https://avatars.discourse-cdn.com/v4/letter/f/a4c791/32.png) [@Fran](https://precice.discourse.group/u/Fran)\
**Post date:** [August 31, 2021, 6:49am UTC](https://precice.discourse.group/t/fsi-advection-of-sphere-by-viscous-drag/705/1 "2021-08-31T06:49:56Z")

</div>

Hi Im new to this forum.

I’ve been using OpenFOAM for a few years and FSI have been attracted my attention all the time.

At the moment I would like to simulate the movement of a sphere inside a tube or channel, or even open flow (air). Initially the sphere is rigid, but eventually I would like to set some mechanical properties and study sphere deformation due to flow or contact with walls.

If you are aware of any tutorial I can do to start Id be very grateful for your help. I have some experience in FEA (ansys) but I have installed calculix and dealii as well and Im doing some tuts.

Cheers  
Fran

---

<div class="post-metadata">

**Author:** ![uekerman](https://yyz2.discourse-cdn.com/free1/user_avatar/precice.discourse.group/uekerman/32/2199_2.png) [@uekerman](https://precice.discourse.group/u/uekerman)\
**Post date:** [August 31, 2021, 8:28am UTC](https://precice.discourse.group/t/fsi-advection-of-sphere-by-viscous-drag/705/2 "2021-08-31T08:28:42Z")

</div>

Welcome @Fran 👋

I recommend to start with the quickstart case:

[https://precice.org/quickstart.html](https://precice.org/quickstart.html)

And then probably the perpendicular flap:

[https://precice.org/tutorials-perpendicular-flap.html](https://precice.org/tutorials-perpendicular-flap.html)

Already a word of advice about the sphere case you want to do: the current OpenFOAM adapter uses a moving mesh (interface capturing) approach. You will not be able to move the sphere tooo much.

---

<div class="post-metadata">

**Author:** ![Fran](https://avatars.discourse-cdn.com/v4/letter/f/a4c791/32.png) [@Fran](https://precice.discourse.group/u/Fran)\
**Post date:** [August 31, 2021, 9:42am UTC](https://precice.discourse.group/t/fsi-advection-of-sphere-by-viscous-drag/705/3 "2021-08-31T09:42:27Z")

</div>

Hi Ben

thanks for your reply!

I have started with the tutorials, thank you.

Do you mean with current FV FE methods it is not possible to simulate Rigid (or Deformable) Body Movement of a solid due to advection?

---

<div class="post-metadata">

**Author:** ![uekerman](https://yyz2.discourse-cdn.com/free1/user_avatar/precice.discourse.group/uekerman/32/2199_2.png) [@uekerman](https://precice.discourse.group/u/uekerman)\
**Post date:** [September 6, 2021, 9:04am UTC](https://precice.discourse.group/t/fsi-advection-of-sphere-by-viscous-drag/705/4 "2021-09-06T09:04:39Z")

</div>

> [@Fran](#):
>
> Do you mean with current FV FE methods it is not possible to simulate Rigid (or Deformable) Body Movement of a solid due to advection?

No, in principle this is possible, but if you move your sphere from the very left to the very right of your channel, your mesh will get too distorted.
