# Community projects

**URL:** https://precice.discourse.group/c/community-projects/11.md

[Latest](https://precice.discourse.group/latest.md) · [Categories](https://precice.discourse.group/categories.md) · [Tags](https://precice.discourse.group/tags.md)

---

## [About the Community projects category](https://precice.discourse.group/t/about-the-community-projects-category/562)

<div class="topic-metadata">

**Author:** [@Makis](https://precice.discourse.group/u/Makis)\
**Replies:** 0

</div>

Share your simulation cases for everybody to admire and try. Did you make a nice simulation case that you want to share with the rest of the community so that everybody can run it and build upon this? Please open a thre…

---

## [FSI with FenicsX and preCICE 3](https://precice.discourse.group/t/fsi-with-fenicsx-and-precice-3/1966)

<div class="topic-metadata">

**Author:** [@efirvida](https://precice.discourse.group/u/efirvida)\
**Replies:** 2\
**Last updated:** [July 16, 2024, 7:33pm UTC](https://precice.discourse.group/t/fsi-with-fenicsx-and-precice-3/1966 "2024-07-16T19:33:03Z")

</div>

Dear all, I dont know if here is the rigth place to post this, but as I need quick help I think that here is a good better place than in github isses. I need to implement FSi coupling preCICE+OpenFOAM+FenicsX, but as I…

---

## [FSI coupling between OpenFOAM and MBDyn of a cycloidal rotor](https://precice.discourse.group/t/fsi-coupling-between-openfoam-and-mbdyn-of-a-cycloidal-rotor/912)

<div class="topic-metadata">

**Author:** [@JulianSchl](https://precice.discourse.group/u/JulianSchl)\
**Replies:** 11\
**Last updated:** [March 16, 2024, 1:37pm UTC](https://precice.discourse.group/t/fsi-coupling-between-openfoam-and-mbdyn-of-a-cycloidal-rotor/912 "2024-03-16T13:37:58Z")

</div>

In this project a FSI coupling was established together with @louisgag to investigate the influence of rotor blade deformation of cycloidal rotors and its effect on the rotor efficiency. The preCICE OpenFOAM adapter use…

---

## [Impeller Pump - Simulating Stress on Impeller](https://precice.discourse.group/t/impeller-pump-simulating-stress-on-impeller/1584)

<div class="topic-metadata">

**Author:** [@joeman](https://precice.discourse.group/u/joeman)\
**Replies:** 1\
**Last updated:** [September 20, 2023, 10:10pm UTC](https://precice.discourse.group/t/impeller-pump-simulating-stress-on-impeller/1584 "2023-09-20T22:10:24Z")

</div>

My name is Joseph Turner and I’ve been designing a very high speed electric pump for the last 6 months. Setup Here is a screenshot of pump; well a cutout doh I can only add three images into posts because I’m new! I’l…

---

## [Turek-Hron FSI 2 Benchmark](https://precice.discourse.group/t/turek-hron-fsi-2-benchmark/573)

<div class="topic-metadata">

**Author:** [@Ulrich](https://precice.discourse.group/u/Ulrich)\
**Replies:** 2\
**Last updated:** [October 26, 2022, 8:16am UTC](https://precice.discourse.group/t/turek-hron-fsi-2-benchmark/573 "2022-10-26T08:16:05Z")

</div>

Dear all, As promised during the preCICE-Workshop, we would like to share our case for the Turek-Hron FSI 2 benchmark. The benchmark is described here: http://www.featflow.de/en/benchmarks/cfdbenchmarking/fsi\_benchmark…

---

## [Coupled Phase-Field Brittle Fracture Simulation](https://precice.discourse.group/t/coupled-phase-field-brittle-fracture-simulation/563)

<div class="topic-metadata">

**Author:** [@uekerman](https://precice.discourse.group/u/uekerman)\
**Replies:** 0\
**Last updated:** [April 14, 2021, 7:15pm UTC](https://precice.discourse.group/t/coupled-phase-field-brittle-fracture-simulation/563 "2021-04-14T19:15:39Z")

</div>

A phase-field brittle fracture mechanics code written in Nutils is coupled to a Poisson equation in FEniCS or DOLFIN. The FEniCS code is a place-holder for a proper corrosion model. The purpose of this code is to showcas…